products in Construction Adhesives

Atmos Technologies

Vycel U

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

Kraton

SYLVATAC™ RE 98

SYLVATAC RE 98 rosin ester is an economical pentaerythritol ester of tall oil rosin. This rosin ester is a broadly compatible tackifier. This is a versatile product for any application that can tolerate a slightly higher formulation color.

Neville

NEVTAC® 10

NEVTAC® 10 is a low molecular weight, C5 liquid tackifying hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

Kolon Industries

SUKOREZ® SU-525

Kolon Industries SUKOREZ® SU-525 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-525 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Munzing

AGITAN® A203E

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

Kraton

SYLVALITE™ RE 100F

SYLVALITE RE 100F rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100F exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

ADDAPT Chemicals BV

BioWet™ 150R

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

Kraton

SYLVARES™ TR A25L

SYLVARES TR A25L polyterpene resin is a clear, light-colored, low molecular weight resin. This liquid resin may be used as a tackifier in a broad range of adhesive systems or as a modifying resin with other tackifiers to improve adhesion to hard-to-bond surfaces. SYLVARES TR A25L liquid polyterpene can also be used to improve low temperature properties.

Kraton

SYLVARES™ TR B115

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

Kraton

UNI-REZ™ 2218

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kraton

SYLVALITE™ RE 100L

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Kraton

SYLVARES™ 6100

SYLVARES 6100 tackifier is a light color, low odor, heat stable aromatic modified terpene resin, which provides an excellent balance of properties when compounded with styrenic block copolymers or ethylene vinyl acetate copolymers.

Kraton

UNI-REZ™ 2215

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Neville

NEVPENE® 9545

NEVPENE® 9545 is a low molecular weight, C5 modified C9 liquid hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

Kolon Industries

HIKOREZ® A-1100

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

Kraton

SYLVALITE™ 9000

SYLVALITE 9000 resin is a biobased tackifier that combines differentiated adhesion with light color and advanced stability.

Kraton

UNI-REZ™ 2521

UNI-REZ 2521 (formerly UNI-REZ 521) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2521 with the alkyd resin at temperatures between 190-210°C. UNI-REZ 2521 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy.

Kraton

UNI-REZ™ 2633

UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

Scott Bader

Texicryl® 13-308

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Chartwell

Chartwell B-515.71W

An amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as an aqueous solution.

Kolon Industries

HIKOREZ® T-3095

Kolon Industries HIKOREZ® T-3095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Altropol Kunststoff

AltroColor PU 5023

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5023 is flame red colored.

Kraton

SYLVATAC™ RE 5S

SYLVATAC RE 5S liquid rosin ester has broad compatibility with polymers used in flooring and construction applications. With an optimized mixture of resins and plasticizers, SYLVATAC RE 5S can be used as a self-emulsifying blend for water-based acrylic polymers.

Munzing

TAFIGEL® PUR 54

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

Munzing

AGITAN® P 803

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

Munzing

METOLAT® P 590

METOLAT® P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration.

Kraton

UNI-REZ™ 138

UNI-REZ 138 polyamide resin is an alcohol soluble type resin of comparatively low viscosity. It has low odor, high gel and water resistance, together with excellent solvent release and blocking resistance. Its high ester tolerance permits addition of small proportions of nitrocellulose without loss of any of these properties.

Valpac

Valpac V-TAC 5951

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

Kraton

SYLVARES™ 540

SYLVARES 540 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. The phenolic component improves compatibility with high polarity polymers. The low Tg of SYLVARES 540 resin improves elasticity at low temperature.

Scott Bader

Texicryl® 13-313

Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Egyptian Carbonate Company (S.A.E.) ECC

MICROCARB NF5

MICROCARB NF5 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Munzing

AGITAN® 305

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Kraton

SYLVARES™ 525

SYLVARES 525 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. This product contains a small amount of phenol modification.

AKE Elastomer

TUFPRENE™ A SBS

Tufprene™ A SBS is the basic grade in the broad range of styrene-butadiene block copolymers from Asahi Kasei. A styrenic thermoplastic elastomer with superior elasticity, styrenic resins compatibility, moldability, adhesive performance, and asphalt blend characteristics. It is supplied in pellet form.

Kraton

SYLVARES™ TR M1115

SYLVARES TR M1115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance. It has a narrower molecular weight distribution, which improves compatibility with some adhesive elastomers.