products in Other Adhesives & Sealants Applications

Dynasol Elastomers

Calprene® 700

Calprene 700 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 700 is a BHT* free SBS, especially suitable for food contact and textile contact applications.Calprene 700 offers good mechanical properties and shows a very good yellow index behavior.Calprene 700 is supplied in porous pellets.*(BHT content in pure polymer less than 30ppm).

DOG Chemie

Homogenizers 501

Dog Chemie Homogenizers 501 is aromatic C9 hydrocarbon resins. C9 hydrocarbon resins are versatile in use and widely compatible with various polymers. Major application areas are hot melts, printing inks, paints and solvent based adhesives. Due to their aromatic structure, C9 hydrocarbon resins are more compatible with polar elastomers than a C5 resin.

Dynasol Elastomers

Solprene® 416

Solprene 416 is a radial styrene/butadiene block copolymer having 30% of styrene content, most of it forming a polystyrenes block which gives the polymer a thermoplastic behavior. It develops properties of vulcanized rubber yet not requiring vulcanization.It is protected with a non staining antioxidant system; FDA approved, suitable for food contact applications and is essentially gel free with a clear color.Solprene 416 is used as elastomeric modifier for asphalt and plastics, as ingredient of soling formulations and as base for pressure sensitive adhesives.

Munzing

TAFIGEL® PUR 56

TAFIGEL® PUR 56 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL® PUR 56 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL® PUR 56 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

Munzing

TAFIGEL® PUR 44

TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

Dynasol Elastomers

Solprene® 4301

Solprene 4301 is a linear block copolymer of styrene and butadiene, having 33% of styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a clear color.Solprene 4301 is used as compounding ingredient for adhesives, as impact modifier for plastics and as elastomeric modifier for asphalt mixtures used in paving and roofing.

IGM Resins

Photomer 4250

PHOTOMER® 4250 is a 100% active, multifunctional amine acrylate. This product is primarily used in place of free amines. PHOTOMER® 4250 offers an excellent way to increase system cure speeds, while minimizing amine migration and ink burn-out.

Pan Technology Inc.

PanTINT® 70W249

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Kolon Industries

HIKOTACK® P-90

Kolon Industries HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Dynasol Elastomers

Calprene® H6140

Calprene H6140 is a 69/31 ethylene-butylene/styrene ther-moplastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance.This product is available in: - Calprene H6140 porous crumbs. - Calprene H6140 P powder form dusted WITH amorphous silica. - Calprene H6140 PH powder form WITHOUT any dusting agent.

Munzing

AGITAN® 701

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.

IGM Resins

Photomer 4012

PHOTOMER® 4012 (IBOA) is a very low viscosity monofunctional acrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

Oltchim

PETOL® 400-3

PETOL 400-3 is a polyoxypropylene triol, 420-average molecular weight. It is a low viscosity polyol used in polyol blends for rigid polyurethane foam applications. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. PETOL 400-3 is also used in the production of adhesives and coatings.

CLiQ SwissTech

CLiQFLOW® 535

CLiQFLOW® 535 is highly efficient liquid hydrophobically modified alkali swellable acrylic thickener (HASE) for aqueous systems. The rheological additive is designed to provide amore balanced and advanced flow behavior than standard cellulosic and acrylic thickenersin e.g. emulsion paints, plasters and adhesives.

Munzing

AGITAN® 731

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

Dynasol Elastomers

Emulprene™ 1012CR

Emulprene 1012CR is a crumb version of a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Thiele Kaolin Company

Thiele Kaolin Company EG-44

Thiele Kaolin Company EG-44 is a filler clay from East Georgia that exhibits superior color compared to other pigments that are too yellow. With its fine particle size and high surface area, EG-44 can be used in paper, adhesives, and other building-type products.

Kolon Industries

HIKOTACK® P-90S

Kolon Industries HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

JSR Corporation

Techno Polymer JSR TR2787

JSR TR287 (Styrene Butadiene Thermoplastic Elastomer) is used as asphaltModifiers and adhesives.

HPL Additives

KINOX 68

KINOX 68 is for good processing stability, white, free flowing crystalline powder/granules.

IGM Resins

Photomer 4356

PHOTOMER® 4356 is a tri-functional acrylated monomer which can be polymerised in the presence of free radicals. This monomer is typically designed for use in UV- and EB curable applications. PHOTOMER® 4356 offers high reactivity, high cross linking density and excellent scratch, abrasion water and chemical resistance and good heat resistance combined with low shrinkage properties and none yellowing properties

GEO Specialty Chemicals Inc

DMPA®

DMPA® Dimethylolpropionic Acid is a unique and versatile hindered diol molecule with both hydroxyl and carboxyl functionality.

Dynasol Elastomers

Solprene® 4302

Solprene 4302 is a linear block copolymer of styrene and butadiene, having 31% of styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a clear color.Solprene 4302 is used as an ingredient for adhesives formulation, as an impact modifier for plastics and as elastomeric modifier for asphalt mixtures used in paving and roofing.

Dynasol Elastomers

Paracril™ CJLT

Paracril CJLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Yuron New Material

Yuron New Material Chlorinated Rubber(CR)-170

Yuron New Material Chlorinated Rubber(CR)-170 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

GEO Specialty Chemicals Inc

Bisomer® PEG200DMA

Bisomer® PEG200DMA is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance.

Sasol

Sasol AES 270N-II

AES 270N-II is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products. It is used in personal care as base surfactant exhibiting a high foaming power. It is used for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sanyo Chemical America Incorporated

UMEX 100TS

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

AB Specialty Silicones

Andisil® OH 20,000

Andisil® OH 20,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

The International Group Inc

Evacote® 7089A

EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications.

The International Group Inc

Astorlite® J50

ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar/container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar/container candles can be made with a single filling with no top-off necessary.

Bomar Specialties LLC

Bomar Oligomers® BRC-843S

Bomar™ BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, coatings & inks for steel, plastic, glass and medical device.

Minerios Ouro Branco

Minerios Ouro Branco Magnesium Silicate

Minerios Ouro Branco Magnesium Silicate is known as talc, a mineral of inorganic constitution, chemically inert, extracted from deposits and processed in different granulometric ranges according to the desired application. It is presented in lamellar crystalline form, giving the mineral softness to the touch. Magnesium Silicate is White powder until slightly creamy or grayish, fine, odorless, insoluble in water.

Industrial Raw Materials

Indramic 91-G

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

Dynasol Elastomers

Emulprene™ 1500A

Emulprene 1500A is a styrene-butadiene copolymer, cold polymerized using a rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

Sapici Spa

POLURGREEN PRP 450 01

POLURGREEN PRP 450 Olis a polyether based prepolymer with high elongation andgood modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 450 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.