products in Adhesives & Sealants: Polyolefins

SCG Chemicals

SCG Chemicals LP1040P

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

Phillips66

Copylene® CH020XK

COPYLENE® CH020XK is a polypropylene homopolymer made with a non-phthalate catalyst. It is designed for BOPP (biaxially oriented polypropylene) film extrusion applications with high crystallinity. It is made with a non-phthalate catalyst.

Cardia Bioplastics

Cardia Biohybrid™ BL-M

Cardia Biohybrid™ BL-M is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is an annually renewable material. A hybrid masterbatch with high content of renewable resources in Polypropylene (PP) for molding rigid products. For applications where the use of renewable resources or sustainability are desired and Biodegradability is not required. Can be used by blending Cardia Biohybrid™ BL-M masterbatch with PP in injection molding and extrusion applications. Cardia Biohybrid™ BL-M is formulated with 66% of annually renewable starch. This versatile material is suitable for a wide range of products manufactured by injection molding, extrusion or blow molding processes. Due its content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. For applications in which biodegradability/compostability is required we recommend the usage of Cardia Compostable B-M or T-BM resin.Application Examples Injection molded products such as cutlery, toothbrushes, combs, shavers, golf-tees, etc. Stakes and pegs Horticultural products such as flower pots, planters and stakes Injection molded caps and closures Sheet extruded products such food trays, tubs, disposable plates, strapping and labels Blow molded bottles and toys Profile extruded products such as candy sticks and disposable drinking straws

Forever Plast

FORLENE® HDPE 1.115

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

BTC Europe GmbH

Oppanol® B 10 SFN

Instant Deal AvailableCarton: 4.70EUR/KG EXW (MOQ: 20KG)Request a Quote to access the deal now. Terms & Conditions for Instant Deals An Instant Deal is a time limited price indication for a selective product. Prices and information displayed for Instant Deals do not constitute a binding offer from BTC but are just an opportunity for the customer to request an offer. The contractual partner responsible for the order processing is the related local BASF Unit in the country of the respective sold-to party. For the DACH region it is the BTC Monheim GmbH. The price is calculated as base price without freight and logistic costs, which are added in a next step depending on quantity and place of delivery. A final price offer needs to be requested with the button "request a quote"; Incoterms are CPT; we do not deliver below the respective MOQ; we do not commit on any volumes - "only as long as stock last"; we only sell and deliver to sold-to and ship-to companies within our RTC core reaions in Furone.

BTC Europe GmbH

Oppanol® B 11 SFN

Oppanol® B 11 SFN is a versatile compound containing polyisobutylene, serving as both a water repellent and a viscosity modifier. Classified within the chemical family of polyisobutylene polymers (PIB) and polyolefins, this product is labeled as stabilizer-free, halal, and kosher.

BTC Europe GmbH

Oppanol® B 15 SFN F

Oppanol® B 15 SFN F is a solid polyisobutylene serving as a viscosity modifier and water repellent. Belonging to the polyisobutylene polymers (PIB) and polyolefins chemical family, it adheres to high standards with stabilizer-free, halal, and kosher labeling claims. The solid form ensures convenient handling and application.

BTC Europe GmbH

Oppanol® B 15 N

Oppanol® B 15 N functions as a water repellent and a viscosity modifier, falling within the polyolefins and polyisobutylene polymers (PIB) chemical families. This product holds labeling claims of being Halal and Kosher, and it is widely used in markets including adhesives and sealants, building and construction, industrial, and printing and packaging.

BTC Europe GmbH

Oppanol® B 10 N

Oppanol® B 10 N is a versatile compound serving as a water repellent and viscosity modifier. Classified within the chemical family of polyolefins and polyisobutylene polymers (PIB), Oppanol® B 10 N is labeled as both Halal and Kosher.

BTC Europe GmbH

Oppanol® B 12 SFN

Instant Deal AvailableCarton: 4.95EUR/KG EXW (MOQ: 20KG)Request a Quote to access the deal now. Terms & Conditions for Instant Deals An Instant Deal is a time limited price indication for a selective product. Prices and information displayed for Instant Deals do not constitute a binding offer from BTC but are just an opportunity for the customer to request an offer. The contractual partner responsible for the order processing is the related local BASF Unit in the country of the respective sold-to party. For the DACH region it is the BTC Monheim GmbH. The price is calculated as base price without freight and logistic costs, which are added in a next step depending on quantity and place of delivery. A final price offer needs to be requested with the button "request a quote"; Incoterms are CPT; we do not deliver below the respective MOQ; we do not commit on any volumes - "only as long as stock last"; we only sell and deliver to sold-to and ship-to companies within our RTC core reaions in Furone.

BTC Europe GmbH

Oppanol® B 15 SFN

Oppanol® B 15 SFN is a solid formulation featuring polyisobutylene as its primary ingredient. This versatile compound serves as a water repellent and viscosity modifier. Classified within the Polyisobutylene Polymers (PIB) and Polyolefins chemical family, Oppanol® B 15 SFN stands out with labeling claims such as stabilizer-free, Halal, and Kosher. In its solid form, this ingredient ensures ease of handling and application.

BTC Europe GmbH

Oppanol® B 13 SFN

Oppanol® B 13 SFN serves as a water repellent and a viscosity modifier, belonging to the polyisobutylene polymers (PIB) and polyolefins chemical families. This product boasts labeling claims such as stabilizer-free, halal, kosher. It caters to various markets, including adhesives and sealants, building and construction, consumer goods, electrical and electronic products, food and nutrition, industrial, and printing and packaging.

BTC Europe GmbH

Oppanol® B 14 SFN

Oppanol® B 14 SFN, a solid compound enriched with polyisobutylene, serves as a water repellent and viscosity modifier. Categorized within the chemical family of polyisobutylene polymers (PIB) and polyolefins, this product is distinguished by being stabilizer-free, halal, and kosher.

AGC Chemicals Americas, Inc.

Fluon® ETFE C-88AXMP

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc.

Fluon® ETFE C-55AXP

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc.

Fluon® ETFE C-88AXP

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc.

Fluon® ETFE C88AXMP-HT

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc.

Fluon® ETFE C-55AP

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

Sanyo Chemical America Incorporated

UMEX 1010

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

Sanyo Chemical America Incorporated

UMEX 110TS

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

Sanyo Chemical America Incorporated

UMEX 5200

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

Sanyo Chemical America Incorporated

UMEX 1001

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

King Industries

DISPARLON® NS-30

DISPARLON® NS-30 is a patented blend of polyolefin with amide in xylene in paste form. This product effectively prevents sagging and settling of solvent-based coatings including those containing anti-corrosive pigments at high concentrations. NS-30 has little effect on viscosity, while still imparting strong anti-sagging/anti-settling properties.

Tasnee

Tasnee PP H3080

Tasnee PP H3080 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 8 g/10min. Tasnee PP H3080 is designed for cast polypropylene (CPP) film, both for metallization and general purpose applications with excellent processability characteristics. Cast film produced by Tasnee PP H3080 offers excellent transparency, gloss and high stiffness.

Integument Technologies, Inc.

FluoroGrip® F (HD-FEP) Teflon®

FluoroGrip® F (HD-FEP) Teflon® is made from high molecular weight resin for applications where chemical resistance, high flex life and stress-crack-resistant performance are required.

Polygroup

PROPOLDER™ FPP4060

PROPOLDER™ FPP4060 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

Shamrock Technologies Inc.

Shamrock Technologies Inc. S-368-N5T

S-368-N5T is a stable water dispersible grade of synthetic wax showing melting peaks ranging from 93 – 106°C. S-368 N5T imparts lubricity, abrasion resistance and anti-blocking properties to aqueous-based systems. It also has been used successfully in laminating adhesives to improve die-cutting performance.

Plitek

Plitek 8069 2 mil LDPE Film on a Removable Protective Film Tape

Tasnee

Tasnee LDPE 1925F

Tasnee LD 1925F is a Low Density Polyethylene with a Melt Flow Rate of 2.0 g/10min (190°C/2.16 kg). Tasnee LD 1925F is mainly recommended for crosslinked and non-crosslinked foam applications. It designed to provide uniform cell distribution during LDPE foam extrusion process. Special additive package is used to control the foam cell structure so that uniform cell size and distribution occurred during foam extrusion process. It has a suitable molecular structure and special additive package for providing control and uniform foam cell structure and excellent mechanical properties to the foam. Tasnee LD 1925F can be easily processed on all types of LDPE foam extrusion equipment. The melt temperature is recommended to be in the range of 160 - 200°C.

Sipchem

Sipchem Sahara H 034 EM

SAHARA H 034EM is a polypropylene homopolymer used for extrusion and thermoforming applications. This product is formulated with a low water-carry-over additive package.

Polygroup

PROPOLDER™ FPP4020

PROPOLDER™ FPP4020 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

SACO AEI Polymers

CAPXIDAN® LG

CAPXIDAN® LG is a modified copolymer produced with a proprietary, patent pending formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deckboards to provide moisture, stain and wear resistance, esthetics, low gloss, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® LG is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

Advanced Polymer, Inc

AdvaBond® 7411

AdvaBond ® 7411 is a chlorine-free low molecular weight anhydrous amine-modified polyolefin. Adva-Bond® 7411 is an effective adhesion promoter to low surface energy substrates, between different types of plastics which normally would separate and between plastics and polar substrates.

SACO AEI Polymers

CAPXIDAN® HD

CAPXIDAN® HD is a Modified Copolymer produced with a proprietary, specialized formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deck boards to provide moisture, stain, wear resistance,esthetics, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® HD is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

Tasnee

Tasnee PP H3030

Tasnee PP H3030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3.0 g/10min. Tasnee PP H3030 is designed for Bi-axial Oriented Polypropylene (BOPP) film applications, offering excellent transparency and gloss, high stiffness and excellent processability. Tasnee PP H3030 is formulated to be used for both general purpose and metallized films.

Tasnee

Tasnee PP H3030T

Tasnee PP H3030T is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3.0 g/10min. Tasnee PP H3030T is designed for Bi-axial Oriented Polypropylene (BOPP) film applications, offering excellent transparency and gloss, high stiffness and excellent processability. Tasnee PP H3030T is designed for High Speed Bi-axial Oriented Polypropylene (BOPP) film lines. Tasnee PP H3030T is formulated to be used for both general purpose and metallized films.