Products in Footwear: Silicones

SIPELL® RE 55 M is a highly efficient silicone-based water repellent for leather that includes an incorporated catalyst. The product can be diluted with aprotic organic solvents such as ketones and hydrocarbons. It is well-suited for the post-treatment of leather goods, safety clothing, and sports shoes, providing effective water repellency.

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

Chengdu Silike Technology NM-1Y is a pelletized formulation with 50% UHMW Siloxane polymer dispersed in SBS .It is Particularly developed for SBS or SBS compatible resin system to improving the final items abrasion resistance and decrease the abrasion value in the thermoplastics .

VMQ/PMQ/PVMQ Silicone or Polydimethylsiloxane Rubber to develop rubber solutions that will optimize your components performance in your applications.

GLOBALSIL are silicone rubbers, that harden at room temperature by the addition of their hardener in a condensation process.

Javachem® GM wear-resistant additive is UHMW silicone additive with special functional groups acting as anchoring effect in the resin which contributes to improved compatibility with substrates. Javachem®GM can evenly concentrate on the materials, enhance the elastic resilience, reduce friction coefficients and wear, and give the material excellent long-lasting wear resistance and anti-slip performance.

GLOBALSIL AL is suited to create plaster molds, wax molds, concrete molds and molds made with other materials such as polyester resins, polyurethane resins and many others.

GLOBALSIL BL is a low tearing strengths silicones, well suited for limited reproductions of simple molds with few undercuts.

Chengdu Silike Technology LYSI-100 is a powder formulation which contains 70% UHMW Siloxane polymer dispersed in Silica . It is particularly developed for Polyolefin masterbatches/ filler masterbatches to improve the dispersion property by better infiltrate in fillers.

Chengdu Silike Technology LYSI-100A is a powdered formulation with 55% ultra high molecular weight siloxane polymer and 45% silica . It is recommend to be used as processing aids in various thermoplastic formulations such as halogen free flame retardant wire&cable compounds , PVC compounds , engineering compounds, pipes, plastic/filler masterbatches..etc.

Silopren™ LSR 2003 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LSR2003 elastomer is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.LSR2003 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and BenefitsLSR2003 liquid silicone rubber is distinguished by the following properties: Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in consumer goods applications such as: Corn Pads Heel Inserts Shoe Insole Vibration dampers.

SILFG is a food grade red silicone sheet, In compliance with FDA 21 CFR Part 177.

Kettlitz-Dispergator SI/GR is a new generation of processing aid based on a silicone combination. The proc-ess aid has been developed especially for EPDM and EVA compounds to improve processability.

Silopren™ LSR 2610 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 2610 shows in comparison to Silopren™ LSR 2010 a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanisation temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanisate.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2610 are distinguished by the following properties: high reactivity, lower viscosity, shorter cycle time excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties, high tear resistance high stability to ozone and ultraviolet light outstanding resistance to aging, excellent dielectric behavior over a wide range of temperatures, not readily combustible, does not melt or drip easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2610 is particularly suitable for the following elastomeric articles: stoppers, vibration dampers, shoe inserts s.o.

Silopren™ LSR 2620 is a two-component liquid silicone rubber for injection molding processes.Silopren™ LSR 2620 shows in comparison to Silopren™ LSR 2020 a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanisation temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanisate.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2620 are distinguished by the following properties: high reactivity, lower viscosity, shorter cycle time excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties, high tear resistance high stability to ozone and ultraviolet light outstanding resistance to aging, excellent dielectric behavior over a wide range of temperatures, not readily combustible, does not melt or drip easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2620 is particularly suitable for the following elastomeric articles: stoppers, vibration dampers, shoe inserts s.o.

Silopren™ LSR 2010 TP 3740 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be used for a wide range of applications.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2010 TP 3740 are distinguished by the following properties: high transparent high thermal stability excellent stability and flexibility at low temperatures high stability to ozone and ultraviolet light outstanding resistance to aging excellent dielectric behavior over a wide range of temperatures not readily combustible, does not melt or drip easy-pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2010 TP 3740 is particularly suitable for the following elastomeric articles: stoppers, vibration dampers, shoe inserts s.o.