products in Other Building & Construction Applications

The R.J. Marshall Company

The R.J. Marshall Company A206

A206 is a Ground ATH is used in Pultrusion, BMC.

Sana Minerals

ACCR 112

ACCR 112 is a fine white powder. It is processed from white marble.

Stellarchem

Stellarchem AB760LG TPE Compound

Stellarchem AB760LG TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material.

Hyundai EP

PLASTOMER® 1075B/N

PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.

MPD Industries

MPD Industries UVP 0102 99

UVP 0102 99 is a clear liquid with low viscosity and good solvency.

Kydex

KYDEX® 2200 LT

Kydex® 2200 LT is a cost effective alternative to FRP that offers the additional benefit of weight savings. It meets the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) requirements for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. Additionally, Kydex® 2200LT meets the toxicity criteria defined by SMP800C and BSS7239. A sheet that is SMP800C compliant in the mass transit that requires it.

TrueTime Industrial Corporation

BONTAMIDE 2040

BONTAMIDE 2040 is a non-sagging, thixotropic paste, an adhesive to old and new cement.

Silpak

Silpak RU-448

Silpak RU-448 is a two-component, 100% solids Urethane Elastomer RTV that is easily processed. This system provides semi-flexible, abrasion resistant rubber compound with good elongation for easier demolding. Use for creating molds and rubber parts, especially large molds where dimensional stability is required to avert distortion. Molds are used to cast cement, wax, and plaster parts.

A P Resinas

A P Resinas SAF45

A P Resinas SAF45 is used for formulation of sealants and sealers. SAF45 is Transparent film with a very good balance between hardness and flexibility.

Hyundai EP

PLASMER® 1025BM/NM

PLASMER® 1025BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1025BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Dugdale

Dugdale Plc Intumescent PVC Materials

Dugdale Plc Intumescent PVC Materials incorporate specially treated graphite flakes that add intumescent properties. At a temperature of around 250°C the layers in each graphite flake separate and this increases the volume of the PVC material by approximately 300 percent. In a fire situation, this reaction would typically be triggered by hot smoke.

CTP Advanced Materials

CeTePox® 200 R

CeTePox® 200 R is a unmodified Bisphenol F liquid resin.

Forever Plast

FORLENE® HDPE 8.503

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Hyundai EP

PLASMER® 1045BM/NM

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Silbrico

Sil-cell® 42

Sil-cell® 42 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

Arla Plast A B

MULTICLEAR® STRONG 6 WALL

MULTICLEAR® STRONG 6 WALL is a unique range of extruded multiwall polycarbonate sheets specifically designed to be low U-value product with increased stiffness, allowing cost saving and providing increased light transmittance due to less glazing bars required for installation.

TrueTime Industrial Corporation

BONTAMIDE 2031

BONTAMIDE 2031 is an odorless standard hardener for epoxy resin

Sana Minerals

ACCR T-104

ACCR T-104 is a fine white powder. It is processed from white marble.

TrueTime Industrial Corporation

BONTAMIDE 2080

BONTAMIDE 2080 is a resin which has good adhesive properties, resin mortar.

Hyundai EP

PLASMER® 1055BM/NM

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

RUISIL

RUISIL 1,1,3,3-Tetramethyldisiloxane RJ-TMDS

Ruisil 1,1,3,3-Tetramethyldisiloxane RJ-TMDS is colorless transparent liquid. Soluble in aromatic hydrocarbon, petroleum hydrocarbons and various organic solvent, insoluble in water. with high-active -H.

Black Bear

Black Bear BBC TR30S

Black Bear BBC TR30S is used in the manufacturing of Technical Rubber Goods.

Minera del Santo Angel

Lubricarb® Coated Calcium Carbonate

Lubricarb® Coated Calcium Carbonate is used widely in polymer composites to improve the physical properties, and allow various functionalities and improved workability. At the same time, the cost of the polymer composites can be decreased greatly by replacing the volume of expensive resin with this filler.

Loxim

LOXIAMID PA6 HS1 03001

LOXIAMID PA6 HS1 03001 is an injection molding grade of Polyamide 6 resin.

Stellarchem

Stellarchem AB870LG TPE Compound

Stellarchem AB870LG TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material.

Nylacast

Nylacast Moly

Nylacast Moly is a cast nylon material in which improved crystallization occurs by the addition of Molybdenum Disulphide. On account of this the superficial hardness increases (providing excellent machine ability) and simultaneously the general mechanical and anti-friction properties are improved. Due to the fact that the crystal structure breaks down immediately before the melting temperature is reached, the thermal properties of the material are improved over the basic grade.

Momentive Performance Materials

Momentive Performance Materials TSR117 Silicone

TSR117 Silicone is a Helping deliver heat, chemical and weather resistance to paints, TSR117 silicone can also help provide electrical insulating properties. In fact, insulation varnishes employing TSR117 coating have met class H insulation requirements for electrical devices. TSR117 silicone coating can be cured at high temperature; or, with the help of a catalyst, undergo low-temperature cure and room-temperature drying.

Sana Minerals

ACCR 104

ACCR 104 is a fine white powder. It is processed from white marble.

The R.J. Marshall Company

The R.J. Marshall Company A204

A204 is a Fine Ground ATH is used in Vinyl, SMC, PVC, Pultrusion.

Chemstar

StarBond® 150

StarBond® 150 is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. It is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. StarBond 150 is an excellent product for binding and adhesive applications where economics is important

Forever Plast

FORLENE® HDPE 8.564

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Sana Minerals

ACCR T-120

ACCR T-120 is a fine white powder. It is processed from white marble.

Spolchemie

Spolchemie CHS-EPOXY 517

CHS-EPOXY 517 is a Solvent-free system with high chemical resistance. Solvent-free system, low temperature, wet conditions, very fast hardening. Epoxy resin modified with reactive diluent, flexibilized.

Sana Minerals

ACCR T-130

ACCR T-130 is a fine white powder. It is processed from white marble.

Silbrico

Sil-cell® 50

Sil-cell® 50 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

MPD Industries

MPD Industries UVP 0104 99

UVP 0104 99 is a clear liquid with low viscosity and good solvency.