Hallman Lindsay Floorguard 309 Premium 100% Acrylic Floor Enamel

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features: Abrasion Resistant,
Detergent Resistant,
Good Weather Stability,
Low Odor,
Matte Finish,
Oil Resistant,
Stain Resistant,
Water-based,
Wear Resistant
Product Highlights: Floorguard is formulated easy application and maintenance in areas with light to moderate traffic. It is ideal for interior and exterior masonry floors, patios, sidewalks, basement floors, and other surfaces.
Features: Stain-Resistant Finish

Easy Maintenance

Multi-Surface Application

100% Acrylic Formula
Benefits: Stain Resistant Finish - The matte finish minimizes signs of wear and resists scuffing, washing, oils, and weather exposure.

Multi-surface Application - Can be applied to a variety of prepared surfaces. Apply the same product on floors, stairs, stringers and girders.

Easy Maintenance - Single-component formulation allows for fast, easy maintenance while reducing time spent on surface preparation. Low odor minimizes impact in occupied spaces.

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Flooring & Surfaces
Floor Coatings
Application Area: Floor,
Patios
Application Method: Brush,
Roller,
Spray
Compatible Substrates & Surfaces: Brick,
Masonry,
Wood
Applications: Drying Time at 77°F 50% R.H:

To Touch: 2 hours*

Recoat: Overnight*

*Cooler temperatures and higher relative humidity will extend dry times

Recommended Spreading Rate:

400 sq. ft./Gal to achieve

4.0 mils Wet Film Thickness

1.2 mils Dry Film Thickness
Equipment Requirements: Roller: 3/8”- 3/4 “ nap synthetic shed-resistant or mohair cover

Brush: 100% nylon or synthetic blend

Airless: Minimum ¾ GPM with .017” tip @ 2300-2700 PSI

HVLP: Twin-stage turbine, 5 – 8 PSI, .051 to .070 projector set
Priming Recommendations: New Work - Interior

Wood Surfaces: Enamel Undercoat, 231.

Smooth Masonry/Brick: Grip-Crete Masonry/Plaster Primer, 166.

New Work - Exterior

Wood Surfaces: Prime Kote, 111 for Cedar and Redwood. All other species Prime Guard, 112.

Smooth Masonry/Brick: Grip-Crete Masonry/Plaster Primer, 166.

Repaint Work: Spot prime all bare areas with suitable primer.

Properties