products in Other Adhesives & Sealants Applications: Coupling Agent

Mitsubishi Chemical Group Corporation

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ 1256

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Momentive Performance Materials

Silquest™ A-1100

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

AB Specialty Silicones

Andisil® 78 Silane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® OH 50,000

Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Mitsubishi Chemical Group Corporation

jER™ 1750

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

AB Specialty Silicones

Andisil® OH 750

Andisil® OH 750 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® 2120 Silane

Diamino-functional silane that provides superior elongation, flexibility, and spreading at the interface as a coupling agent. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Sanyo Chemical America Incorporated

UMEX 100TS

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

AB Specialty Silicones

Andisil® OH 20,000

Andisil® OH 20,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

ichemco

Curing Agent X7

CURING AGENT X7 is polyfunctional aziridine, employed as crosslinking agent and adhesion promoter. It is a clear, amber liquid, miscible in water and many common organic solvents. Aziridine content is 6,35-7 meq/g

ADDAPT Chemicals BV

PolySurF™ HP

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

AB Specialty Silicones

Andisil® 137 Silane

Andisil® 137 Silane is a monomeric medium-chain alkyl functional silane. Andisil® 137 Silane is a clear, colorless liquid with an odor characteristic of alcohols.

AB Specialty Silicones

Andisil® 1524 Silane

Ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® 1110 Silane

Aminopropyltrimethoxysilane. Superior adhesion promoter in RTV silicones and other hybrid sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® 174 Silane

Methacryl-functional silane is used as an adhesion promoter at organic/inorgainc interfaces, as a surface modifier (e. g. Imparting water repellency, organophilic surface adjustment) or as a crosslinker of polymers. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® 1100 Silane

Aminopropyltriethoxysilane. Maximizes the physical and electrical properties thermoset and thermoplastic composites. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® 6021 Silane

Andisil® 6021 Silane is a bifunctional silane possessing a reactive amino groups and hydrolysable methoxysilyl groups. The dual nature of its reactivity allows it to bind chemically to both inorganic materials (e.g. Glass, metals, fillers) and organic polymers (e.g. Thermoplastics, thermosets or elastomers).

Advanced Polymer, Inc

AdvaBond® 8203

AdvaBond® 8203 is a chlorinated polypropylene resin solution that provides excellent adhesion to polyolefinic substrates, especially PP, TPO and EPDM. AdvaBond® 8203 can be used as a primer or as an additive to a coating or adhesive formulation.

Advanced Polymer, Inc

AdvaBond® 8214

AdvaBond® 8214 is a chlorinated polypropylene resin solution that provides excellent adhesion to polyolefin substrates. AdvaBond® 8214 can be used as a primer or as an additive to a coating formulation.

FedChem

Manchem® Zircoaluminates

Manchem® Zircoaluminates feature an inorganic metal component and an organic component. The bi-functional nature enables them to “bridge” or couple two or more species through irreversible chemical interactions. Common applications which are well suited for this adhesion technology are Coatings, Inks, Rubber and Adhesives.

DOG Chemie

Deolink® Amino PH-40

DOG Chemie Deolink Amino PH-40 is a 40 %, pre-hydrolysed 3-aminopropyl triethoxy silane in a methanol-free solution. Deolink Amino PH-40 is a ready-to-use primer and improves the adhesion to suitable substrates. Deolink® Amino PH-40 is a versatile primer and an adhesion promoter for amino-reactive resins.

Oxford Advanced Surfaces

Onto™ SB1050

Onto™ SB1050 does functional surface treatment that improves the adhesive bond strength in bonded systems containing engineering polymers, high performance plastic composites and other advanced materials. The treatment is designed to promote adhesion of polyurethane and epoxy adhesives. It is a practical solution to surface preparation that is simple to use and requires no specialist coating equipment.

Evonik

VISIOMER® TRGDMA

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

Evonik

VISIOMER® HEMA-P 100

VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. This monomer can be used as a functional co-monomer in acrylic emulsions for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations.

Evonik

VISIOMER® HEMA-P 70 M

VISIOMER® HEMA-P 70 M is a monofunctional methacrylate with a phosphate group in the side chain. It is supplied in 30% methyl methacrylate, which gives it a low viscosity and makes it easy to handle. This monomer provides superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. Visiomer® HEMA-P 70M can be used as a functional co-monomer in acrylic emulsions for coating resins, as well as an adhesion promoter in adhesive formulations.

Sanyo Chemical America Incorporated

UMEX 5200

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

Sanyo Chemical America Incorporated

UMEX 1001

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

Sanyo Chemical America Incorporated

UMEX 1010

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

Sanyo Chemical America Incorporated

UMEX 110TS

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

AB Specialty Silicones

Andisil® 142 Silane

Andisil® 142 Silane is an aqueous solution of an aminoalkyl siloxane. This alcohol-free siloxane significantly improves the adhesion and coupling between organic resins and inorganic surfaces. Andisil® 142 Silane silane is most often used in aqueous systems where the alcohol from hydrolysis causes instability of the formulation or where a high flash point additive is required. The product also reduces volatile organic content (VOC) and does not contain hazardous air polluting substances (HAPS). These benefits are particularly useful to manufacturers seeking to reduce emissions from thier water-borne products and processes.