Adhesives & Sealants

Munzing

AGITAN® 109

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

Munzing

AGITAN® 282

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

Munzing

AGITAN® DF 6420

AGITAN DF 6420 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily disperses in most organic solvents.

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Munzing

AGITAN® A203E

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

Munzing

AGITAN® 120

AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

Munzing

AGITAN® 350

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

IGM Resins

Omnirad 2100

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

Munzing

AGITAN® 701

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.

Munzing

AGITAN® 731

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

Munzing

AGITAN® 155

AGITAN 155 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 155 is resistant to alkaline environment. It can be used between pH 6 and 11.

Munzing

AGITAN® 156

AGITAN 156 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 156 can be used in pigmented and non-pigmented water based systems. AGITAN 156 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.

Munzing

AGITAN® 305

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Munzing

AGITAN® 295

AGITAN 295 is a surface active product formulated for middle viscous, finely dispersed pigmented coatings. Existing foam will be destroyed. Re-creation of foam will be avoided. Furthermore AGITAN 295 is also recommended for treatment of different types of polyvinylalcohol - solutions.

Munzing

AGITAN® 265

AGITAN 265 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems, where only low emmisions are allowed. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 265 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

Munzing

AGITAN® 105

AGITAN 105 is a special formulated emulsion type defoamer with excellent stability and defoaming properties. The defoamer is easy to emulsify in aqueous systems.

IGM Resins

Omnirad 4265

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

Graf Chemicals GmbH

SILWA® TL 100

SILWA® TL 100 is water-free formulation of silicones, waxes and additives with antistatic properties.

ichemco

Antiox AHM

ANTIOX AHM is a synergistic blend of various antioxidant systems, including primary phenolic stabilizers, thio-esters for the long term stability and phosphites for high temperature protection. Its physical form ensures very low dust formation in handling and good flowing properties. The physical form of the components is primarily (but not completely) dusty in order to facilitate the dissolution / melting of the product.

ADDAPT Chemicals BV

Foamstop™ VF 35N

ADDAPT Foamstop VF 35N is a highly effective Foam Control Agent for low VOCphysical Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of oils with PAG’s and surface active components - MOSH/MOAH free - All constituents comply with the FDA regulation (incidental contact with foodstuff). FDA regulation: #173.340

Munzing

AGITAN® 352

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

Munzing

AGITAN® 232

AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.

Munzing

AGITAN® 315

AGITAN 315 is recommended for aqueous emulsion systems specifically for low odor formulations, architectural coatings, emulsion plasters, industrial and wood coatings, printing inks, adhesives and cleaners. It is compatible with all common binders.

Munzing

DEE FO® 215

A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.

Graf Chemicals GmbH

SILWA® CMS 100

SILWA® CMS 100 is water-free formulation of high molecular silicones, hydrocarbons and additives.

Graf Chemicals GmbH

SILWA® BOND FIL

SILWA® BOND FIL is water based formulation of different polymers.

Esstech

Esstech PL-4265

PL-4265 is a 50:50 liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide. It provides exceptional cure response in white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. PL-4265 soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

ichemco

Uvistop TRM 1

UVISTOP TRM 1 is a synergistic blend of light stabilizers in powder form.

Deuteron

Deuteron ES 224

Deuteron ES 224 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in re­moving air-bubbles (for instance when mixing resin and curing agent). It improves wetting of the substrate in systems containing extenders.Because of the above mentioned properties Deuteron ES 224 is an excellent wetting and air release agent in particular for laminating resins based on unsaturated polyester. The product is very suitable in laminating resins where excellent adhesion of polyester resin and glass fiber is required. The product is particularly suitable for thixotropic systems since it has no impact on the rheology (thixotropy). back

ichemco

Release ST9 HM Dry

PRINTABLE RELEASE COAT FOR DOUBLE CORONA TREATED POLYOLEPHYNIC HOT-MELT ADHESIVE TAPES RELEASE ST9 HM DRY is a powder compound, based on synthetic resins, easily soluble in solvents (TOLUENE/IPA: 75/25 or HEXANE/IPA : 75/25).

ichemco

Antiox AHM EC

ANTIOX AHM-EC is a synergistic blend of various non-staining antioxidants, including primary phenolic stabilizers, thio-esters for the long term stability and phosphites for high temperature protection. The physical form of the components is primarily (but not completely) dusty in order to facilitate the dissolution / melting of the product.

DuPont

BETALINK® 32 Black

BETALINK® 32 Black is a one component, moisture curing, MS Hybrid Polymer based sealer with permanent elasticity and adhesion to numerous substrates without primer pre-treatment. The material is used for various interior/exterior sealing applications with no odor, medium strength, low volume retraction.

DuPont

BETALINK® 32 White

BETALINK® 32 White is a one component, moisture curing, MS Hybrid Polymer based sealer with permanent elasticity and adhesion to numerous substrates without primer pre-treatment. The material is used for various interior/exterior sealing applications with no odor, medium strength, low volume retraction.

MG Chemicals

MG Chemicals 8337 - Speaker Repair Glue

The 8337 Speaker Service Cement is a flexible, durable, solvent-based, rubber resin adhesive that is designed for speaker repair.

Kerax

Techniwax™ 9705

Partners in Chemicals

OMNISTAB® UV 1130

OMNISTAB® UV 1130 acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a pumpable liquid useful in a variety of substrates and applications.