products in Case & Carton Sealing

Munzing

AGITAN® 526

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Munzing

AGITAN® 299

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

Kraton

UNI-REZ™ 2940

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

Kraton

SYLVALITE™ RE 105XL

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

Kolon Industries

HIKOREZ® C-1100

Kolon Industries HIKOREZ® C-1100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. And, this grade shows reinforced adhesive strength in the pressure sensitive adhesives because of its higher molecular weight compared to HIKOREZ® A-1100. .

Kolon Industries

SUKOREZ® SU-490

Kolon Industries SUKOREZ® SU-490 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-490 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Kraton

SYLVATAC™ RE 25

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Kraton

UNI-REZ™ 2727

UNI-REZ 2727 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2727 hot melt polyamide adhesive has excellent heat and chemical resistance.

Kraton

SYLVALITE™ RE 100S

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Kolon Industries

SUKOREZ® SU-500

Kolon Industries SUKOREZ® SU-500 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-500 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kolon Industries

SUKOREZ® SU-420

Kolon Industries SUKOREZ® SU-420 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-420 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Kolon Industries

SUKOREZ® SU-100

Kolon Industries SUKOREZ® SU-100 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-100 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Munzing

AGITAN® 108

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

Munzing

AGITAN® 280

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

Kolon Industries

SUKOREZ® SU-625

Kolon Industries SUKOREZ® SU-625 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-625 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Munzing

AGITAN® DF 6120

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

Kolon Industries

HIKOREZ® T-3100

Kolon Industries HIKOREZ® T-3100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). HIKOREZ® T-3100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Munzing

AGITAN® DF 999

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

Valpac

Valpac V-TAC 7901

V-TAC™ 7901 dispersion is an aqueous, 53% solids, solvent-free anionic hybrid dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, polychloroprene and natural rubber. V-TAC™ 7901 enhances adhesion and is especially recommended for acrylic latex systems. V-TAC™ 7901 offers an excellent balance of adhesion for polyolefin substrates and recycled corrugated.

Kraton

UNI-REZ™ 2641

UNI-REZ 2641 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2641 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

Kraton

UNI-REZ™ 2223

UNI-REZ 2223 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kraton

UNI-REZ™ 2720

UNI-REZ 2720 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2720 hot melt polyamide adhesive offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.

Kraton

UNI-REZ™ 2638

UNI-REZ 2638 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2638 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

Wacker Chemie AG

VINNAPAS® EP 705A (ULS)

VINNAPAS® EP 705A (ULS) is a vinyl acetate-ethylene copolymer specifically designed as a base polymer for high-performance adhesives. It is produced without using formaldehyde donors. The low viscosity of VINNAPAS® EP 705A (ULS) and its excellent Newtonian flow behavior make it well-suited for high-speed packaging machines.

Wacker Chemie AG

VINNAPAS® EP 6411

VINNAPAS® EP 6411 is an aqueous dispersion containing a 50% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product offers good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

Wacker Chemie AG

VINNAPAS® 315

VINNAPAS® 315 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +17 °C, which contributes to its exceptional heat resistance and high tensile strength. Specifically formulated as a base for high-speed packaging adhesives, VINNAPAS® 315 demonstrates remarkable wet tack and thickening responses. Its poly(vinyl alcohol) stabilization and impressive mechanical stability ensure smooth machining and enable its utilization in various roll, extruder, or spray applications.

Wacker Chemie AG

VINNAPAS® 320 KR (ULS)

VINNAPAS® 320 KR (ULS) is a vinyl acetate-ethylene copolymer that offers versatility to formulators in the compounding of water-resistant and high-speed packaging adhesives. It provides good adhesion to a wide range of plastic surfaces and forms permanently flexible adhesive joints with high cohesion.

Wacker Chemie AG

VINNAPAS® EP 6420

VINNAPAS® EP 6420 is an aqueous dispersion containing a 55% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product provides good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

Wacker Chemie AG

VINNAPAS® 323

VINNAPAS® 323 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of +23 °C. It is specifically developed as a fast-setting and high-heat-resistant dispersion, offering compatibility with fully hydrolyzed PVOH. VINNAPAS® 323 is designed as a base for high-speed packaging applications. It demonstrates excellent wet tack, fast setting properties, and a moderate response to plasticizer thickening.

Wacker Chemie AG

VINNAPAS® 400 H

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

Wacker Chemie AG

VINNAPAS® EP 710

VINNAPAS® EP 710 is a high-viscosity vinyl acetate-ethylene copolymer dispersion that is characterized by its low formaldehyde and low free VAM residue content. It exhibits good machinability and strong wet tack. VINNAPAS® EP 710 provides enhanced adhesion to films, particularly polyvinyl chloride. Additionally, it demonstrates high-viscosity thickening responses to plasticizers and solvents.

Wacker Chemie AG

VINNAPAS® EP 706

VINNAPAS® EP 706 is a vinyl acetate-ethylene-based copolymer that is produced without the use of formaldehyde donors. It offers good machinability and strong wet tack, providing enhanced adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706 exhibits very high plasticizer and solvent viscosity thickening responses.

Wacker Chemie AG

VINNAPAS® EP 706K (ULS)

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

Wacker Chemie AG

VINNAPAS® EP 760

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

Wacker Chemie AG

VINNAPAS® EP 756

VINNAPAS® EP 756 is a vinyl acetate-ethylene copolymer dispersion with a low viscosity and low levels of formaldehyde and free VAM residue. It demonstrates excellent machinability and strong wet tack. Additionally, it offers good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints with high cohesion.

Wacker Chemie AG

VINNAPAS® EP 705K (ULS)

VINNAPAS® EP 705K (ULS) is a vinyl acetate-ethylene copolymer that is protected with PVOH. It has a moderate viscosity and is produced without the use of formaldehyde donors. The polymer's backbone provides the dried adhesive film with toughness and flexibility, which remain even when exposed to water immersion and temperature fluctuations.