products in Adhesives & Sealants: Polyolefins

Firestone Building Products

UltraPly™ TPO Flex Adhered

UltraPly™ TPO Flex Adhered is a flexible Thermoplastic Polyolefin roofing membrane produced with polyester weft-inserted reinforcement designed specifically for adhered installations. UltraPly TPO Flex Adhered membrane meets or exceeds all requirements for ASTM D 6878 Specification. This reflective, heat weldable TPO membrane is available in 60 mil (1.52 mm) thickness and is suitable for a variety of low-slope adhered roofing applications.

Alpha Wax

TRECORA POLYETHYLENE WAX – CWP500 E

TRECORA POLYETHYLENE WAX – CWP500 E is a High Density Polyethylene Wax intended for use in hot melt adhesive applications to reduce viscosity and control open and set times.

Itochu Plastics

Itochu Plastics PHS3600R

PHS3600R is general purpose injection molding, low water carryover polypropylene homopolymer.

Korea Petrochemicals

YUHWA HIDEN E308T

HDPE product for stretched tape are divided into product for mono-filament, flat yarn and wool pack. YUHWA HIDEN E308T product can be handled under various processing conditions due to high tenacity and good tensile properties and can be used for fishing nets, ropes, shade nets, wool bags and stretched tapes. This product have good chemical resistance, electric properties, weatherability and flexibility as a product with the good processability.

Soredi

NIPLENE T30

NIPLENE T30 contains characteristics called Homopolymer.

Alpha Wax

TRECORA POLYETHYLENE WAX – CHU610

TRECORA POLYETHYLENE WAX – CHU610 is a High Density Polyethylene Wax. It is used in applications where a higher viscosity is desirable. Compared to other low density polyethylene waxes, the viscosity of Trecor CHU610 is still relatively low.

Marcus Oil and Chemical

Marcus Oil and Chemical M300

Marcus Oil and Chemical M300 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Nippon Paper Industries

AUROREN® 100

AUROREN® 100 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 100 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 100.

Haldia Petrochemicals

Haldia Petrochemicals 71601W

71601W is a LLDPE blown film grade produced by the Spherilene Technology with controlled morphology, excellent processability & mechanical properties This grade can be used in General Purpose Adhesive Lamination film 71601W is without slip or antiblocking additives

Safripol

Safron® H713 - 06

Safron® H713 - 06 polypropylene resin is developed for the production of slit film tapes where high extrusion speeds are required. It offers excellent processability and low water carry over. Safron® H713-06 is also suitable for general purpose injection molding applications.

Melitek A/S

Flint Hills Resources® P4G2Z-026

P4G2Z-026 is a Homopolymer uses Injection Molding method for processing. It is produced with Phthalate free Catalyst Systems.

FengShun DongRay Fine Chemical

DONGRAY® PE WAX 200A

DONGRAY® PE WAX 200A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Soredi

NIPLENE F40 AGR

NIPLENE F40 AGR contains characteristics called Chemically Coupled Reinforcement, Homopolymer.

Adiplast

Adiplast Wax AD - 20

Adiplast Wax AD - 20 is polyethylene wax used in adhesive manufacturing.

Soredi

NIPLENE T10

NIPLENE T10 contains characteristics called Homopolymer.

Polyplastics Group

Topas® 9903D-10

Polyplastics Group Topas® 9903D-10 is a very low glass transition temperature (T g =33°C) film extrusion grade. It is designed to deliver high shrinkage at low temperatures in shrink packaging applications. It is a moderate clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and general purpose applications. It is used in blends in monolayer products, and alone or in blends in multilayer films. It can be used in both cast and blown film processes. The leading film applications are shrink films and labels. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended. Due to the low glass transition temperature of this grade, shipment and storage of pellets at room temperature or below is strongly recommended.

PETROKEN (Petroquimica Ensenada S.A.)

PETROKEN (Petroquimica Ensenada S.A.) 1102 L

SCG Chemicals

SCG Chemicals WD2020P

SCG Chemicals WD2020P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Nippon Paper Industries

AUROREN® 150

AUROREN® 150 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 150 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 150.

SCG Chemicals

SCG Chemicals LP1100P

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

GCR Group

Granic® 1522

Granic® 1522 by GCR Group is a masterbatch based on ultrafine calcium carbonate to be compounded with Vistamaxx™ performance polymers. It is 100% recyclable, environment-friendly and just 20% dependent from crude oil. Offers good toughness, stiffness, elasticity and flexibility. Provides mineral loading, production reliability improvement and energy savings. Granic® 1522 is designed to provide an innovating solution for film and sheet applications.

Nishida Art Specialty Composite America

FULXUS® FX-SB-180

FULXUS® FX-SB-180 is used by changing the base resin from SEBS to SBS, low cost products can be manufactured. However, it has low weather resistance, and therefore it is not suitable for outdoor use.

Nano4

Nano4 Bio PE EC MB 12

Nano4 Bio PE EC MB 12 is an electrically conductive masterbatch based on bio-polyethylene.

Adiplast

Adiplast Wax AD - 80

Adiplast Wax AD - 80 is polyethylene wax used in adhesive manufacturing.

FengShun DongRay Fine Chemical

DONGRAY® PE WAX 300A

DONGRAY® PE WAX 300A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Soredi

NIPLENE T20

NIPLENE T20 contains characteristics called Homopolymer.

Hyundai EP

PLASMER® 1040DB/DN

PLASMER® 1040DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1040DB/DN is a fully crosslinked product and can be reused without scrap during processing.

Itochu Plastics

Itochu Plastics PHF4000R

PHF4000R is a polypropylene homopolymer designed for raffia application. Its unique formulation provides excellent low water carryover.

Forever Plast

FORLENE® HDPE 8.564

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Soredi

NIPLENE F50 AGR

NIPLENE F50 AGR contains characteristics called Chemically Coupled Reinforcement, Homopolymer.

Adiplast

Adiplast Wax AF

Adiplast Wax AF is polyethylene wax used in adhesive manufacturing.

Hyundai EP

PLASTOMER® 1090B/N

PLASTOMER® 1090B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1090B/N is a fully crosslinked product and can be reused without scrap during processing.

Yparex B.V.

Yparex® 9403 M

Yparex® 9403 M is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

Regal Petrochemical

Regal Petrochemical RG 1102 K

RG 1102 K is a Polypropylene Homopolymer With Low Water Carry Over and Preferred Grade for Tapes. It is used in Thermoformed Parts, Dairy Products, Tape Yarn, Raffia, MonoFilaments, Strapping Carpet Backing

Kolon Industries

HIKOTACK® P-120H

Kolon Industries HIKOTACK® P-120H is a pale yellow thermoplastic resin obtained from the copolymerization of aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers good solubility with various solvents and excellent compatibility with various polymers, and is mainly used as an additive for paint, ink and tackifier resin for Ethylene Vinyl Acetate (EVA) type hot melt adhesive (HMA). .

Itochu Plastics

Itochu Plastics PHS4000R

PHS4000R is general purpose injection molding, low water carryover polypropylene homopolymer.