products in Other Adhesives & Sealants Applications: Silicones

AB Specialty Silicones

Andisil® 78 Silane

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AB Specialty Silicones

Andisil® OH 50,000

Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® SF 1143

Andisil® SF 1143 are trimethylsiloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability.

AB Specialty Silicones

Andisil® OH 750

Andisil® OH 750 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Munzing

AGITAN® 701

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.

Munzing

AGITAN® 731

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

AB Specialty Silicones

Andisil® OH 20,000

Andisil® OH 20,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Jiande City Silibase Silicone New Material Manufacturer

Silibase SR-6202N Liquid MQ Silicone Resin

Silibase SR-6202N Liquid MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202N VMQ Silicone Resin can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

AB Specialty Silicones

Andisil® OH 40

Andisil® OH 40 is a Low viscosity 3.5% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® DMOS

Jiande City Silibase Silicone New Material Manufacturer

Silibase SR-6202P MQ Silicone Resin

Silibase SR-6202P MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202P MQ Silicone Resin Powder can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

Jiande City Silibase Silicone New Material Manufacturer

Silibase SR-6202S MQ Silicone Resin

Silibase SR-6202S MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202S Liquid MQ Silicone Resin can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

Evonik

Evonik Crosslinker 100

Evonik Crosslinker 100, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

Evonik

ALBIDUR® VE 3940

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.

Evonik

Evonik Crosslinker 110

Evonik Crosslinker 110, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

Evonik

TEGO® Antifoam 1435

TEGO® Antifoam 1435 is a silicone oil-based defoamer emulsion featuring non-ionic emulsifiers. This product serves as a ready-to-use antifoam solution, ideal for post-defoaming in surfactant-based systems, as well as in applications like printing pastes and non-woven production. TEGO® Antifoam 1435 excels as a silicone oil-free antifoam, efficiently controlling foam with minimal usage, ensuring process effectiveness.

CHT Group

HANSA CARE HTC

HANSA CARE HTCare comprises reactive polymers designed to improve the durability and water repellency of various formulations. These silicone resins can be combined with reactive Aminosiloxane to create high-quality sealants for car care or long-lasting impregnation agents for mineral surfaces. In addition to these applications, silicone resins from HANSA CARE HTCare are also utilized in car polishes, spray waxes, and impregnation agents for kitchen worktops and wood surfaces.

AB Specialty Silicones

Andisil® SF 1222

Andisil® SF 1222 are trimethylsiloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability

AB Specialty Silicones

Andisil® SF 1230

Andisil® SF 1230 are trimethyl-siloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability.

AB Specialty Silicones

Andisil® SF 1221

Andisil® SF 1221 are trimethylsiloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability.

AB Specialty Silicones

Andisil® SF 1243

Andisil® SF 1243 are trimethyl-siloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability

AB Specialty Silicones

Andisil® SF 1223

Andisil® SF 1223 are trimethylsiloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability

AB Specialty Silicones

Andisil® SF 1208

Andisil® SF 1208 are trimethylsiloxyterminated dimethyl diphenyl polysiloxanes that are available with various phenyl contents and viscosities. These fluids are most often used in high and low temperature applications to enhance temperature stability. Low temperature flexibility can be improved with phenyl contents of 3-8 mole %. Higher phenyl contents improve high temperature thermal stability.

AB Specialty Silicones

Andisil® OH 1,000

Andisil® OH 1,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 6,000

Andisil® OH 6,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 70

Andisil® OH 70 is a Low viscosity 1.25% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 80,000

Andisil® OH 80,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® MOS

Andisil® MOS is a Methyl tris(MEKO)silane. Andisil® Oximes are liquid raw materials for neutral condensation curing silicone sealants. In the presence of a (tin) catalyst these silanes react with hydroxyfunctional silicone polymers; exposure to moisture results in the formation of crosslinked, elastomeric silicones. In contrast to acidic or basic curing systems, no acidic acid or amine, but 2-butanoneoxime is liberated during application. Due to the neutral character of 2-butanoneoxime, sealants based on Andisil® Oximes can be applied even on (corrosion) sensitive substrates like metals or marble.

AB Specialty Silicones

Andisil® OH 3,500

Andisil® OH 3,500 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 2,000

Andisil® OH 2,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 14,000

Andisil® OH 14,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 30

Andisil® OH 30 is a Low viscosity 6% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 4,000

Andisil® OH 4,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

AB Specialty Silicones

Andisil® OH 300,000

Andisil® OH 300,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Siliconi

Siliconi AF 16

Siliconi AF 16 is a new and innovative silicone antifoam product proposed by spa.Formulated to prevent, control and eliminate foam from all aqueous systems with indirect food contact. antifoam Siliconi AF16 it is recommended for all industrial processes where it is necessary to break down and prevent the foam. In particular, in all processes of water treatment; during distillation, evaporation and fermentation, production of both industrial and household detergents, production and processing of paper, production of fertilizers, pesticides, adhesives etc… Siliconi AF16 had been formulated by a team of experts. It exploits chemical and physical basics that eliminates the air in the mixture, and it acts to prevent the successive foam building. In this way all the air bubbles bonded to each other and subsequently expelled. Another point of strength of the defoamer Siliconi AF16 lies in its ease of use. Really an important innovation to be employed in many industrial processes.

Aptek Laboratories

Aptek® 2717-A/B

Aptek® 2717-A/B is a two component, black, low modulus, thixotropic, silicone adhesive displaying very low temperature flexibility and good physical strength properties. Aptek® 2717-A/B has been designed to fully cure at room temperature and can be accelerated with a brief low temperature cure. This 100% solids system has been manufactured with highly pure resins to minimize the occurrence of ionic contamination without outgassing during cure or service.