products in Industrial Manufacturing

IGM Resins

Photomer 5442

Photomer 5442 is a modified polyester for printing inks. Photomer 5442 exhibits excellent pigment wetting and good flexibility.

Munzing

WÜKONIL® HS

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

IGM Resins

Omnistab LS 292

Omnistab LS 292 is a liquid hindered amine light stabilizer (HALS). It provides outstanding light stability to many industrial and automotive coatings, as well as providing long-term stability to a wide variety of polymeric systems including styrene’s, acrylics, polyethylene, polypropylene, and polyurethane.

Munzing

TAFIGEL® PUR 82

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

Munzing

AGITAN® 526

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Kraton

Kraton™ D1157 A

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

IGM Resins

Photomer 6621

PHOTOMER® 6621 is a tin free, hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure performance in addition PHOTOMER® 6621 exhibit high hardness and solvent resistance

IGM Resins

Photomer 5042

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

Kraton

Kraton™ D1111 K

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Petro-Canada

PURETOL™ 22D

PURETOL™ 22D, odorless and colorless, is a white mineral oil with a Saybolt viscosity of 220 and a specific gravity of 0.862. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets the purity requirements of European Pharmacopeia (Ph. EUR.) - Paraffin, Liquid and United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Kraton

Kraton™ D1163 J

Kraton D1163 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1163 JSP supplied as dusted, dense pellet. Kraton D1163 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Petro-Canada

PURETOL™ 13

PURETOL™ 13 is an odorless and colorless white mineral oil with a Saybolt viscosity of 130 and a specific gravity of 0.853. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets National Formulary (NF) - Light Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

IGM Resins

Omnistab 123

Omnistab 123 is a liquid HALS stabilizer based on aminoether functionality. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts.

Munzing

AGITAN® 108

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

Munzing

AGITAN® 280

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

Munzing

AGITAN® DF 999

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

IGM Resins

Photomer 6644

PHOTOMER® 6644 is a non yellowing di functional aliphatic urethane acrylate, which exhibits of excellent flexibility and elongation.

Bernd Schwegmann

SCHWEGO® foam 8013

Defoamer for water-based coating systems, silicone free. SCHWEGO foam 8013 is a highly effective defoamer suitable for water- based systems and adhesives especially for those based on polyurethane and acrylate.

Petro-Canada

PURETOL™ 10

PURETOL™ 10 is an odorless and colorless white mineral oil with a Saybolt viscosity of 100 and a specific gravity of 0.857. This material meets National Formulary (NF) - Light Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Munzing

AGITAN® DF 6120

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

IGM Resins

Photomer 3005

Photomer® 3005 is a reactive epoxy soybean oil acrylate. It has 100% solids and medium viscosity designed for UV/EB curable systems. It forms flexible films, exhibits moderate cure speed and low odor. Due to its oleophilic character, it contributes toward enhanced compatibility with hydrophobic (nonpolar) substrates and it enhances the wetting of organic pigments.

Kraton

Kraton™ D1102 J

Kraton D1102 J is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature: Kraton D1102 JSZ - supplied as crumbs dusted with amorphous silica Kraton D1102 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton

Kraton™ D0243 K

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D1118 K

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D1157 E

Kraton D1157 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 ES - supplied as porous pellets dusted with amorphous silica Kraton D1157 ETM - supplied as powder dusted with talc for the North American market Kraton D1157 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

IGM Resins

Photomer 5450

PHOTOMER® 5450 is a hexafunctional polyester acrylate recommended for fast cure and pigmentwetting.

BTC Europe GmbH

Luphen® D 259 U

Luphen® D 259 U is a polymer dispersion used in the manufacture of laminating adhesives. The aqueous dispersion of a polyether polyurethane elastomer adheres well to plastics used in laminates. Adding a water-dispersible polyisocyanate increases its resistance to heat and moisture, impacting the potlife of the adhesive based on the reactivity of the polyisocyanate used.

BTC Europe GmbH

Acronal® MB 5036

Acronal® MB 5036 serves as an adhesion promoter, binder, and coupling agent in various applications, particularly within the adhesives and sealants industry, including industrial and assembly adhesives. It plays a pivotal role in industrial manufacturing processes. Available in a liquid form, this dispersion enhances adhesion and cohesion properties, contributing to the overall performance of adhesives and sealants. As a key ingredient in CASE (coatings, adhesives, sealants, and elastomers) formulations, Acronal® MB 5036 ensures optimal results, showcasing its versatility and efficacy in diverse applications.

BTC Europe GmbH

Acronal® A 240

Acronal® A 240 is an APEO-free, aqueous adhesive dispersion specifically employed in manufacturing pressure-sensitive adhesives for self-adhesive articles. It comprises an acrylic copolymer dispersion containing carboxyl groups. Its market focus includes adhesives and sealants, industrial printing, and packaging, catering to applications in chemical and industrial manufacturing. This product is in liquid form.

BTC Europe GmbH

Acronal® A 107

Acronal® A 107 serves as a tackifying admixture in the production of dispersion-based construction adhesives and expandable joint sealing tapes. It's an aqueous dispersion containing a polyacrylic acid butyl ester with low cohesion. This dispersion is neutralized with ammonia and is manufactured without the use of APEO, or formaldehyde. It exists in liquid form, presenting a white color, and is almost odorless.

BTC Europe GmbH

Acronal® V 212

Acronal® V 212 is an aqueous dispersion of an acrylic ester copolymer containing carboxyl groups, produced without the use of APEO. Its physical form is a liquid, aqueous polymer dispersion. This versatile product finds application in the production of adhesives with a pressure-sensitive character, distinguished by excellent adhesive properties, even in cold temperatures, low water sensitivity, and strong adhesion to both rigid and flexible PVC films, polyester films, electrically pretreated polyethylene, and polypropylene films. Remarkably, it achieves robust adhesion even without the use of adhesion promoters.

BTC Europe GmbH

Luvitec® K 90 solution 20%

Luvitec® K 90 solution 20% concentration serves as a binder, finding applications in the building materials and paper and pulp industries. This solution is environmentally friendly and caters to various market segments, including adhesives and sealants, industrial, and printing and packaging. It is used in chemical manufacturing, industrial adhesives and sealants, packaging and paper (particularly flexible packaging adhesives), industrial additives for paper and pulp, and printing and packaging for tapes, labels, and adhesives. Its physical form is in a liquid state.

BTC Europe GmbH

Luvitec® VA 64 powder

Luvitec® VA 64 powder is a versatile binder powder is intended for use in a wide range of industrial applications, especially in the manufacturing and chemical industries. Its versatility in the field of adhesives and sealants is demonstrated by the fact that it finds application in both flexible packaging and industrial assembly. It also plays a part in pulping and processing activities in the paper and pulp industries. Furthermore, this powder is very helpful in the printing and packaging industry for making labels, tapes, and adhesives, particularly for flexible packaging. Luvitec® VA 64 powder, in powder form, is a binder that performs well in a variety of industrial applications.

BTC Europe GmbH

Lumiten® I-SC

Lumiten® I-SC is an anionic surfactant used to improve the wetting power of polymer dispersions. It is a solution of sodium sulphosuccinate ethoxylate and a nonionic tenside in water. This surfactant enhances the wetting power of polymer dispersions, particularly during processing with machinery, and performs well in combination with nonionic wetting agents and emulsifiers.

BTC Europe GmbH

Acronal® 4 D

Acronal® 4 D is a dispersion of polyacrylic acid butyl ester in water, used to manufacture pressure-sensitive adhesives for self-adhesive articles. It is particularly employed in the production of pressure-sensitive adhesives for adhesive tapes and films. When using plasticized PVC film as the base film, consideration should be given to potential plasticizer migration affecting the adhesive properties.

BTC Europe GmbH

Acronal® A 245

Acronal® A 245 is a specialized product designed for pressure sensitive adhesive applications, offering distinctive features such as superior durability and resistance to varying weather conditions. Serving dual functions as both a binder and resin, it caters to diverse markets, particularly adhesives and sealants and the broader industrial sector. Acronal® A 245 is tailored for use in chemical and industrial manufacturing. Classified as a pressure sensitive adhesive, Acronal® A 245 adopts a liquid form, enhancing its versatility and facilitating seamless integration into various manufacturing settings.