Adhesives & Sealants

Mitsubishi Chemical Group

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications.   Features Polymer-type epoxy resin with epoxy functional groups at the both ends High molecular weight High softening points  Good adhesion Applications PCM, CAN and other coatings Paint Thermoplastics  Printed electronics  Plastic processing    *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).BenefitsExcellent adhesivenessMaintains high electrical reliability FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)ApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol   Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption  Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Kuraray

Kuraray Poval™ 49-88

KURARAY POVAL™ 49-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. This grade is water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is used as an adhesive promoter. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ 49-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.

Mitsubishi Chemical Group

jER™ 1256

jERTM 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).   Benefits Excellent adhesiveness Good elastic recovery  Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Low viscosity Applications Electrical and electronic applications  Potting & encapsulation materials Adhesives   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Momentive Performance Materials

CoatOSil™ MP 200 Silane

CoatOSil™ MP 200 silane promotes adhesion in a broad range of applications via multiple epoxy and silane groups on each oligomer chain. Its gamma-gylcidoxy propyl epoxide ring reacts with many organic groups while its alkoxy silane groups promote adhesion to inorganic substrates. Condensation of its silanol groups can also provide crosslinks between polymer chains.

Momentive Performance Materials

Silquest™ A-1100

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

Momentive Performance Materials

Silquest™ A-1387 Silane

Silquest™ A-1387 Silane is a Silicone Release Coating.

Nippon Shokubai

EPOMIN SP-200

EPOMIN SP-200 is the water soluble polymer which is made by polymerization of ethyleneimine. EPOMINE is not a entirely linear polymer but a partly branched polymer containing primary, secondary, and tertiary amine.

Momentive Performance Materials

Silquest™ VS-604

Silquest™ VS-604 silane typically provides excellent performance in the potentially cost-effective production of moisture crosslinkable silylated polyolefin compounds. It is a modified vinyltrimethoxysilane that may be considered for use in the manufacture of pipe, wire and cable and industrial goods.

Nippon Shokubai

EPOMIN™ P-1050

EPOMIN™ P-1050 is the water soluble polymer which is made by polymerization of ethyleneimine. EPOMINE is not a entirely linear polymer but a partly branched polymer containing primary, secondary, and tertiary amine.

Kuraray

Kuraray Poval™ LM-10HD

Kuraray Poval™ LM-10HD by Kuraray is an ultra-low saponified polyvinyl alcohol (PVOH) grade. This grade is water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is used as an adhesive promoter. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ LM-10 HD can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It can be stored for 12 months. Complies with EU Directive 67/548/EC regulation.

Momentive Performance Materials

Silquest™ A-178

Silquest™ A-178 silane is a coupling agent for glass fiber and particulate filler reinforced composites. It is a 100% active methacrylamido functional silane that may be used to promote adhesion between a wide range of resins and substrates and reinforcements. It is also useful as a monomer in the synthesis of organic polymers. It functions as a moisture- activated crosslinking agent.

AB Specialty Silicones

Andisil® 78 Silane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Clariant

Licocene® PE MA 4351 Fine Grain

Licocene® PE MA 4351 Fine Grain is a highly grafted maleic anhydride Polyethylene® wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified Polyethylene® creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene® PE MA 4351 fine grain. Licocene® PE MA 4351 Fine Grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds.

Kuraray

Kuraray Poval™ 22-88

KURARAY POVAL™ 22-88 is a partially hydrolyzed polyvinyl alcohol (PVOH) grade by Kuraray. It exhibits good bonding strength and pigment binding capacity. It offers good cohesion and adhesion to fibers, fillers and pigments. It is designed for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used as an adhesive promoter. It can be added to polymer emulsion to extend the open time, increase setting speed and influence the rheology. KURARAY POVAL™ 22-88 is recommended for use in postage stamps and labels.

Momentive Performance Materials

Silquest™ A-187

Silquest™ A-187 silane is specially formulated for use as an adhesion promoter in SPUR + * prepolymer, urethane, epoxy, polysulfide, silicone and acrylic systems for caulks, coatings, sealants and adhesives. Its epoxy functionality allows Silquest™ A-187 silane to perform as a durable epoxy ring that is reactive with many organic functions. It also offers non-yellowing adhesion in many resin systems and has proven to increase the flexibility of systems when compared to other adhesion promoters under certain conditions.

allnex

EBECRYL® 741

EBECRYL® 741 is an adhesion-promoting resin with excellent pigment dispersion properties for radiation curable screen inks.

AB Specialty Silicones

Andisil® OH 50,000

Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Momentive Performance Materials

Silquest™ A-171

Silquest™ A-171 silane offers vinyl and silane functionality and also can be utilized for chain extension of RTV silicones or OH functional polymers. This results in Si-O-Si crosslink sites that are highly resistant to the effects of exposure to moisture, chemicals and UV rays. As a siloxane crosslinker, Silquest™ A-171 silane typically does not generate color and is resistant to acid rain under most conditions. This silane is also useful as a moisture scavenger in moisture cure systems where improved shelf life is desired.

Momentive Performance Materials

Silquest™ A-186

Silquest™ A-186 silane adhesion promoter, can result in better electrical and/or mechanical properties in a variety of applications and industries. From enhancing electronic encapsulants to enabling improved sealant formulations, Silquest™ A-186 silane provides both epoxy and silane functionalities that promote adhesion in a range of formulations, including SPUR+ prepolymer, urethane, epoxy, silicone, and acrylic caulks, coatings, sealants and adhesives.

Mitsubishi Chemical Group

jER™ 1750

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Clariant

Licocene® PP MA 6452 Fine Grain

Licocene® PP MA 6452 Fine Grain is a maleic anhydride grafted polypropylene wax.

AB Specialty Silicones

Andisil® 2120 Silane

Diamino-functional silane that provides superior elongation, flexibility, and spreading at the interface as a coupling agent. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® OH 750

Andisil® OH 750 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Chartwell

Chartwell B-515.71W

An amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as an aqueous solution.

Momentive Performance Materials

Silquest™ A-Link* 35

Silquest™ A-Link 25 silane and Silquest™ A-Link 35 silane are unique isocyanate functional silanes. The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most active hydrogen containing compounds. The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates.

Momentive Performance Materials

Silquest™ A-1120

Silquest™ A-1120N(beta-aminoethyl) gamma-aminopropyltrimethoxy-silane is diamino func tional silanes that may be used over a broad range of applications. They are used to promote the adhesion of amino-reactive resins such as silicone, silylated polyurethane, two-part urethanes and two-part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers or reinforcements.

Momentive Performance Materials

Silquest™ VX-225

Silquest™ VX-225 silane is an amino-functional oligosiloxane adhesion promoter that may be considered for use over a broad range of adhesives and sealants applications.

Momentive Performance Materials

Silquest™ VS-142

Silquest™ VS 142 Silane is a high purity, amino-alkyl-silane solution in water, and as such provides the performance of aminoalkylsilane esters such as Silquest™* A-1100 Silane, in a convenient prehydrolyzed form. Silquest™ VS 142 silane can be easily diluted with water and does not contain alcohol. and Resilency.

AB Specialty Silicones

Andisil® 6041 Silane

Glycidoxy (epoxy) -functional silane that is used as a coupling agent for unsaturated polyester– fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Clariant

Licocene® PP 1302 Granules

Licocene® PP 1302 Granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity.