Adhesives & Sealants

Huber Engineered Materials

Hubercarb® M3

Hubercarb® M3 is a ultra-fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M3 to be used a wide range of applications including paints, coatings, PVC compounds, caulks, silicone rubbers, plastics, and drilling fluids.

Munzing

METOLAT® P 590

METOLAT P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration.

Munzing

AGITAN® P 803

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

TOR Minerals

BARTEX® 65

BARTEX® 65 is a white, barium sulfate extender pigment designed to increase the efficiency of titanium dioxide. BARTEX features controlled particle size, high whiteness and brightness, high specific gravity, and chemical inertness. TOR Minerals International produces different BARTEX grades to meet your specific needs, differentiated by particle size and whiteness. Our chemistry is the highest quality of any producer in the United States.

Thiele Kaolin Company

Thiele Kaolin Company EG-44

Thiele Kaolin Company EG-44 is a filler clay from East Georgia that exhibits superior color compared to other pigments that are too yellow. With its fine particle size and high surface area, EG-44 can be used in paper, adhesives, and other building-type products.

allnex

ADDITOL® AQ-1681

ADDITOL® AQ 1681 is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and waterproofing.

TOR Minerals

HALTEX® 315

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Huber Engineered Materials

Hubercarb® W3NT

Hubercarb® W3NT is a 3-micron calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content enhanced by a propreitary fatty acid based surface treatment.

Munzing

METOLAT® P 588

METOLAT P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration.

Huber Engineered Materials

Hubercarb® Q40-200

Hubercarb® Q40-200 is a coarse particle size calcium carbonate produced in Quincy, IL for paints, coatings, adhesives, caulks and sealants applications.

Munzing

AGITAN® P 801

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Polygroup

PROPOLDER™ FPP4040

PROPOLDER™ FPP4040 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

Polygroup

PROPOLDER™ FPP4010

PROPOLDER™ FPP4010 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

Munzing

METOLAT® P 854

METOLAT P 854 is recommended for use in dry mixtures which are to be blended or diluted with water prior to application. The use of METOLAT P 854 significantly improves wetting of pigments and extenders.

Huber Engineered Materials

Hubercarb® Q325

Hubercarb® Q325 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows Q325 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 95% makes Q325 ideal for use in oilfield drilling fluids.

Huber Engineered Materials

Geotex® 30-50

Geotex® 30-50 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance. The marble crystal structure is useful in recirculation drilling fluids.

Huber Engineered Materials

Hubercarb® G3

Hubercarb® G3 is a high purity, ultra-fine ground calcium carbonate produced from a high brightness marble deposit in Georgia for applications that require high brightness or pure tints. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, PVC pipe, rubber, plastics, and construction building products.

Huber Engineered Materials

Hubercarb® M300

Hubercarb® M300 is an medium-fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M300 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 92% and location make M300 ideal for use in oilfield drilling fluids.

Huber Engineered Materials

Geotex® FXZ

Geotex® FXZ is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. FXZ can be used as a texturizing agent in coatings, plaster, EIFS, as an abrasive in many applications and as a filler in PVC flooring. The marble crystal structure is useful in recirculation drilling fluids.

Huber Engineered Materials

Hubercarb® M200

Hubercarb® M200 is a medium fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. The M200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful

Huber Engineered Materials

Hubercarb® G260

Hubercarb® G260 is a high purity, medium fine ground calcium carbonate produced from a high brightness marble deposit in Georgia. The G260 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

Munzing

METOLAT® P 861

METOLAT P 861 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 861 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.

Huber Engineered Materials

Geotex® 16-40

Geotex® 16-40 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance.

TOR Minerals

HALTEX® 304

HALTEX® 304 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Huber Engineered Materials

Hubercarb® Q200

Hubercarb® Q200 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. The Q200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

Munzing

AGITAN® P 840

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Micronized Products

MicroTalc® SR

MicroTalc® SR is a magnesium silicate mineral with a monoclinic crystal structure. It is characterised by its softness and platy or lamellar physical structure. When ground into a fine powder, this lamellar property gives a smooth, soapy feel.

Neville

CUMAR® P-10

CUMAR P-10 is a low molecular weight, liquid hydrocarbon tackifying resin produced by cata-lytic polymerization of predominantly indene and other aromatic monomers.

Munzing

AGITAN® P 833

AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Huber Engineered Materials

Hubercarb® M4

Hubercarb® M4 is a fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M4 to be used in a wide range of applications including paints, coatings, PVC compounds, caulks, silicone rubbers, and plastics.

TOR Minerals

HALTEX® 310

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Munzing

AGITAN® P 841

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Hoffmann Mineral

AKTISIL PF 216

AKTISIL PF 216 is a SILLITIN Z 86 coated with tetrasulfane silane.

Arctic Minerals

ThermaFlex HR4(S)

ThermaFlex HR4(S) maintains superior delamination while providing an excellent balance of properties. Because their high purity, these micas maintain low abrasivity with elasticity and minimum attrition when exposed to the extreme mixing conditions of compounding and extrusion.

Huber Engineered Materials

Hubercarb® G60

Hubercarb® G60 is a medium fine particle size calcium carbonate produced in Marble Hill, GA for paints, coatings, adhesives, caulks and sealants applications.

Arctic Minerals

BriteFlex® MR2 (S)

BriteFlex® MR2 (S) maintains a high aspect ratio of potassium aluminum silicate which exhibits superior brightness and purity.