Products in Fluids & Lubricants: Hydrocarbons

Aztec Oils Limited MOULD RELEASE CC 120 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.

Armite Lubricants VV-P-236 is a light-grade lubricating grease of superior pharmaceutical-grade quality. However, it is not recommended for use as a lubricant in heavily loaded or hot running bearings.

MultiTherm® 503 is a high quality nontoxic heat transfer fluid for use in closed loop liquid phase heating and cooling systems from 10°F to 500°F.

Dynalene HT is a high temperature heat transfer fluid that embodies all the physical and environmental qualities desired by the modern day customer. It exhibits one of the highest boiling, flash and fire points available at atmospheric pressure. Noncorrosive and highly stable, Dynalene HT is the ideal choice for dependable performance where temperatures exceed the thermal stress limitations of most competitive fluids. The low vapor pressure of Dynalene HT (<0.01 PSIA at 160°C/320°F), along with its low odor and low toxicity, allow for safer use of the product in non-pressurized systems.

Duratherm LT is an engineered for applications requiring process temperatures ranging from -29ºC (-30˚F) to 315ºC (600˚F). Ideal for batch processing requiring heating and cooling cycles. Eliminates the need for heat tracing in outdoor applications.

Duratherm XLT-120 is an engineered for long-term operation in heat transfer applications requiring precise temperature control ranging from -84°C (-120°F) up to 65°C (150°F). Ideal for cryogenic applications Duratherm XLT-120’s ecomomical cost and wide operating temperature also makes it well-suited for heating and cooling applications found in the food processing, pharmaceutical and chemical industries.

Duratherm 450FG is a rated for use up to 232ºC (450ºF) and ideal for applications such as blow molding, injection molding or any application where lower working temperatures are required or for applications requiring both heating and cooling cycles between between -25°C and 232°C (-12°F and 450°F). Duratherm 450FG meets USDA requirements for incidental food contact, is NSF registered HT1, and meets the requirements of 21CFR1783570.

Duratherm XLT-50 is an engineered for long term operation in heat transfer applications requiring precise temperature control ranging from -45°C (-50°F) up to 121°C (250°F). Duratherm XLT-50’s economic cost and wide operating temperature also makes it well suited for heating and cooling applications found in the food processing, pharmaceutical and chemical industries etc.

Dynalene LO-170 (Low Odor, Low Temperature Heat Transfer Fluid) heat transfer fluid provides nontoxic, thermally effective and affordable alternative to the expensive silicone oils or aromatic hydrocarbons. Dynalene LO-170 also exhibits no odor and high flash point characteristics to accommodate most open bath or closed loop heat transfer systems when used within its recommended temperature range. When operator safety, environmental impact and price are a minimum requirement for your next heat transfer application or retrofit, consider Dynalene LO-170.

Duratherm HF-FG is an engineered specifically to satisfy the needs of industry and insurance officials who recommend operating systems at temperatures below the heat transfer fluid’s flash point. Duratherm HF-FG has one of the industry’s highest flash points at 276˚C (530˚F) and meets USDA requirements for incidental food contact, is NSF registered HT1, and meets the requirements of 21CFR1783570.

Duratherm HTO is an engineered for precise and efficient temperature control up to 315°C (600°F) and is a budget solution where heat transfer applications require an environmentally friendly, low cost fluid to meet today’s fast paced production demands.

Duratherm 630 is a high performance, efficient and environmentally friendly thermal fluid engineered for applications requiring high temperature stability to 332ºC (630˚F). Offering precise temperature control it’s a great alternative to aromatic/synthetic fluids, at a fraction of the cost. It is ideal for a wide range of applications including, high temperature batch processing, chemical reactions, pharmaceutical and resin manufacturing among others.

Armite Lubricants SAE-AMS-2518 contains graphite which may promote corrosion of aluminum, magnesium,ferrous, zinc, and cadmium alloys or plated coatings. It should not be used with such metals. This compound has been used as an anti-seize compound on aircraft engine spark plugs and threaded fasteners and fittings, but its usage is not limited to these applications. This compound may be used safely in contact with austenitic corrosion-resistant steels, titanium, nickel, and cobalt alloys, and similar corrosionresistant metals and alloys.

Aztec Oils Limited MOULD RELEASE CC 24 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.

Duratherm HTO-FG is a rated for use up to 315°C (600°F) it’s engineered and manufactured to comply with the demands of food grade applications ranging from food processing and packaging to pharmaceutical and more.

Duratherm 600 is an oxidative and thermally stable heat transfer fluid (thermal oil) rated to 315˚C (600˚F). Long lasting and environmentally friendly it offers precise temperature control at an economical cost.

Duratherm FG is a rated for use up to 327°C (620°F) it’s engineered and manufactured to comply with the demands of food grade applications ranging from food processing and packaging to pharmaceutical and more.

Duratherm HF is an engineered specifically to satisfy the needs of industry and insurance officials who recommend operating systems at temperatures below the heat transfer fluid’s flash point. Duratherm HF has one of the industry’s highest flash points at 276˚C (530˚F).

Aztec Oils Limited MOULD RELEASE CC 80 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.

SPRAY SHIELD™ is the ultimate multi-purpose lubricant that also penetrates metal surfaces while maintaining highest qualities in corrosive and extreme humidity environments. SPRAY SHIELD™ penetrates into remote areas and delivers long-lasting lubrication in many different applications. SPRAY SHIELD™ works quickly to provide excellent protection and long-lasting lubrication.

Aztec Oils Limited MOULD RELEASE CC 40 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.