products in Sealants & Caulks

AB Specialty Silicones

Andisil® 187 Silane

Epoxy functional silane used as a coupling agent for unsaturated polyester-fiberglass composites, and for polysulfide/polyurethane caulks & sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® VS 400

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 500

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Kraton

SYLVALITE™ RE 110L

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

Carpenter Company

CARPOL® GP-6015

CARPOL® GP-6015 (reactive triol) is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an anti-oxidant package tailored for this type of market.

Lion Elastomers

Trilene® 77

Trilene® 77 is is an Ethylene-Propylene-Ethylidene Norbornene Low Molecular Weight Polymer

Kraton

SYLVARES™ 1095

SYLVARES 1095 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This low softening point terpene phenol resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Momentive Performance Materials

Silquest™ A-Link* 15

Silquest™ A-Link 15 silane may be used for use as an endcapper or crosslinker for isocyanate functional prepolymer systems. This product provides improved thermal and UV stability over previous secondary amino silane endcappers. Silquest™ A-Link 15 silane can also be utilized as an adhesion promoter in silicone, hybrid, urethane, and epoxy adhesives and sealants.

Polynt Group

Aquamac® 700

Aquamac® 700 is a high gloss styrene acrylic latex resin optimized to obtain water and corrosion resistance at low film builds. It offers excellent inherent corrosion resistance without the use of additives, which can be further enhanced with the addition of anticorrosive pigments. This latex resin is a formulator friendly, nontoxic waterborne alternative for maintenance, railcar and oem finishes. Manufactured in North America. All components of this product are listed on the DSL.

Carpenter Company

CARPOL® GP-4000

CARPOL® GP-4000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-4000 may also be included as a component in other urethane products and formulations.

Momentive Performance Materials

Silquest™ Y-11699

Silquest™ Y-11699 silanes are secondary aminofunctional bis-silanes. This category of silanes is generally useful to consider for a broad range of applications to promote adhesion in coatings, adhesives and sealants between organic polymers and glass, metal, wood or cast plastic substrates.

Carpenter Company

CARPOL® PGP-3000

CARPOL® PGP-3000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 3000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-3000 may also be included as a component in other urethane products and formulations.

Munzing

METOLAT® P 588

METOLAT® P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration.

Munzing

AGITAN® DF 6686 W

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

Kraton

SYLVARES™ TR M1115

SYLVARES TR M1115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance. It has a narrower molecular weight distribution, which improves compatibility with some adhesive elastomers.

Lion Elastomers

Trilene® CP-80

Trilene® CP-80 is is an Ethylene-Propylene Liquid Copolymer

Kraton

SYLVARES™ 525

SYLVARES 525 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. This product contains a small amount of phenol modification.

Munzing

DEE FO® 1015

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

Huber Engineered Materials

Hubercarb® Q40-200

Hubercarb® Q40-200 is a coarse particle size calcium carbonate produced in Quincy, IL for paints, coatings, adhesives, caulks and sealants applications.

Huber Engineered Materials

Hubercarb® W3NT

Hubercarb® W3NT is a 3-micron calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content enhanced by a propreitary fatty acid based surface treatment.

Carpenter Company

CARPOL® GP-5015

CARPOL® GP-5015 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, Carpol® GP-5015 may also be included as a component in other urethane products and applications.

Lion Elastomers

Lion Elastomers SBR 1012C

Hot polymerized SBR 1012C elastomer is particularly useful as a binder for fibrous materials. It imparts increased cohesive strength when added to an adhesive mixture.

Carpenter Company

CARPOL® GP-3000

CARPOL® GP-3000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-3000 may also be included as a component in other urethane products and formulations.

Munzing

AGITAN® 305

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Huber Engineered Materials

Hymod® M632 SG

Huber Engineered Materials’ Hymod® M632 SG is a fine particle size, surface treated alumina trihydrate commonly known as aluminum hydroxide product that provides flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns. Hymod® M632 SG can be used in such applications as foamed insulation, wire and cable jacketing, TPO roofing membranes, injection molded and extruded polyolefins, compression molded thermosets and solvent borne coatings.

Munzing

AGITAN® DF 681 F

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

Kraton

AQUATAC™ 6025

AQUATAC 6025 resin dispersion is a low softening point rosin ester waterborne tackifier for pressure sensitive adhesives. AQUATAC 6025 can be used with higher softening point waterborne tackifiers to improve low temperature adhesion.

Kraton

AQUATAC™ XR-4343

AQUATAC XR-4343 resin dispersion is a waterborne tackifier combining high solid content with high adhesion performance and stability at high speed. This product is especially designed to be formulated into pressure sensitive adhesives (PSA) where high shear strength is required together with high adhesion.

Kothari Petrochemicals (HC Kothari Group)

KVIS 30

KVIS 30 is the trade name of Kothari’s slightly higher molecular weight polyisobutylene, ranging from 1250 to 1350. KVIS 30 is widely used by our customers as a cling additive in stretch / cling film manufacturing (either incorporated directly into film extrusion or through a PIB masterbatch) and sealants.

Munzing

AGITAN® P 801

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Reichhold

EPOTUF® 38-406

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

DOG Chemie

Deolink® Epoxy TE-100

Deolink Epoxy TE-100 and Deolink Epoxy TM-100 are reactive bonding and coupling agents which are compatible with a large number of resins, like epoxy, acrylic, urethanes etc. Compared with amino silanes, Deolink Epoxy TE-100 and Deolink Epoxy TM-100 will not cause yellowing and can support the shelf life

Scott Bader

Texicryl® 13-023

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.

AB Specialty Silicones

Andisil® VS 5,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® 189 Silane

Mercapto-functional silane used as a coupling agent in polysuflide and polyurethane caulks and sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® VS 200

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.