products in Adhesives & Sealants: Polyurethanes (PU)

Synthopol

LIOPUR PFL 1284

Aqueous solventfree Aliphatic polyurethane dispersion based on a special polyester combination

Resinlab

ResinLab® UR7024 Part A

ResinLab® UR7024 Part A is a two-part room temperature curing polyurethane adhesive designed to impart exceptional bond strength to polycarbonate. UR7024 Clear bonds and cures quickly to a clear flexible adhesive useful in applications that require tough, impact resistant clear parts and high peel strength. UR7024 Clear can also be used for general purpose adhesive applications and esthetic assemblies. UR7024 Clear was formulated to a 1A:1B volume mix ratio for use in side-by-side dispensing cartridges and meter/mix and dispense equipment. It will reach full cure at room temperature within 24 hours at room temperature. Cure time can be accelerated by the application of heat after product has gelled. Times and temperatures from 30 minutes at 65°C to 15 minutes at 100°C are typical for small castings (less than 50 grams). Time to heat substrate must be taken into account. Cooler temperatures will extend work time and increase cure time.

STOCKMEIER Urethanes USA

Stobicoll® T 505

Stobicoll® T 505 is a two-component slightly thixotropic polyurethane laminating adhesive designed for use in sandwich systems with various substrates with a mix ratio of 100:22 by weight.

Hitac Adhesives and Coatings

Hitac Adhesives and Coatings RA-23S-T

Hitac Adhesives and Coatings RA-23S-T is a high total solids solution of a polyurethane release agent in toluene. It offers significant improvements over other release agents, such as PVODC.

Akron Coating and Adhesives

Akron Coating and Adhesives ACA-30-100

Akron Coating and Adhesives ACA-30-100 is a waterborne blend of epoxy and polyurethane resins containing adhesion promoters. The system contains no crosslinkers when shipped. A crosslinker may be added to further enhance hot strength and solvent resistance, after which the product will have a 3 day pot life. Contact ACA regarding use of the crosslinker.

Evermore Chemical Industry

Evermore Chemical Industry SS-140BHR

Evermore Chemical Industry SS-140BHR has a one component PU adhesives with excellent flexibility, good hydrolysis resistance and good peeling strength.

Evermore Chemical Industry

Evermore Chemical Industry SS-1050BHR

Evermore Chemical Industry SS-1050BHR is a one component PU adhesives with good hydrolysis resistance and good adhesive.

ichemco

ichemco Ithane 02

Aromatic thermoplastic polyurethane resin in dry granules.

GSI Exim America

DAIPLACOAT RHC-530 CLEAR

DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by our advanced polymerization technique for paints and coatings.

ORG CHEM Group

Polyflo® 5

Polyflo® 5 is a C11-C24 high flash aromatic naphtha solvent. The aromatic content of Polyflo 5 is typically min. 99%. The product has no detectable level of naphthalene at a detection limit of 500 ppm. Applications include refining, fuel, and lube additives, industrial cleaning, sealants, and as a processing fluid.

Hitac Adhesives and Coatings

Hitac Adhesives and Coatings RA-44W

Hitac Adhesives and Coatings RA-44W is a water based release coating, a low adhesion backside (LAB), designed for tapes with paper a substrate.

Kleiberit

Kleiberit Adhesives USA 706.7.00

KLEIBERIT 706.7.00 is used in furniture and kitchen fronts, furniture side panels, furniture back panels, shelves.

Chemence

KRYLEX® KH108

KRYLEX® KH108 is a one component reactive polyurethane hot melt. It is solid at room temperature. After being applied warm the product will cool to allow immediate handling. Upon further exposure to ambient humidity KRYLEX® KH108 will achieve high strength bonds and excellent environmental resistance.

Chemence

KRYLEX® KH108B

KRYLEX® KH108B is a one component reactive polyurethane hot melt. It is solid at room temperature. After being applied warm the product will cool to allow immediate handling. Upon further exposure to ambient humidity KRYLEX® KH108B will achieve high strength bonds and excellent environmental resistance.

Griffon

Griffon Polyurethane adhesive

Griffon Polyurethane adhesive is Thixotropic, filling, waterproof, 2-component assembly adhesive based on polyurethane. .

Sapici Spa

POLURGREEN PRP 5500 01

POLURGREEN PRP 5500 01 have adhesives and sealants applications. POLURGREEN PRP 5500 Olis a branched polyether based prepolymer with low elongation and high modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 5500 Olis mainly used in the formulation of IK polyurethane adhesives and sealant with very low monomer content.

Bond Polymers International

Bondthane™ UD-104

Bondthane™ UD-104 is a medium soft solvent free polyurethane dispersion with an excellent blend of properties. It is heat sealable in adhesive applications and shows good adhesion to many substrates.

Synthopol

SYNTHOLUX 1014 W

Aqueous, Aliphatic polyurethane dispersion, physically drying and UV-curable. It does contain neither emulsifiers nor co-solvents

Silpak

Silpak RU-440

Silpak RU-440 is a liquid, two-component, 100% solids Urethane Elastomer RTV that is easy to process. This system is offers good strength properties with excellent library shelf-life. Use to make molds or rubber parts. Molds are used to cast concrete, wax, and plaster parts.

Jowat Corporation

Jowapur® 687.3

Jowapur® 687.30 is a stable and fiber-reinforced, thixotropic one-component adhesive, curing with wood moisture or ambient humidity. Adhesive for bonding soft wood species, windows, doors, construction elements, water-resistant particleboard, foam and insulation materials made of concrete, cork and coated cork, tiles, stone and many other substrates.

Chemence

KRYLEX® KHB8642B

KRYLEX® KHB8642B is a one component reactive polyurethane hot melt. It is solid at room temperature. It is a medium viscosity poly-battery assembly adhesive. After being applied warm the product will cool to allow immediate handling. Upon further exposure to ambient humidity KRYLEX® KHB8642B will achieve high strength bonds and excellent environmental resistance

Jowat Corporation

Jowapur® 685.12

Jowapur® 685.12 is a adhesive for bonding mineral aggregate panels, fiberboard, sandwich and composite panels made of soft wood species, for pur foam materials and polystyrene foam, and many other substrates.

Synthopol

LIOPUR PFL 3046

Aqueous Aliphatic polyurethane dispersion based on an oleochemical polyester, Surfactant- and TEA-free

Permabond Engineering Adhesives

PERMABOND® PT321

PERMABOND® PT321 is a 2-part, room temperature curing polyurethane adhesive. It is ideal for use on a wide variety of substrate materials including metals, plastics and composites.

Cromogenia Units

Forzal ASL 10 A

Forzal ASL 10 A is a bi-component (-NCO) solvent free polyurethane-based adhesive.

GSI Exim America

DAIPLACOAT RHC-731 CLEAR

DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by our advanced polymerization technique for paints and coatings.

Epaflex

Epaflex ET 220 SCB 1002 P

Epaflex ET 220 SCB 1002 P is a two-component polyurethane system suitable for the production of an expanded and flexible material. Particularly suitable for making air filter gaskets for automotive use, "panel" type.

Coating P. Materials

Coating P. Materials CX-6800M

Coating P. Materials CX-6800M is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Evermore Chemical Industry

Evermore Chemical Industry SS-1039F

Evermore Chemical Industry SS-1039F is a soft grad with excellent flexibility and good pigment dispersion.

Coating P. Materials

Coating P. Materials CX-6080

Coating P. Materials CX-6080 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Evermore Chemical Industry

Evermore Chemical Industry SS-136HR

Evermore Chemical Industry SS-136HR has a excellent flexibility at low temperature with good hydrolysis and solvent resistance. It is also good for re-coating.

STOCKMEIER Urethanes USA

Stobicoll® C 211

Stobicoll® C 211 is a two-component solvent free adhesive with fast setting time designed for adhering wood in the furniture industry.

BJB Enterprises

BJB Enterprises WC-575-AB

WC-575 A/B is a two-part, clear, colorless aliphatic-based polyurethane elastomer. It is recommended for use whenever a flexible, permanently transparent elastomer is required. Itis UV light and oxidation resistant and can be easily tinted or pigmented to clean bright colors.WC-575 A/B does not contain MOCA, TDI, or MDA. In addition to being an excellent castable product, it also functions well as an adhesive for bonding various substrates.

DELO

DELO-PUR 9692

DELO-PUR 9692 is a polyurethane , 2C , room-temperature-curing pasty, filled , flow-resis a tant, suitable for side-by-side cartridges, very good media resistance.

INDUSTRIA CHIMICA MEDITERRANEA

INDUSTRIA CHIMICA MEDITERRANEA Europur

INDUSTRIA CHIMICA MEDITERRANEA Europur is two-component polyurethane adhesive which are solvent-free polyurethane adhesives. Suitable for difficult bonding which are available in various versions.

Synthecoat

Accuapur 4502

ACCUAPUR 4502 aliphatic polyurethane aqueous dispersion, polyether base and solvent free.