Adhesives & Sealants

SWISLOYD

SWISLOYD Dehydrated Castor Oil SL-DCO

Swisloyd Dehydrated Castor Oil SL-DCO is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.

Carpenter Company

CARPOL® GP-6307

CARPOL® GP-6307 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300. This triol is polymerized with propylene oxide and then capped with 7% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, Carpol® GP-6307 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® EDAP-800

CARPOL® EDAP-800 is an ethylene diamine initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxide and has a mild catalytic nature. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, Carpol® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

Carpenter Company

CARPOL® GP-700

CARPOL® GP-700 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, Carpol® GP-700 may also be included as component in other urethane products and formulations.

Oltchim

PETOL® 400-3

PETOL 400-3 is a polyoxypropylene triol, 420-average molecular weight. It is a low viscosity polyol used in polyol blends for rigid polyurethane foam applications. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. PETOL 400-3 is also used in the production of adhesives and coatings.

Carpenter Company

CARPOL® PGP-1000

CARPOL® PGP-1000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 1000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-1000 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® GP-6015

CARPOL® GP-6015 (reactive triol) is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an anti-oxidant package tailored for this type of market.

Carpenter Company

CARPOL® GP-3000

CARPOL® GP-3000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-3000 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® GP-5015

CARPOL® GP-5015 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, Carpol® GP-5015 may also be included as a component in other urethane products and applications.

Carpenter Company

CARPOL® PGP-3000

CARPOL® PGP-3000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 3000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-3000 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® GP-4000

CARPOL® GP-4000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-4000 may also be included as a component in other urethane products and formulations.

PCC Chemax

Rokopol® M5020

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

Carpenter Company

CARPOL® GP-725

CARPOL® GP-725 (reactive triol) is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700. This triol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® GP-700. Main applications include C.A.S.E., however, Carpol® GP-725 may also be included as a component in other urethane products and applications.

Carpenter Company

CARPOL® GP-5171

CARPOL® GP-5171 (reactive Triol) is a glycerine initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000. This triol is polymerized with propylene oxide and ethylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, Carpol® GP-5171 may also be included as a component in other urethane products and applications.

Carpenter Company

CARPOL® EDAP-770

CARPOL® EDAP-770 is an ethylene diamine initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and has a mild catalytic nature. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, Carpol® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

GEO Specialty Chemicals Inc

TRI-REZ® Polyol 1030-60

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Carpenter Company

CARPOL® PGP-2000

CARPOL® PGP-2000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-2000 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® PGP-4000

CARPOL® PGP-4000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-4000 may also be included as a component in other urethane products and formulations.

Carpenter Company

CARPOL® GP-4520

CARPOL® GP-4520 (reactive triol) is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4500. This triol is polymerized with propylene oxide and then capped with 20% ethylene oxide. Main applications include C.A.S.E., however, Carpol® GP-4520 may also be included as a component in other urethane products and formulations.

GEO Specialty Chemicals Inc

DMPA® Polyol HA-0135

DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions.

Blackburn Chemicals

Dispelair® CF 395

Dispelair® CF 395 is a polyglycol based foam control agent. It is suitable for use in all types of PCES, highly effective in HPEG, MPEG and VPEG PCE production and are particularly effective when high compatibility and clarity are required within the PCE.

Blackburn Chemicals

Dispelair® CF 394

Dispelair® CF 394 is a polyglycol based foam control agent. It is suitable for use in all types of PCES, highly effective in HPEG, MPEG and VPEG PCE production and are particularly effective when high compatibility and clarity are required within the PCE.

Partners in Chemicals

OMNISTAB® UV 1130

OMNISTAB® UV 1130 acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a pumpable liquid useful in a variety of substrates and applications.

Baalbaki Chemical Industries

Basis® F 31

Basis® F 31 has Adipic Acid base used as adhesives, PUR hot melts, PU coatings, PU shoe soles, elastomers, PU flexible foam.

Carpenter Company

CARPOL® GP-1000

CARPOL® GP-1000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-1000 may also be included as a component in other urethane products and formulations.

Protactinium Chemical

Protactinium Chemical NASM -1007-10

Protactinium Chemical NASM -1007-10 is a waterborne polyester polyol (7% dimethyl-5-sodiosulfoisophthalate (SIPM)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.

Altropol Kunststoff

AltroColor PU 1908

AltroColor PU 1908 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems As our AltroColor PU 1900 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 1908 is oxide red colored.

Instrumental Polymer Technologies

Quickstar™ 750H

Quickstar™ 750H is low molecular weight dendrimeric polyol with aliphatic derivatization. Excellent for high solids or 100% solids systems. Excellent chemical resistance, hardness and abrasion resistance.

Jiahua Chemicals

Puranol G 303

Puranol G 303 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Elachem

ELAPOL 11108 B

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Jurong Ningwu New Material Development

Jurong Ningwu New Material Development NJ-204A

Jurong Ningwu New Material Development NJ-204A can be used to produce coatings, adhesives, sealants, elastomers, etc.

CHIMCOMPLEX

PETOL® 120-2

PETOL® 120-2 is a high purity polyoxypropylene glycol, homopolymer diol with an average molecular weight of 935, non-acidified quality.

Jurong Ningwu New Material Development

Jurong Ningwu New Material Development NJ-230

Jurong Ningwu New Material Development NJ-230 can be used to produce coatings, adhesives, sealants, elastomers, etc.

Jiahua Chemicals

Puranol G 5030

Puranol G 5030 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Korea PTG

Korea PTG PTMEG-250

Korea PTG PTMEG-250 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Protactinium Chemical

Protactinium Chemical NASM -1007

Protactinium Chemical NASM -1007 is a waterborne polyester polyol (7% dimethyl-5-sodiosulfoisophthalate (SIPM)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.