products in Industrial & Assembly Adhesives: Coupling Agent

Mitsubishi Chemical Group Corporation

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ 1256

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Momentive Performance Materials

Silquest™ A-1100

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

Momentive Performance Materials

Silquest™ A-1387 Silane

Silquest™ A-1387 Silane is a Silicone Release Coating.

Momentive Performance Materials

Silquest™ VS-604

Silquest™ VS-604 silane typically provides excellent performance in the potentially cost-effective production of moisture crosslinkable silylated polyolefin compounds. It is a modified vinyltrimethoxysilane that may be considered for use in the manufacture of pipe, wire and cable and industrial goods.

Momentive Performance Materials

Silquest™ A-178

Silquest™ A-178 silane is a coupling agent for glass fiber and particulate filler reinforced composites. It is a 100% active methacrylamido functional silane that may be used to promote adhesion between a wide range of resins and substrates and reinforcements. It is also useful as a monomer in the synthesis of organic polymers. It functions as a moisture- activated crosslinking agent.

Momentive Performance Materials

Silquest™ A-187

Silquest™ A-187 silane is specially formulated for use as an adhesion promoter in SPUR + * prepolymer, urethane, epoxy, polysulfide, silicone and acrylic systems for caulks, coatings, sealants and adhesives. Its epoxy functionality allows Silquest™ A-187 silane to perform as a durable epoxy ring that is reactive with many organic functions. It also offers non-yellowing adhesion in many resin systems and has proven to increase the flexibility of systems when compared to other adhesion promoters under certain conditions.

Momentive Performance Materials

Silquest™ A-186

Silquest™ A-186 silane adhesion promoter, can result in better electrical and/or mechanical properties in a variety of applications and industries. From enhancing electronic encapsulants to enabling improved sealant formulations, Silquest™ A-186 silane provides both epoxy and silane functionalities that promote adhesion in a range of formulations, including SPUR+ prepolymer, urethane, epoxy, silicone, and acrylic caulks, coatings, sealants and adhesives.

Mitsubishi Chemical Group Corporation

jER™ 1750

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Momentive Performance Materials

Silquest™ A-Link* 35

Silquest™ A-Link 25 silane and Silquest™ A-Link 35 silane are unique isocyanate functional silanes. The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most active hydrogen containing compounds. The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates.

Momentive Performance Materials

Silquest™ VS-142

Silquest™ VS 142 Silane is a high purity, amino-alkyl-silane solution in water, and as such provides the performance of aminoalkylsilane esters such as Silquest™* A-1100 Silane, in a convenient prehydrolyzed form. Silquest™ VS 142 silane can be easily diluted with water and does not contain alcohol. and Resilency.

Momentive Performance Materials

Silquest™ A-1120

Silquest™ A-1120N(beta-aminoethyl) gamma-aminopropyltrimethoxy-silane is diamino func tional silanes that may be used over a broad range of applications. They are used to promote the adhesion of amino-reactive resins such as silicone, silylated polyurethane, two-part urethanes and two-part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers or reinforcements.

Momentive Performance Materials

Silquest™ A-189

Silquest™ A-189 silane chemically bonds reinforcing minerals such as silica, clay, mica and talc to the polymer matrix. This silane is especially useful in sulfur-cured and metal oxide-cured elastomers. It can be used as a pretreatment on minerals or added at the time of compounding.Improvement in mineral-filled elastomer properties, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time may be achieved with Silquest™ A-189 silane (gamma-mercaptopropyltrimethoxysilane).

Momentive Performance Materials

Silquest™ A-174NT

Silquest™ A-174NT silane is a momentive performance materials, methacryloxy functional trimethoxy silane that finds utility in coating, composite and adhesive and sealant systems that cure via a free radical mechanism.

Momentive Performance Materials

Silquest™ A-1106

Silquest™ A-1106 silane is an aqueous solution of an aminoalkyl siloxane. This alcohol-free siloxane improves signifi- cantly the adhesion and coupling between organic resins and inorganic surfaces. Momentive Performance Materials Silquest™ A-1106 silane is most often used in aqueous systems where the alcohol of hydrolysis causes instability of the formulation or where a high flash point additive is required. The product also reduces volatile organic content (VOC) and does not contain hazardous air polluting substances (HAPS). These benefits are particularly useful to manufacturers seeking to reduce emissions from their water-borne products and processes.

Momentive Performance Materials

Silquest™ Y-9669

Silquest™ silane Y-9669 combines phenyl and amino functionality in the same molecule.It is an extremely effective adhesion promoter for many filled and reinforced resin systems. Silquest™ silane Y-9669 is a versatile adhesion promoter, particularly for resin systems that will react with a secondary amino group, such as isocyanates, acrylates, epoxies, phenolics and RTV silicones. This silane is especially useful when the resulting material must withstand higher temperatures; e.g., in phenolic resin/fiberglass composites.

IGM Resins

Photomer 5042

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

BTC Europe GmbH

Acronal® MB 5036

Acronal® MB 5036 serves as an adhesion promoter, binder, and coupling agent in various applications, particularly within the adhesives and sealants industry, including industrial and assembly adhesives. It plays a pivotal role in industrial manufacturing processes. Available in a liquid form, this dispersion enhances adhesion and cohesion properties, contributing to the overall performance of adhesives and sealants. As a key ingredient in CASE (coatings, adhesives, sealants, and elastomers) formulations, Acronal® MB 5036 ensures optimal results, showcasing its versatility and efficacy in diverse applications.

Evonik

VISIOMER® TRGDMA

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

Evonik

VISIOMER® HEMA-P 100

VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. This monomer can be used as a functional co-monomer in acrylic emulsions for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations.

Evonik

VISIOMER® HEMA-P 70 M

VISIOMER® HEMA-P 70 M is a monofunctional methacrylate with a phosphate group in the side chain. It is supplied in 30% methyl methacrylate, which gives it a low viscosity and makes it easy to handle. This monomer provides superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. Visiomer® HEMA-P 70M can be used as a functional co-monomer in acrylic emulsions for coating resins, as well as an adhesion promoter in adhesive formulations.

Wacker Chemie AG

GENIOSIL® GF 9

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.

Thomas Swan

Casabond™ TX

Casabond™ TX provides a useful means of bonding rubber doughs, solution coatings and solvent based dips to a variety of synthetic textiles.

Thomas Swan

Casabond™ TXE

Casabond™ TXE provides a useful means of bonding rubber doughs, solution coatings and solvent based dips to a variety of synthetic textiles.

IGM Resins

Photomer 4703

PHOTOMER® 4703 is a proprietary UV/EB curable monoacrylate with low viscosity. It is designed for use in laminating adhesives, etch-resist inks for printed circuit boards, negative photoresists and OPV's for paper and films.

Momentive Performance Materials

Silquest™ A-1524

Silquest™ A-1524 is a 100% active ureidosilane, silane which is specially formulated to promote superior adhesion across a wide range of applications including resins, substrates, fillers and reinforcements. Being 100% active, Silquest™ A-1524 silane contains no alcohol or other solvent diluent. These traits make Silquest™ A-1524 silane an excellent choice for use in reactive polymer systems such as isocyanate-terminated polyurethane polymers. With its methoxysilane ester reactive groups, Silquest™ A-1524 silane exhibits fast hydrolysis of the silane ester group.

Momentive Performance Materials

Silquest™ A-1170

Silquest™ A-1170 is a Amino bis-silanes can be effective in reacting with epoxy, urethane, melamine, polyimide, phenolic and furan thermosetting resins, as well as many thermoplastics, such as polyamides and polyesters. Silquest™ A-1170 silane offers a fast cure time and/or rapid adhesion build. Because of its higher purity grade, Silquest™ A-1170 silane is an excellent candidate to consider for use in applications that demand low color and greater control of reaction stoichiometry. Silquest™ A-1170 silane is a versatile silane, and it may be added directly to polymers during system formulation or used independently as a primer.

Chemstar

StarBond® 140

StarBond® 140 is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. It is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. StarBond 140 is an excellent product for binding and adhesive applications where economics is important.

Caplinq

Caplinq Hydroxyl Functional Adhesion Promoter

Caplinq Hydroxyl Functional Adhesion Promoter is a proven supplier of industrial-grade coatings, introduces their patented Hydroxyl Functional Adhesion Promoter. Aculon's Hydroxyl Functional Adhesion Promoter is easy to apply and will enhance your surface's adhesive capabilities. Aculon’s Primers are easy to apply and can solve problematic adhesion issues. Also, their actives can be blended into existing formulations for increased surface adhesion of coatings and adhesives.

Chemstar

GlucoStar® C500F

GlucoStar® C500F is a cold-water soluble, high viscosity, anionic polymer for use in industrial applications. It is a substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, surface activity, water retention, improved rheology and viscosity. GlucoStar C500F also offers a unique alternative to competitive natural and synthetic water-soluble polymers. GlucoStar C500F is specifically designed for use as a viscosifier in vat dyestuffs for textile flat goods printing applications. In addition, the ultra-low level of insoluble particles and high viscosity of GlucoStar C500F make it a good thickener for screen-printing

Caplinq

Caplinq Methacrylate Functional Adhesion Promoter

Caplinq Methacrylate Functional Adhesion Promoter is a proven supplier of industrial-grade coatings, introduces their patented Methacrylate Functional Adhesion Promoter. Aculon's Methacrylate Functional Adhesion Promoter is easy to apply and will enhance your surface's adhesive capabilities. Aculon’s Primers are easy to apply and can solve problematic adhesion issues. Also, their actives can be blended into existing formulations for increased surface adhesion of coatings and adhesives.