Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Extrudate Properties
| Value | Units | Test Method / Conditions | |
| Bulk Density | 675 | g/l | - |
| Extrusion Pressure | 12.5 - 80 *(but preferably 17 - 35) | Mpa | - |
| Mean Particle Size | 500 | microns | - |
| Value | Units | Test Method / Conditions | |
| Diametral Shrinkage | 4.4 | % | - |
| Die Tube Diameter | 23 | mm | - |
| Elongation (at Break) | 12 - 12.5 | % | ISO 13000-2: 1997 (E) |
| Extrusion Pressure | 31.5 | MPa / kgf/cm² | - |
| Extrusion Rate | 320 | (m/h) / (kg/h) | - |
| Heated Length | 1700 | mm | - |
| Heated Length / Diameter Ratio | 74:1 | - | - |
| Powder Charge Weight | 15 | g | - |
| Ram Dwell Time | 1 | s | - |
| Relative Density | 19 / 195 | - | - |
| Temperature Profile | 350/400/400/350 | ºC | - |
| Total Cycle Time | 11.2 | s | - |
| Ultimate Tensile Strength | 3.9 | MPa / kgf/cm² | ISO 13000-2: 1997 (E) |
Packaging & Availability
- Packaging Type
- Packaging
G201C is packed in cardboard boxes with two polyethylene liners. Each box contains 25 kg of G201C.
Storage & Handling
- Disposal
Waste polymer should be disposed of by landfill in accordance with any local regulations for the disposal of products of low toxicity or may be incinerated under approved controlled conditions.