Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Scott Bader
All Scott Bader
Search products
Matching Product Categories
Composite Materials
Markets
Labeling Claims
Physical Form
Regional Availability
All Filters
17 Products found on Scott Bader
Most Viewed
TDS
With TDS
Crestapol® 1260 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Resin Transfer Molding (RTM), Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1260 Urethane Acrylate Resin is a low-viscosity urethane acrylate type resin. It is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature. This product can be infused at vacuum levels down to -1.0 bar. It produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.
Crystic® Polyester Resin 272E
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters, Isophthalics
Color:
Yellow
Processing Methods:
Filament Winding, Hand Lay-up, Pultrusion, Centrifugal Casting
Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.
Crestapol® 1261 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Resin Transfer Molding (RTM), Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.
Crestapol® 1214 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1214 Urethane Acrylate Resin is a tough, low-shrink, high-quality, surface-finish urethane acrylate resin for pultrusion. When filled with ATH, it has very high fire, smoke, and toxic fume performances, along with an excellent surface finish. It lacks cracking in the central sections.
Crestapol® 1213A Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Resin Transfer Molding (RTM), Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.
Crestamould® Resin 474PA
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters
Processing Methods:
Pultrusion, Hand Lay-up
End Uses:
Tanks, Pipes
Crestamould® Resin 474PA is a thixotropic, pre-accelerated orthopthalic polyester resin with good heat and chemical resistance properties. This product is suitable for the construction of tanks, pipes, and fume stacks to operate in environments where heat and chemical resistance are both required. A non-thixotropic, non-accelerated version of this resin is available as Crystic® 198.
Crystic® Polyester Resin 272
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics
Color:
Yellow
Processing Methods:
Filament Winding, Hand Lay-up, Pultrusion
Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.
Crestapol® 1216 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Hand Lay-up, Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1216 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure. This product can be highly filled to achieve a high level of fire and smoke performance (ASTM E84 Class 1). It is designed for use in hand lamination applications.
Crestapol® 1250 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.
Crystic® Polyester Resin 491PAT
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Unsaturated Polyester (UPE)
Color:
Purple
Processing Methods:
Spray Lay-up, Pultrusion
Crystic® Polyester Resin 491PAT is a versatile, pre-accelerated, unsaturated polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. This product is thixotropic and can be applied with either brush or spray equipment. It may also be used in the pultrusion process for the production of profile sections. This product is suitable for the fabrication of high-performance boat hulls destined for use in warm and tropical waters.
espol™ 26.00
Polymer Name:
Polyester (unspecified)
Reinforcement Material:
Glass Fibers
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Spray Lay-up, Pultrusion, Casting, Hand Lay-up, Continuous Lamination
End Uses:
Ladders, Angles, Channels, Home Appliances
espol™ 26.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a pultrusion grade, providing fast line speeds for products requiring high temperature exposure and a good finish. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials. Typical applications include channels, angles, ladders, and special panels for appliances.
Crestapol® 1211A Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Resin Transfer Molding (RTM), Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1211A Urethane Acrylate Resin is a partially accelerated, filled, tough urethane acrylate resin designed for applications requiring the highest levels of fire and smoke performance. It incorporates a selected grade of alumina trihydrate (ATH), which makes it suitable for the production of laminates where excellent fire resistance and low levels of smoke and toxic fumes are required. This product is halogen-free and does not contain heavy metals.
Crystic® Polyester Resin 491
Chemical Family:
Polyesters, Isophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Functions:
Surface Finish, Resins, Binders & Matrix Materials
End Uses:
FRP Boats, Tanks, Industrial Containers, Hulls
Features:
Food Contact Acceptable, Chemical Resistant, Water Resistant, Thixotropic, Non-Toxic, Excellent Toughness, Good Toughness
Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.
Crestapol® 1212 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1212 Urethane Acrylate Resin is a tough, low-viscosity, fire-retardant, closed-mold urethane acrylate resin with a rapid cure. When filled with ATH, it has very high fire, smoke, and toxic fume performances, which makes it suitable for demanding applications in the rail market.
Crestapol® 1210 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Resin Transfer Molding (RTM), Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1210 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure that can be highly filled. It is designed for use in closed molding processes. Crestapol® 1210A is a partially pre-accelerated grade that is available. These products are not recommended for open mold applications.
Crystic® Polyester Resin 196E
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters, Orthophthalics
Color:
Yellow
Processing Methods:
Reaction Injection Molding (RIM), Injection Molding, Cold Press Molding, Spray Lay-up, Filament Winding, Hand Lay-up, Pultrusion
Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.
espol™ 38.05
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Spray Lay-up, Pultrusion, Casting, Hand Lay-up
espol™ 38.05 is a non-accelerated, non-thixotropic vinyl ester resin that rapidly wets out reinforcements. It exhibits excellent resistance to a wide range of corrosive chemical environments at room and elevated temperatures. It is specifically designed for pultrusion applications. Due to its high elongation and flexibility, espol™ 38.05 can also be used in tooling and mold making.