Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Characteristics
- Moderate set speed
- Good heat resistance
- Low minimum use temperature
- Long storage life
- Meets ASTM
- D 4317-86 Type III specification
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Directions
- Use only on freshly machined wood
- Assure all surfaces to be glued are clean and dry
- Joints should be true and pieces to be glued should be in intimate contact
- Spread a thin consistent layer (6-9 wet mil) of adhesive on one surface and bring pieces together under pressure
- Open assembly time is 5 minutes, but is dependent on porosity of the substrates, ambient temperature and quantity applied
- Closed assembly time is 8-12 minutes. Adhesive should be wet when the assembly is placed in the press equipment
- Clamp time for cold pressing is about 20-30 minutes. Allow to cure 24 hours before machining
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Freeze Thaw Stable | Yes | - | - |
| Min Use Temperature | 53.0 | ºF | - |
| Solids | approx. 56 | % | - |
| Specific Gravity | approx. 1.09 | - | - |
| Viscosity | 5000.0 | cps | - |
Packaging & Availability
- Sizes
- 1 gallon
- 5 gallon
- 55 gallon
Storage & Handling
- Shelf Life
12+ months
- Clean Up and Storage
- Cleans up easily with warm water while wet.
- Store tightly closed at room temperature.