products in Adhesives & Sealants: Epoxy & Epoxy Derivatives

Resin Technology Group

Oxy-Bond™ 160-EX Two-Component Epoxy Adhesive

Oxy-Bond™ 160-EX Two-Component Epoxy Adhesive has high performance, toughened, general purpose adhesive.

Euclid Chemical

Dural Fast Set Gel

Dural Fast Set Gel is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a quick turnaround. DURAL FAST SET GEL can be used in temperatures as low as 40ºF and rising.

Leuna-Harze GmbH

Epilox® F 16-01

Epilox F 16-01 is a colorless, low-molecular-weight bisphenol F epoxy resin.

Euclid Chemical

Dural Fast Set LV

v is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates. DURAL FAST SET LV can be used in temperatures as low as 40ºF and rising.

ThreeBond Europe SAS

ThreeBond Europe SAS TB3380B

ThreeBond Europe SAS TB3380B has been developed for bonding electrical and electronic parts, which require low outgas. A 2-component epoxy type electroconductive adhesive, it may be cured at room temperature, although curing at an elevated temperature reduces the amount of outgas further.

Entropy Resins

SUPER SAP® CCR/CCF

Super SAP® CCR/CCF is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

Anchor Seal

Anchor Seal SY5300* Amber

Anchor Seal SY5300* Amber is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is honey-like, low health hazard, general purpose electrical adhesive.

DAI Products

EA 501

EA 501 used in fast setting applications. Bonds wide variety of substrates like metals, Ceramics, woods and concrete.

Spolchemie

Spolchemie CHS-EPOXY 498

CHS-EPOXY 498 is a Epoxy resin modified with mono-functional reactive diluent.

Permabond Engineering Adhesives

PERMABOND® ET5393

PERMABOND® ET5393 is a 1:1 mixable epoxy adhesive. It is fully toughened and ideal for structural applications exposed impact and vibration stresses. It is ideal for bonding different materials where differential thermal expansion is anticipated. ET5393 can be used to bond a wide variety of materials including plastics, composites and metals – in particular, stainless steel. Unlike many other epoxies, ET5393 is less affected by low temperatures during cure and exhibits a reliable cure in colder conditions.

Triune Chemicals and Materials

Triune Chemicals and Materials LE-828S

Triune Chemicals and Materials LE-828S is non-crystallize resin which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Glonatech (ONEX Group)

ONEX MB 1000RE

ONEX MB 1000RE provides masterbatches of multi-wall carbon nanotube (MWCNT) in various types of resins (e.g. epoxy, silicone), ONEX-MB 1000RE, in small scale, which can be employed in a variety of applications such as adhesives, marine coatings or resin-based parts.

BJB Enterprises

BJB Enterprises TC-1614-AB

TC-1614 A/B is an unfilled, low viscosity epoxy resin system.It is designed to seal porous to semi-porous substrates developing remarkable strength.TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.

MPD Industries

MPD Industries UVP 0610 99

MPD Industries UVP 0610 99 is a di functional Bisphenol A epoxy acrylate oligomer gel. This product is characterized by its light color and high reactivity. It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

Resin Technology Group

Oxy-Bond™ 1114 Two-Component Epoxy Adhesive

Oxy-Bond™ 1114 Two-Component Epoxy Adhesive has high shock and impact resistance for low stress applications of dissimilar materials.

Ciech

EPIDIAN® 6X90

EPIDIAN® 6X90 is used in anti-corrosive paints.

CTP Original

KemaPox HF 022

KemaPox HF 022 is aliphatic amine curing agent-triethylenetetramine.

Click Bond

Click Bond CB301-50 - CB301 50ml Epoxy Adhesive Cartridge

Click Bond CB301-50 - CB301 50ml Epoxy Adhesive Cartridge is a two-part, room temperature curing, flexible adhesive having a combination of good peel and shear strength. This system has a convenient 2:1 volumetric mix ratio which allows use in side-by-side cartridges with a static mixer. CB301 adhesive replaces welding, riveting, and other mechanical fastening methods and is recommended for bonding Click Bond adhesive-bonded fasteners.

Atom Adhesives

Atom Adhesives AA-DUCT 916

Atom Adhesives AA-DUCT 916 is an electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties.

Normac Adhesive Products

Normac Adhesive Products NP-100

NORMAC NP-100 is a two-component 100% solids epoxy-based concrete primer. Designed with extended working times to maximize surface penetration. Applied to concrete surfaces that are cured for a minimum of 28 days with less than 15% moisture content. Coverage rates will depend on surface roughness and porosity.

Resin Technology Group

Resin Technology Group EN 239-2 Cationic UV Cure Epoxy Adhesive

Resin Technology Group EN 239-2 Cationic UV Cure Epoxy Adhesive is an epoxy-based, medium viscosity, cationic- curable adhesive/sealant. This product is activated by exposure to medium intensity UV radiation resulting in a high strength, chemical resistant, low out-gassing polymer system capable of surviving exposure up to 200°C.

Euclid Chemical

Dural 452 Gel

DURAL 452 GEL is a two-component, 100% solids, DOT non-corrosive, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a non-sag adhesive.

C.L. Smith Industrial Company

C.L. Smith Industrial Company CLS 63

C.L. Smith Industrial Company CLS 63 is a high temperature epoxy tile adhesive.

Beacon Adhesives

Magna-Tac™ M648-T

Magna-Tac™ M648-T is a high-strength, room-temperature-curing, 100%-Reactive, two-component, formulated epoxy adhesive designed for bonding all metals and other rigid materials (such as glass, ceramics, plastics, plastic foams and structural laminates) to themselves and to each other. Fully cured bonds exhibit minimal shrinkage, are electrical insulators and provide excellent resistance to weather, galvanic action and most chemical, acids and alkalis.

Kukdo Chemical

Kukdo Chemical KD-3013

Kukdo Chemical KD-3013 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

Permabond Engineering Adhesives

PERMABOND® MT382

PERMABOND® MT382 two-part, modified epoxy adhesive designed for sealing/bonding and potting applications. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. The product can be cured in different mix ratios depending on the flexibility required in the final cured product. MT382 is self-leveling.

Cotronics

Duralco™ 4461

Duralco™ 4461 has excellent adhesion to metals, plastics, ceramics and glass, high bond strength, low moisture absorption, high temp. stability, low shrinkage and excellent chemical, electrical and radiation resistance.

Anchor Seal

Anchor Seal SY5300V Black

Anchor Seal SY5300V Black is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is used for bonds to pvc wire, cases, connectors, switches and automotive type.

Designer Molecules

Designer Molecules EC-1074

DAI Products

EA 520

EA 520 used as excellent adhesion on variety of metals, glass, ceramics and plastics Superior toughness, flexibility and peel strengths

Ciech

EPIDIAN® 6FD

EPIDIAN® 6FD is used in anti-corrosive paints.

IGM Resins

Photomer 3701

PHOTOMER® 3701 is a tri functional cresol novolac epoxy acrylate diluted in 40% TMPTA. It exhibits of good chemical and heat resistance, high surface hardness and has a high reactivity.

Springfield Industries

Springfield Industries SP-GBRK

Springfield Industries SP-GBRK is a elastomer toughened, heat cured, powderedepoxy binder resin that is now available from SpringfieldIndustries. The benefits of SP-GBRK include increasedflexibility and a reliable heat curing mechanism.

Designer Molecules

Designer Molecules CS-783

Atom Adhesives

Atom Adhesives Wood-Bond (Rigid Staking Compound Epoxy Adhesive)

Atom Adhesives Wood-Bond (Rigid Staking Compound Epoxy Adhesive) is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. Wood-Bond contains a thixotropic agent which impedes thinning out of the material during heat cure when properly mixed and cured.

Anchor Seal

Anchor Seal SY5300VS Amber-Clear

Anchor Seal SY5300VS Amber-Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It bonds to PVC and vinyl and is moisture resistant, low viscosity, extended gel time, PVC cable/wire, switch connectors, signal generating transducers.