Products in Thermoset Resins: Filament Winding

USP-EAGLE (PIP50-60) is an Isophthalic based Unsaturated Polyester resin with high mechanical & chemical resistance.

Eagle Chemicals USP-EAGLE (PIP40-62) has ortho-based, very good mechanical properties, low viscosity, medium reactivity and good rigidity. Filament winding and hand lay up in pipe manufacturing

USP-EAGLE (PIP40-42) is Unsaturated Polyester resin ortho based, very good mechanical properties, low viscosity, medium reactivity, and good rigidityit is used in filament winding, hand lay-up in pipe manufacturing.

Duresco NU 461 R is a Epoxy molding compound with excellent thermal shock and chemical resistance for high temperature applications.

SIROPOL 7440 resin is medium viscosity, excellent fiber wet­out and resilient polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

SIROPOL 7241 resin is medium viscosity, excellent fiber wet­out and rigid polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

SIROPOL 992 FR resin is a medium viscosity, unprompted flame retardant vinylester-based resin. Laminates made with SIROPOL 992 FR resin have achieved Flame retardancy BS476: Part 7:1997 Class I rating with 3% antimony trioxide and Flame retardancy ASTM E-84 Class I rating with 3 % antimony trioxide.

SIROPOL 9227 resin is medium viscosity, un­promoted vinyl ester based resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

SIROPOL 992 FRA resin is a medium viscosity, unpromoted flame retardant vinylester-based resin. Laminates made with SIROPOL 992 FRA resin have achieved Flame retardancy BS476: Part 7:1997 Class I rating and Flame retardancy ASTM E-84 Class I rating as 3% antimony trioxide is added.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

DEPOL SH is a middle reactive, self-extinguishing unsaturated HET-acid based polyester resin.

Duresco NU 6110 T/NU 6110 V is a Glass fiber reinforced epoxy molding compound with very good mechanical properties for high temperature applications.

Siropol 8351 is a medium reactivity, orthophthalic polyester resin dissolved in styrene monomers. It has been especially formulated to provide rapid cure without the characteristic high exotherm normally associated with resins used in filament winding applications. SIROPOL ­ 8351 demonstrates good toughness, water resistance and is especially suited for filament winding application. SIROPOL­ 8351 is a non­promoted and no thixotropic resin with good shelf stability at elevated temperatures. Optimum properties are attained when SIROPOL­ 8351 is diluted with styrene to 175­225 cps.

Vikram Resins and Polymers VRP 2131 is a medium reactive Isophthalic Acid based Unsaturated Polyester Resin. It has better mechanical, corrosion, and electrical properties as compared to Orthophthalic Polyesters, has high water resistance and good wetting, and is fast curing. VRP 2131 is suitable for hand lay-up, RTM, pultrusion, filament winding, and other molding techniques and can be used for the manufacture of marine products, tanks, pipes, automobile parts, gratings etc. Also, it can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.

Vikram Resins and Polymers VRP 2141 is a medium reactive PTA based Unsaturated Polyester Resin. It has better mechanical, corrosion, and electrical properties as compared to Orthophthalic Polyesters, has good wetting, and is fast curing. The properties of VRP 2141 are almost exactly the same as VRP 2131. It is suitable for hand lay-up, RTM, pultrusion, filament winding, and other molding techniques and can be used for the manufacture of marine products, tanks, pipes, automobile parts, gratings etc. Also, it can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.

Siropol 1970-P is low viscosity, promoted halogenated, flame­ retardant polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420, for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.