products in DIY & Consumer

Synthopol

LIOPUR PFL 2900

Aqueous Aliphatic polyurethane dispersion based on a polyester from renewable raw materials

Fielco Adhesives

Fielco Adhesives FCO 9501

Fielco Adhesives FCO 9501 is a general purpose, flexible, long potlife, two-part epoxy adhesive designed for applications requiring excellent adhesion to metals and plastics.

Synthopol

SYNTHOESTER 1080

Highly branched, saturated polyester containing hydroxyl groups.

Synthopol

SYNTHALAT A-TS 3392

Thermoplastisches high-solid Acrylatharz

Materia Hnos. S.A.C.I.F.

MATER 59 TH

MATER 59 TH is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Glonatech (ONEX Group)

ONEX MW 1001

ONEX MW 1001 provides a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Superior Stone

Superior Stone Fusion Modified Vinyl Ester Adhesive

Fusion Modified Vinyl Ester Adhesive is a blend of Vinyl Ester and Modified Acrylic adhesive technology. It is perfect for seaming, mitering, laminating and chip repair. It can be used with natural stone, engineered stone, sintered, ultra-compact and other dense material. Superior FUSION has enhanced color/clarity excellent for color matching all colors and substrates.

Fielco Adhesives

Fielco Adhesives FCO 9502

Fielco Adhesives FCO 9502 is a flexible, two-part epoxy adhesive with excellent wetting characteristics for applications requiring metal-metal, metal-plastic, or plastic-plastic bonding.

Synthopol

SYNTHALAT A 526 HS

Air drying alkyd-modified Acrylic resin

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-2

Demeter Technologies Aluminum Oxide YL-2 is a high purity rapid cut/good finish aluminum oxide powders for a variety of surface correction formulations.

Synthopol

LIOPUR PFL 2366

Aqueous, Aliphatic modified polyurethane dispersion based on a polyester, Solventfree and triethylaminfree, free of surfactants

Risun Polymer

KERILON® 201S

KERILON® 201S is trimethoxy silane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

Griffon

HBS-200 Tape

HBS-200 Tape is Universal, elastic, instantly water- and airtight tape for (emergency) repairs. Also fo use in combination with HBS-200® Liquid Rubber. .

Risun Polymer

RISUN 12000E

RISUN 12000E is triethoxysilane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

Risun Polymer

RISUN 30000T

RISUN 30000T is trimethoxy silane terminated polyether polymer.

Superior Stone

Superior Stone Gold Modified Acrylic Adhesive

Gold Modified Acrylic Adhesiveis a revolutionary and unique adhesive perfectly suited for use on Natural Stone, Quartz Surface, Solid Surface, Sintered and Ultra-Compact surfaces. Mitering, Seaming, Laminating, Rodding, Filling, Repairing. GOLD is the most versatile adhesive in the stone industry. Superior GOLD provides excellent mechanical & chemical bonding making it ideal for use when stone is being processed with CNC machines. The cured adhesive is tough with a molecular “flex” and can withstand the pressure exerted by CNC machines, absorb expansion/contraction conditions and shock‐loads which is important during transportation of bonded pieces. Superior GOLD has such clarity and translucency, it can be used “as-is” to pick up the natural colors of the stone and it also makes it easy to color with Superior Coloring Paste to match an infinite number of stone colors.

Egyptian Carbonate Company (S.A.E.) ECC

MICROCARB NF2

MICROCARB NF2 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Egyptian Carbonate Company (S.A.E.) ECC

MICROCARB NF1

MICROCARB NF1 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-19

Demeter Technologies Aluminum Oxide YL-19 is a high purity rapid cut/good finish aluminum oxide powders for a variety of surface correction formulations.

Egyptian Carbonate Company (S.A.E.) ECC

MICROCARB NF4

MICROCARB NF4 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Zortrax

Zortrax Z-ABS 2

Z-ABS is a versatile and economic material which perfectly matches the needs of users who begin their work with 3D printing as well as professionals who want to make savings on in-house prototyping. With a wide selection of post-processing methods, either mechanical or chemical, Z-ABS becomes well-suited not only for producing affordable prototypes, but also for creative applications, such as conceptual models, gadgets or figurines. Z-ABS is something you seek for if you need to 3D print low-cost, attractive-looking objects or prototypes with functional requirements.

Euclid Chemical

Dural HS Gel Class A

Dural HS Gel Class A is a two-component, 1:1 mix ratio, a structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be installed from 40°F to 110°F. DURAL HS GEL has been tested by ASTM E488 and ASTM E1512 for its ability to resist static, dynamic, seismic, and wind loads in uncracked concrete for both threaded rod and rebar.

Euclid Chemical

Dural 452 MV

DURAL 452 MV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel.

Puyang Ruicheng Chemical

Puyang Ruicheng Chemical Adhesive resin RC-A1100

Puyang Ruicheng Chemical Adhesive resin RC-A1100 is is a kind of particle yellowish particle, a polymer of low molecular weight which is mainly generated from diolefins of five carbon atoms(such as pentadiene, isoprene etc.) by the polymerization with the action of a certain temperature pressure and catalyst. Mainly used in adhesives and sealing industry. Adhesive resin RC-A1100 as a tackifier resin is more compatible with styrene polymer(such as SIS, SBS, SEBS, SEPS, etc.,), pure rubber, synthetic rubber, EVA and so on. It also owns good compatibility with natural tackifying resin. so that it can improve various performance of tackifier in different degree. Being risen obviously in its promote viscous, sticky and holding, it has been widely used in hot melt adhesives, pressure sensitive adhesives and other industries. Because of its peel strength has improved, adhesion property is more stability, moderate melt viscosity, excellence heat resistance and being primely compatibilized with the polymer matrix.

Materia Hnos. S.A.C.I.F.

MATER 560-1

MATER 560-1 is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Synthopol

SYNTHALAT SR 46

Air-drying medium-oil alkyd resin

Glonatech (ONEX Group)

ONEX MW 1002

ONEX MW 1002 provides a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Superior Stone

Superior Stone Fusion 250ml Tubes Modified Vinyl Ester Adhesive

Fusion 250ml Tubes Modified Vinyl Ester Adhesive is a blend of Premium Vinyl Ester and Premium Modified Acrylic adhesive technology. It is perfect for seaming, mitering, laminating and rodding. It can be used with natural stone, engineered stone, sintered, ultra-compact and other dense material. Superior FUSION 250ml is certified for use with Neolith® sintered stone. Superior FUSION 250ml colors are perfect balance of translucent and opaque coloring for perfect color matching. Superior FUSION 250ml has a smooth no-drip consistency ideal for vertical and horizontal applications.

Kolon Industries

SUKOREZ® SU-110

Kolon Industries SUKOREZ® SU-110 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA).

Fielco Adhesives

Fielco Adhesives FCO 9513

Fielco Adhesives FCO 9513 is a high chemical resistant, long potlife, heat curing, two-part epoxy adhesive providing excellent bond strength to a variety of materials.

Materia Hnos. S.A.C.I.F.

MATER 60 THD

MATER 60 THD is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Superior Stone

Superior Stone V-Max 100% Premium Vinyl Ester Adhesive

V-MAX adhesives are very light / white (pearlescent) in color making them ideal for seaming, mitering, laminating, rodding and chip repair on all types of natural stone, engineered stone, sintered and ultra-compact surfaces. These adhesives are 100% Vinyl Ester stone adhesives formulated with the most exclusive, premium resin available. Providing the strongest bonding of all 100% Vinyl Ester adhesives in the stone industry.

BITEC

PMA-2000™

PMA-2000™ is a cold-applied, trowel-grade mastic with excellent low temperature flexibility designed for use as a patching and leak repair material on asphalt roofing systems. Its high solids content, asphalt, additional fiber rein-forcement and plasticizing oils improve low temperature performance.

Egyptian Carbonate Company (S.A.E.) ECC

MICROCARB NF11

MICROCARB NF11 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Synthopol

LIOCRYL XAM 5134

Aqueous, self-crosslinking pure Acrylic emulsion, solvent- and plasticiser-free

Ferro-Plast

Ferrostab® PP UV 66-40

Ferrostab® PP UV 66-40 Is MB UV stabilizer at 40% on PP for fibers, extrusion and molding, UV STABILIZER MASTERBATCH ALTA CONCENTRAZIONE.