products in Adhesives & Sealants: Polyolefins

PETROKEN (Petroquimica Ensenada S.A.)

PETROKEN (Petroquimica Ensenada S.A.) 1102 L

Soredi

NIPLENE T20 FR V0

NIPLENE T20 FR V0 contains characteristics called Homopolymer.

Soredi

NIPLENE T30

NIPLENE T30 contains characteristics called Homopolymer.

Ras Lanuf Oil & Gas Processing Company

Ras Lanuf Oil & Gas Processing Company LLF-181H

Ras Lanuf Oil & Gas Processing Company LLF-181H is a low density polyethylene which is used in food packaging tapes and tapes for agricultural purposes.

Petkim

Petkim PETOPLEN MH180

PETOPLEN MH180 is a homopolymer polypropylene resin with medium molecular weight distribution developed for raffia applications.

Polyplastics Group

Topas® 9903D-10

Polyplastics Group Topas® 9903D-10 is a very low glass transition temperature (T g =33°C) film extrusion grade. It is designed to deliver high shrinkage at low temperatures in shrink packaging applications. It is a moderate clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and general purpose applications. It is used in blends in monolayer products, and alone or in blends in multilayer films. It can be used in both cast and blown film processes. The leading film applications are shrink films and labels. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended. Due to the low glass transition temperature of this grade, shipment and storage of pellets at room temperature or below is strongly recommended.

Soredi

NIPLENE F40 AGR

NIPLENE F40 AGR contains characteristics called Chemically Coupled Reinforcement, Homopolymer.

Forever Plast

FORLENE® HDPE 8.503

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

SCG Chemicals

SCG Chemicals LP1024P

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

Regal Petrochemical

Regal Petrochemical RG 1102 XK

RG 1102 XK is a Polypropylene Homopolymer With Low Water Carry Over and Preferred Grade for Tapes. It is used in Raffia, Tape Yarn, Technical Textiles, Carpet Backing, Diary Products

Hyundai EP

PLASMER® 1025BM/NM

PLASMER® 1025BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1025BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Nippon Paper Industries

AUROREN® 150

AUROREN® 150 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 150 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 150.

Kolon Industries

HIKOTACK® P-120H

Kolon Industries HIKOTACK® P-120H is a pale yellow thermoplastic resin obtained from the copolymerization of aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers good solubility with various solvents and excellent compatibility with various polymers, and is mainly used as an additive for paint, ink and tackifier resin for Ethylene Vinyl Acetate (EVA) type hot melt adhesive (HMA). .

Adiplast

Adiplast Wax AD - 70

Adiplast Wax AD - 70 is polyethylene wax used in adhesive manufacturing.

Nippon Paper Industries

AUROREN® 100

AUROREN® 100 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 100 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 100.

FengShun DongRay Fine Chemical

DONGRAY® OPE WAX 620A

DONGRAY® OPE WAX 620A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Petkim

Petkim PETOPLEN MH318

PETOPLEN MH318 is a homopolymer polypropylene resin with medium molecular weight distribution. Thematerial is developed for monofilament production applications.

Kolon Industries

HIKOTACK® P-150

Kolon Industries HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Ras Lanuf Oil & Gas Processing Company

Ras Lanuf Oil & Gas Processing Company LLF-183N

Ras Lanuf Oil & Gas Processing Company LLF-183N is a low density polyethylene which is used in casting tapes and uses where good mechanical properties.

Alpha Wax

TRECORA POLYETHYLENE WAX – CHU561

TRECORA POLYETHYLENE WAX – CHU561 is a High Density Polyethylene Wax suitable for use in general purpose Hot melt adhesives to reduce viscosity and control open and set time. It can be used in applications where penetration is not of paramount importance.

Itochu Plastics

Itochu Plastics PHF4000R

PHF4000R is a polypropylene homopolymer designed for raffia application. Its unique formulation provides excellent low water carryover.

Soredi

NIPLENE F50 AGR

NIPLENE F50 AGR contains characteristics called Chemically Coupled Reinforcement, Homopolymer.

Forever Plast

FORLENE® HDPE 8.564

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Itochu Plastics

Itochu Plastics PHS3600R

PHS3600R is general purpose injection molding, low water carryover polypropylene homopolymer.

Alpha Wax

TRECORA POLYETHYLENE WAX – CWP500 E

TRECORA POLYETHYLENE WAX – CWP500 E is a High Density Polyethylene Wax intended for use in hot melt adhesive applications to reduce viscosity and control open and set times.

Firestone Building Products

UltraPly™ TPO Flex Adhered

UltraPly™ TPO Flex Adhered is a flexible Thermoplastic Polyolefin roofing membrane produced with polyester weft-inserted reinforcement designed specifically for adhered installations. UltraPly TPO Flex Adhered membrane meets or exceeds all requirements for ASTM D 6878 Specification. This reflective, heat weldable TPO membrane is available in 60 mil (1.52 mm) thickness and is suitable for a variety of low-slope adhered roofing applications.

SCG Chemicals

SCG Chemicals WD2020P

SCG Chemicals WD2020P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Alpha Wax

TRECORA POLYETHYLENE WAX – CHU610

TRECORA POLYETHYLENE WAX – CHU610 is a High Density Polyethylene Wax. It is used in applications where a higher viscosity is desirable. Compared to other low density polyethylene waxes, the viscosity of Trecor CHU610 is still relatively low.

Hyundai EP

PLASMER® 1045BM/NM

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Korea Petrochemicals

YUHWA HIDEN E308T

HDPE product for stretched tape are divided into product for mono-filament, flat yarn and wool pack. YUHWA HIDEN E308T product can be handled under various processing conditions due to high tenacity and good tensile properties and can be used for fishing nets, ropes, shade nets, wool bags and stretched tapes. This product have good chemical resistance, electric properties, weatherability and flexibility as a product with the good processability.

Kolon Industries

HIKOTACK® P-110S

Kolon Industries HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Hyundai EP

PLASTOMER® 1075B/N

PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.

Safripol

Safron® H713 - 06

Safron® H713 - 06 polypropylene resin is developed for the production of slit film tapes where high extrusion speeds are required. It offers excellent processability and low water carry over. Safron® H713-06 is also suitable for general purpose injection molding applications.

FengShun DongRay Fine Chemical

DONGRAY® PE WAX 200A

DONGRAY® PE WAX 200A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Melitek A/S

Flint Hills Resources® P4G2Z-026

P4G2Z-026 is a Homopolymer uses Injection Molding method for processing. It is produced with Phthalate free Catalyst Systems.

Soredi

NIPLENE T10

NIPLENE T10 contains characteristics called Homopolymer.