312 products found for Furniture Adhesives in Industrial & Assembly Adhesives
GP® BRSD-2112 coating/adhesive resin is a liquid heat-reactive phenolic-based resin solution.
Omnistab IN 520
Omnistab IN 520 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.
Omnirad 184 is a highly efficient non-yellowing photoinitiator used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional vinyl monomers.
PHENODUR® VPR 1740/50WA
PHENODUR® VPR 1740/50WA is a dispersion based on phenol resol. This product is used as a binder for coated abrasives and impragnation. It shows a high drying and curing speed because of its dispersion characteristic. On organic and inorganic surfaces this product exhibits good adhesion.
Omnirad 819 is a versatile photoinitiator for radical polymerization of unsaturated resins upon UV light exposure. It is especially suitable for white pigmented Formulations, the curing of glass-fiber-reinforced polyester/styrene systems and for clear coats for outdoor use in combinations with light stabilizers. Thick section curing is also possible with this photoinitiator.
Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).
Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odour and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.
PHOTOMER® 5930 is a tetra functional amine modified polyether acrylate used in UV/EB applications.
ADDAPT Chemicals BV
ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.
Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.
Omnistab OB is a fluorescent whitening agent for plastic, paint, ink and photographic paper. It is efficient and stable at high temperatures.
Luna-nox AO-76 is a sterically hindered amine phenolic antioxidant to be used as a highly efficient stabilizer for organic substrates such as plastics, coatings, adhesives and waxes. It protects substrates against thermo-oxidative degradation. This product is odorless and has excellent light stability. This product is available in Europe, Asia and North America.
Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.
PHOTOMER® 6692 is a non-yellowing hexa-functional petia free and tin free aliphatic urethane acrylate with relatively low viscosity. It exhibits of excellent adhesion and scratch resistance.
PHOTOMER® 4967 is an acrylated amine adduct, which exhibits low viscosity, low odour, improved stability, and excellent compatibility with monomers and oligomers. Cure characteristics and adhesion properties are enhanced when this product is properly formulated with photocatalyst (benzophenone).
PHOTOMER® 4250 is a 100% active, multifunctional amine acrylate. This product is primarily used in place of free amines. PHOTOMER® 4250 offers an excellent way to increase system cure speeds, while minimizing amine migration and ink burn-out.
Luna-DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and UV stability. Luna-DAAM can be used in the following areas: paper treatment, adhesives, water borne coatings (cross linkable at room temperature), photosensitive resins, crosslinking agents, textile treatment, hairsprays and resin modifier. This product is available in Europe, Asia and North America.
Luna DCD 10
Luna-DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and North America.
Polyols and Polymers
POLYTONE™ AP 109 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.
Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.
Omnirad 73 is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.
Omnirad 907 is a highly efficient photoinitiator which is used to initiate the photo polymerization of unsaturated prepolymers, e.g., acrylates, in combination with mono- or multifunctional vinyl monomers.
Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.
PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.
Omnirad BL 750
Omnirad BL750 is a photo initiator blend for curing clears and white systems by UV LED Lamps at 395 nm.
Egyptian Carbonate Company (S.A.E.) ECC
MICROCARB NF5 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.
Jesons Industries Ltd
BONDEX® SH is Poly Vinyl Acetate based Adhesive for Woodworking, Furniture making and Packaging application. It is water based smooth creamy emulsion having good tack and excellent bond strength.
PHOTOMER® 3016-40R is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.
Omnivad 280 is a radically curable silicone acrylate utilized in a broad array of UV/EB curable coatings and printing inks. Omnivad 280 provides superior substrate wetting and surface slip by reducing the surface coefficient of friction. It enhances durable anti-mar and anti-blocking performance.
Photomer 3016 LT
PHOTOMER® 3016 LT is a non-volatile, 100% bisphenol A type difunctional epoxy acrylate oligomer. The product is designed for use in UV/EB curing applications and exhibits fast cure speed, good solvent resistance and high gloss. It is characterised by its low irritancy and versatility.
Omnistab BP 12
Omnistab BP 12 UV light absorber is a derivative of 2 hydroxy benzophenone. It retards photo oxidative degradation and so helps prevent the discolouration and delamination of clear coatings.
Omnistab IN 518
Omnistab IN 518 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.
Esacure KIP 150
Esacure KIP 150 is an oligomeric polyfunctional α-hydroxyketone characterised by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odour and low yellowing are required characteristic.
Polyols and Polymers
POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.
Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.
PHOTOMER® 3005 is a reactive epoxy soybean oil acrylate. It has 100% solids and medium viscosity designed for UV/EB curable systems. It forms flexible films, exhibits moderate cure speed and low odour. Due to its oleophilic character, it contributes toward enhanced compatibility with hydrophobic (nonpolar) substrates and it enhances the wetting of organic pigments.