products in Sealants & Caulks

Munzing

WÜKONIL® HS

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Velsicol

Velsiflex® 342 S

Velsiflex® 342 S is a blend of dipropylene glycol dibenzoate and other benzoate esters. It is a lower moisture / lower hydroxyl plasticizer. It has been widely used in 2K polyurethane systems to reduce cure interface, which also provides better rebound, improved tear strength and reduced swell with solvents. It is also used in many polysulfide sealant applications and has proven to be a very efficient ester from a softening agent perspective.

Kamsons Chemicals

Kamicryl 5010 Thermoplastic Acrylic Resin

Kamicryl 5010 Thermoplastic Acrylic Resin is an Co-polymer of various Acrylic Monomers available in free flowing solids and solution form. These are extensively used in the formulation of Lacquers and speciality coatings.

Huber Engineered Materials

Hubercarb® Q325

Hubercarb® Q325 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows Q325 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 95% makes Q325 ideal for use in oilfield drilling fluids.

Kraton

SYLVARES™ TP 300

SYLVARES TP 300 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This resin can be used in low temperature applications.

Velsicol

Velsiflex® 328

Velsiflex® 328 is a blend of dipropylene glycol and diethylene glycol dibenzoate in an approximately equal ratio. Velsiflex 328 is primarily known for its exceptional performance in polyvinyl acetate adhesives. It displays excellent wet tack, set times and open time performance. It also improves adhesion to acrylic latex caulks and is a high-solvating PVC plastisol.

Munzing

AGITAN® 232

AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.

Munzing

AGITAN® 526

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Munzing

TAFIGEL® PUR 82

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

Munzing

AGITAN® P 833

AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Polynt Group

Aquamac® 740

Aquamac® 740 is a styrene acrylic latex polymer with good block resistance and corrosion resistance when formulated for use in industrial metal primers. This resin has high gloss capability and utility for use in direct-to-metal finishes. It retains performance properties at higher pigment volume concentrations. Manufactured in North America.

Incorez Ltd

Aldirez BH

Aldirez BH is a remarkably versatile solution, facilitating sealing and bonding with just one product. It takes moisture-triggered technology to new heights, by allowing bubble-free curing at high temperatures and humidity, whilst ensuring good in-can stability in these application conditions.

Micronized Products

MicroTalc® SR

MicroTalc® SR is a magnesium silicate mineral with a monoclinic crystal structure. It is characterized by its softness and platy or lamellar physical structure. When ground into a fine powder, this lamellar property gives a smooth, soapy feel.

Munzing

METOLAT® P 854

METOLAT P 854 is recommended for use in dry mixtures which are to be blended or diluted with water prior to application. The use of METOLAT P 854 significantly improves wetting of pigments and extenders.

Kraton

SYLVALITE™ ENDURA 99

SYLVALITE ENDURA 99 rosin ester is an ester of stabilized Tall Oil Rosin. This innovative, light colored product has been formulated to provide excellent resistance to oxidation. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides notably improved color stability as compared to other tackifiers.

Munzing

AGITAN® P 841

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Kraton

SYLVARES™ TP 96

SYLVARES TP 96 resin is a low softening point terpene phenolic resin having broad polymer compatibility. This thermoplastic resin is designed to tackify hot melt and pressure sensitive adhesives providing improved tack, peel and flexibility for EVA, SIS and acrylic based systems. When formulated as a co-resin, this product will significantly improve performance and properties of styrenic block copolymers based adhesives with limited impact on heat resistance.

Kraton

SYLVARES™ 1105

SYLVARES 1105 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This low softening point terpene phenol resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Munzing

AGITAN® E 255

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Kolon Industries

SUKOREZ® SU-100S

Kolon Industries SUKOREZ® SU-100S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). It is also used as a binder for paint for fusion type roads. SUKOREZ® SU-100S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kraton

SYLVARES™ 1115

SYLVARES 1115 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Munzing

AGITAN® 299

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

Altropol Kunststoff

AltroColor PU 5002

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5002 is ultramarine blue colored.

Huber Engineered Materials

Hubergroup HN 100

HN-100 is a halogen–free, very coarse particle size alumina trihydrate product that provides low cost flame retardant and smoke suppression in a variety of applications. It can be filled at very high loadings and has excellent processing characteristics, up to 200°C. HN-100 is recommended for rubber goods, compression molded thermosets, adhesives, latex, vinyl and urethane compounds and carpet backings.

Huber Engineered Materials

MoldX® A400

MoldX® A400 is a third generation optimized Alumina Trihydrate (ATH) product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.MoldX® A400 optimized ATH is particularly well-suited for SMC, and it can also provide low cost flame retardancy and smoke suppression in other thermoset processes such as: epoxy potting, wet-mat, spray-up, hand lay-up, and bulk molding compounds (BMC) that contain reinforcing fibers (patent pending).

Huber Engineered Materials

Hubergroup SB-432

SB-432 ATH developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part.

Momentive Performance Materials

Silquest™ A-137

Silquest™* A-137 silane is a monomeric alkylalkoxysilane that, when exposed to moisture, is reactive with minerals contained in concrete, masonry and other substrates. The monomer can penetrate deeply into a substrate, and then react to form an extremely durable protective surface surrounding each microscopic particle.

Huber Engineered Materials

Hubercarb® G60

Hubercarb® G60 is a medium fine particle size calcium carbonate produced in Marble Hill, GA for paints, coatings, adhesives, caulks and sealants applications.

Huber Engineered Materials

Hubercarb® Q200

Hubercarb® Q200 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. The Q200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

Carpenter Company

CARPOL® EDAP-770

CARPOL® EDAP-770 is an ethylene diamine initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and has a mild catalytic nature. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, Carpol® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

AKE Elastomer

Tuftec™ H1221

Asahi Kasei Tuftec™ H1221 is specially designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1221 ultra-finely dispersed into PP. PP and H1221 blends provide transparent PP sheets and films with excellent flexibility and resistance to hazing or whitening on bending. The excellent adhesion is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1221 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

Munzing

AGITAN® P 840

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Huber Engineered Materials

Geotex® FXZ

Geotex® FXZ is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. FXZ can be used as a texturizing agent in coatings, plaster, EIFS, as an abrasive in many applications and as a filler in PVC flooring. The marble crystal structure is useful in recirculation drilling fluids.

CH Polymers

CH Polymers CHP 557

CH Polymers CHP 557 is an Acrylic Polymer containing 60% solid which has high flexibility and is MIT Free.

Altropol Kunststoff

AltroColor EP 2018

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor EP 2018 is oxide black colored.

Altropol Kunststoff

AltroColor PU 5004

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5004 is oxide yellow colored.