Other Adhesives & Sealants Applications

Sasol

ISOFOL 28

ISOFOL 28 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-dodecyclhexandecanol and is also referred to as C28 Guerbet alcohol.

Mitsubishi Chemical Group

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

ISOFOL 24

ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-decyl-1-tetradecanol and is also referred to as C24 Guerbet alcohol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

Sasol BHT

BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Mitsubishi Chemical Group

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications.   Features Polymer-type epoxy resin with epoxy functional groups at the both ends High molecular weight High softening points  Good adhesion Applications PCM, CAN and other coatings Paint Thermoplastics  Printed electronics  Plastic processing    *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).BenefitsExcellent adhesivenessMaintains high electrical reliability FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)ApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol   Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption  Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

ISOFOL 16

ISOFOL 16 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-hexyl-1-decanol and is also referred to as C16 Guerbet alcohol. It is used in personal care. ISOFOL 16 is a medium spreading emollient, basic material for the production of emollient esters. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/90

MARLIPAL O13/90 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ISOFOL 32

ISOFOL 32 Alcohol is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-tetradecyl-1-octadecanol and is also referred to as C32 Guerbet alcohol. It is used in personal care as consistency regulator and rich emollient basic material for the production of emollient esters. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Dynasol Elastomers

Solprene® 1205

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

Sasol

MARLIPAL O 13/109

MARLIPAL O13/109 is based on a primary, multibranched C13 alcohol with approx. 10 moles ethylene oxide. The product contains approx. 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Mitsubishi Chemical Group

jER™ 1256

jERTM 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

MARLIPAL 24/20

MARLIPAL 24/20 is based on a primary linear C12-C14 fatty alcohol with approx. 2 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/20 is also available as RSPO-MB grade. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

TRIDAC ISO-6

TRIDAC ISO-6 is a fatty alcohol polyethyleneglycol ether, based on MARLIPAL 13 and ethylene oxide (about 6 moles). It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/100

Marlipal O 13/100 is a oxoalcohol C 13 + 10 mol of ethylene oxide. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/40

MARLIPAL O13/40 is based on a primary, multibranched C13 alcohol with approx. 4 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/30

MARLIPAL O13/30 is based on a primary, multibranched C13 alcohol with approx. 3 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Vink Chemicals

parmetol® A 26 N

parmetol® A 26 N is a preservative for technical products Stabilised aqueous preparation based on chloromethyl-/ methylisothiazolone (CMI/ MI)and reaction product of ethylene glycol, urea and Paraform Suitable for preservation

Mitsubishi Chemical Group

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).   Benefits Excellent adhesiveness Good elastic recovery  Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Low viscosity Applications Electrical and electronic applications  Potting & encapsulation materials Adhesives   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

MARLIPAL O 13/99

MARLIPAL O13/99 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. The product contains 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLINAT 242/28

MARLINAT 242/28 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/80

MARLIPAL O13/80 is based on a primary, multibranched C13 alcohol with approx. 8 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

INVISTA

Dytek® HMD

DYTEK® HMD (hexamethylene diamine) is a highly pure (>99.9%) aliphatic diamine. DYTEK® HMD is used in the production of Nylon polymers, isocyanates, polyamide resins and adhesives. Other applications include water treatment, UV stabilizers, scale and corrosion inhibitors, and petroleum additives. This product is available as an anhydrous that is solid at room temperature and can be shipped as a warm liquid or diluted aqueous solution.

Sasol

EMULDAC AS-25

EMULDAC AS-25 is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing tablets and toilet rim blocks. EMULDAC AS-25 is also suitable for personal care applications as O/W emulsifier in a broad range of pH and as dispersant for hair-dyeing formulations. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/50

MARLIPAL O13/50 is based on a primary, multibranched C13 alcohol with approx. 5 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Momentive Performance Materials

Silquest™ A-1100

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

Sasol

GALENOL 1618 AE

Galenol 1618 AE is a Special Compound belonging to Sasol's Other Nonionics and Blends range of products. GALENOL 1618 AE is a biodegradable, multipurpose emulsifying alcohol derived from vegetable cetearyl alcohol. This non-ionic self-emulsifying O/W base provides emulsifying and stabilizing properties to lotions, creams, hair colorant creams, developer emulsions, hair relaxers, hair conditioners and depilatory creams, stable over a wide pH range and in the presence of high electrolyte levels. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Kolon Industries

SUKOREZ® SU-640

SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Sasol

TRIDAC ISO-40

TRIDAC ISO-40 is a fatty alcohol polyethyleneglycol ether, based on MARLIPAL 13 and ethylene oxide (about 40 moles). It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLOSOL TA 50

MARLOSOL TA 50 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Munzing

AGITAN® 109

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

Dynasol Elastomers

Paracril™ BJLT-M50

Paracril BJLTM50 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer. Packing

Nippon Shokubai

EPOMIN SP-200

EPOMIN SP-200 is the water soluble polymer which is made by polymerization of ethyleneimine. EPOMINE is not a entirely linear polymer but a partly branched polymer containing primary, secondary, and tertiary amine.

Monument Chemical

Monument Chemical Tetrahydrofuran (THF)

Monument Chemical Tetrahydrofuran (THF) is a clear, colorless liquid with an ether‐like odor. The principal end uses of THF include PTMEG, pharmaceutical solvent, adhesives, PVC cement and magnetic tape. Due to its' tendency to form peroxides during storage, THF is inhibited with BHT.