Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Products in Specialty Elastomers: Liquid Injection Molding
17 Products found in Specialty Elastomers
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® LR 3011/50 FR A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Automobile Door Seals
Features:
Low Volatility, Fast Curing, Low Flammability, Flame Retardant, Low Compression Set, Low VOC, Cost Effective, Heat Resistance
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3011/50 FR A/B is a liquid silicone rubber. It is a paste-like, low-inflammable, two-component compound. The excellent flame retardancy is confirmed by UL94-V0 listings at 0.75 mm and 3 mm thickness. Good heat resistance, low compression set, short curing times, and non-abrasive behavior in the LIM process are further benefits of this material.
Wacker Chemie AG
ELASTOSIL® LR 3170/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Liquid Injection Molding, Injection Molding
End Uses:
Automobile Door Seals
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Low Flammability, Flame Retardant, Low VOC, Cost Effective, Heat Resistance, Good Electrical Properties
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3170/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3170 series. It is a paste-like, low-inflammable, two-component compound with an extremely short curing time. The vulcanizates of this product are noted for their excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3001/55 FR A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Liquid Injection Molding, Injection Molding
End Uses:
Cable Accessories, Insulators, Automobile Door Seals
Features:
Flame Retardant, Low VOC, Cost Effective, Heat Resistance, Oil Resistant, Low Volatility, Fast Curing, Low Viscosity, Low Flammability
Tear Strength:
15.0 - 15.0 kN/m
ELASTOSIL® LR 3001/55 FR A/B is a paste-like, low-inflammable, two-component compound of liquid silicone rubber. The excellent flame retardancy is confirmed by the achieved UL94-V0 listings at 0.75 mm and 3 mm thickness and f1 rating according to UL746C: Unterwriters Laboratories File E75704 (Wacker Chemie AG). It exhibits good heat resistance, high oil resistance, and short curing times, which are further benefits of this material.
Momentive Performance Materials
LIM™ 6040
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
Tear Strength:
39.0 - 39.0 kN/m
LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.
Momentive Performance Materials
LIM™ 6010
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Footwear, Soft Touch Applications
Features:
Good Mold Release, Low Hardness, Soft Touch, Fast Curing
Tear Strength:
10.0 - 10.0 kN/m
LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.
Momentive Performance Materials
LIM™ 6030
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
Tear Strength:
31.0 - 31.0 kN/m
LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.
Momentive Performance Materials
LIM™ 8040
Tear Strength:
37.0 - 37.0 kN/m
LIM™ 8040 liquid silicone rubber is a 2-component liquid injection molding material, which offers primerless adhesion to a wide range of substrates including metals and engineering plastics. Full bond strength is reached immediately after de-molding. This makes LIM 8040 the optimal choice for cost-efficient manufacturing of high numbers of articles in integrated processes such as multicomponent injection molding or insert-molding. If properly processed, parts made from LIM 8040 can meet the requirements for food contact. The requirements are determined in 21CFR FDA paragraph 177.2600 'Rubber articles intended for repeated use. It also has been successfully tested for USP class VI. Both applications usually require a postcure.Key Features and Benefits Primer-less adhesion to many substrates Maximum adhesion immediately after de-molding High temperature stability Excellent stability and flexibility at low temperatures Outstanding aging behavior and weathering resistance Good dielectric and mechanical properties Easy pigmentable due to translucent color Potential ApplicationsLIM 8040 is particularly suitable for the manufacturing of parts, where engineering plastics and elastomeric materials need to be combined in an overmolding or co-molding process such as: sealing elements, automotive connectors, membranes, vibration dampening elements.
Momentive Performance Materials
LIM™ 6040-D2
Applications:
Tubing & Fluids Handling, Surgical Instruments & Trays, Medical Devices & Assemblies
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Tubing, Surgical Instruments, Medical Devices
LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.
Momentive Performance Materials
LIM™ 6041
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical Devices, Surgical Instruments, Medical/Healthcare Applications, Tubing
Features:
Good Mold Release, Good Tear Strength, High Tensile Strength, Fast Curing
Tear Strength:
32.0 - 32.0 kN/m
LIM™ 6041 liquid silicone rubber is a 2 component Radio - Opaque product formulated with Barium Sulfate. It is used in liquid injection molding of high performance elastomeric parts. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications in medical devices where molded parts can be detected under X-ray due it's radio opacity.Key Features and Benefits Barium Sulfate filled for excellent radio - opacity Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent tear strength and radio - opacity, it is suitable for applications in medical devices such as wound drain catheters, where molded parts can be detected under X-ray.
Momentive Performance Materials
LIM™ 6071
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.
Momentive Performance Materials
LIM™ 6061
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.
Momentive Performance Materials
LIM™ 6050-D2
Applications:
Tubing & Fluids Handling, Surgical Instruments & Trays, Medical Devices & Assemblies
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Tubing, Surgical Instruments, Medical Devices
LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.
Momentive Performance Materials
Silopren™ LSR 2003
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Footwear, General Purpose
Features:
Good Mold Release, Low Hardness, Good Colorability, General Purpose, Fast Curing, Fast Molding Cycle, Vibration Damping
Tear Strength:
4.0 - 4.0 kN/m
Silopren™ LSR 2003 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LSR2003 elastomer is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.LSR2003 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and BenefitsLSR2003 liquid silicone rubber is distinguished by the following properties: Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in consumer goods applications such as: Corn Pads Heel Inserts Shoe Insole Vibration dampers.
Momentive Performance Materials
LIM™ 6050
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
Tear Strength:
43.0 - 43.0 kN/m
LIM™ 6050 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6050 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150C (302F) to 205C (400F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.
NuSil Technology
LightSpan® LS-8941
Applications:
Other Devices & Assemblies, Devices & Assemblies
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Lenses, LEDs
LightSpan® LS-8941 is a optically clear, high durometer silicone elastomer.
Momentive Performance Materials
Silopren™ LSR 7005
Applications:
Sensors & Actuators, Consumer Electronics, Appliances & Electronics
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Liquid Silicone Rubber (LSR)
Silopren™ LSR 7005 liquid silicone rubber is a two-component, high-transparency, low-hardness, low-viscosity, fast-cure speed and ultra clear liquid silicone rubber (LSR). Providing good optical clarity, Silopren™ LSR 7005 liquid silicone rubber combines typical LSR properties, such as high temperature stability and flowability, with excellent UV and blue light stability. As a result, optical parts produced using this material can exhibit excellent durability and maintain optical clarity, even if exposed to high temperatures or UV light. The very low hardness and low modulus help enable easy assembling and coupling of molded optical elements. Silopren™ LSR 7005 liquid silicone rubber is designed to be processed through LSR injection molding technology, which can help to produce high precision optical parts even in large quantities at a high efficiency.Key Features and Typical Benefits Optical Clarity Durability Design Freedom Potential Applications Optical interfaces Rain light sensors Camera systems Optical sensors Other transparent applications.
Momentive Performance Materials
Silopren™ LIM9071 ET
Applications:
Automotive Electronics, Interior, Electrical & Electronic Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automotive Interior Parts, Automotive Electronics, Connectors
Silopren™ LIM9071 ET liquid silicone rubber is a 2-component liquid injection molding material which offers primerless adhesion to a wide range of substrates including metals and many engineering plastics, making it an ideal material for insert molding applications. LIM®9071 ET TP 3915 liquid silicone rubber is designed to be used in a 1:1 mix ratio and cures rapidly at molding temperatures of 150°C - 190°C to a high tear strength, translucent silicone elastomer.Key Features and Benefits Primerless adhesion to many substrates Maximum adhesion immediately after de-molding High temperature stability Excellent stability and flexibility at low temperatures Outstanding aging behavior and weathering resistance Good mechanical properties Easy pigmentable due to translucent color Potential ApplicationsLIM®9071 ET TP 3915 is particularly suitable for the manufacturing of parts, where engineering plastics and elastomeric materials need to be combined in an over molding or co-molding process such as sealing elements, automotive connectors, membranes vibration dampening elements, etc.