products in Agricultural Films

Petro Rabigh

ETHYLENE PROPYLENE RUBBER (EPR/EPDM) 512E

ETHYLENE PROPYLENE RUBBER (EPR/EPDM) 512E is a semi-crystalline rubber with medium molecular weight and high ethylene content, shows high green strength of uncured rubber and also its compound provides outstanding physical properties, also has its polymer design suited for the extrusion process. Excellent processability and articles with good shape retention are promised. 512EF is the same specification of 512E but 512EF is Friable Bale of 512E.

Arlon Electronic Materials

Arlon® 1000

Greene, Tweed's Arlon® 1000, a tough, hig temperature, semi-crystalline thermoplastic, offers a unique combination of mechanical, thermal and chemical propertier. Arlon 1000 features superior compressive strength and minimum creep, as well as broad chemical resistance. Arlon is an excellent choice for applications such as valve seats and bushings greater abrasion resistance and lower wear and better fatigue properties than other thermoplastics.

NuSil Technology

NuSil™ MED-4815

NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

Samyang Corporation

TRIBIT® 1500GN15

TRIBIT® 1500GN15 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Braskem America

UTEC® 3041

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Braskem America

UTEC® 3040

Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

VYNOVA

VYNOVA™ S6830

VYNOVA™ S6830 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.

Greene Tweed

XYFLUOR® 860

Xyfluor® 860, a highly fluorinated elastomer compound, offers excellent chemical compatibility over a wide range of temperatures from -76°F to 450°F (-60°C to 232°C). Recommended for applications requiring a combination of low temperature properties and chemical resistance, Xyfluor's capabilities surpass those of standard fluoroelastomers, PTFE and graphite. Addtionally, Xyfluor reduces overall cost by extending equipment service life.

Prime Polymers

Evolue® H SP5505

Prime Polymers Evolue® H SP5505 is a High Density Polyethylene product. It can be processed by pipe extrusion and is available in Asia Pacific, Europe, or North America.

Phillips66

Copylene® CH005

COPYLENE® CH005 is a fractional melt flow polypropylene homopolymer resin available in pellet form. It is made with a non-phthalate catalyst.

Precision Polymer Engineering

Perlast® G75TX

Description Perlast® G75TX is the ultimate ‘next generation' perfluoroelastomer, offering a combination of excellent chemical resistance and ultra-high temperature stability, simultaneously extending the operating limits in all aspects.Perlast® G75TX has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in- service performance in, for example, valves, pumps and mechanical seals.Perlast® G75TX is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft external diameter) and custom shapes.Key Attributes Very high temperature resistance Ultra low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperatures Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

SCG Chemicals

SCG Chemicals WD2040P

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Momentive Performance Materials

LIM™ 6045

Precision Polymer Engineering

Perlast® G80A

Perlast® G80A uses a unique molecular cross-linking technology to offer the broadest range of chemical resistance of any FFKM with the ability to operate up to a maximum temperature of 260°C (500°F).An extremely versatile material, Perlast® G80A is suitable for 90% of sealing applications encountered in the chemical processing and refining industries, providing excellent resistance to highly aggressive acids, amines, chlorine and solvent-based chemistries.

Precision Polymer Engineering

Precision Polymer™ V71C

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications.V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance.V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold (Arctic) operating environments Mechanical seals Flow meters & sensors Seal applications that are exposed to cold situations or high temperature variations.

Precision Polymer Engineering

Perlast® G76W

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers

Saint-Gobain

Exac™ ECTFE

Exac ECTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Exac ECTFE include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA)

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Precision Polymer Engineering

Perlast® G70H

Description Perlast® G70H provides optimal performance in high-temperature, chemically and mechanically demanding environments. This highly reinforced material offers extended seal life, offering low plasma etch rates in flat panel and thin-film solar CVD processes and the high mechanical strength needed to cope with the high forces repeatedly applied in these large scale applications.Perlast® G70H is available as fully molded O-rings (any size up to 2m/6.5ft internal diameter) and fully molded formed slit valve door seals up to 3m in length for generation 10 and above.Key Attributes Excellent plasma resistance High temperature performance High mechanical strength High abrasion resistance Extremely low out-gassing properties Typical Applications Slit valve door seals ISO valve seals Load lock seals NW / KF / ISO O-rings

Precision Polymer Engineering

Precision Polymer™ V70SW

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Osterman & Company Inc.

Osterlene® HB1049

Osterman & Company Inc. Osterlene® HB1049 is an extra high molecular weight hexene copolymer. It has good melt strength, good rigidity, excellent stress crack resistance and excellent impact strength even at low temperatures.HB1049 is excellent for large part molding applications.Recommended applications for HB1049 include blow molding large shipping containers, agricultural chemical tanks and gasoline tanks. Extruded applications would include pallets, cattle feeders, large formed parts and boats.Osterlene HB1049 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Natrochem

Plasticizer SC DLC-A

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Greene Tweed

Chemraz™ XPE

Protection against oxygen-infused plasma is key in many etch chamber environments. These harsh environments often breakdown non-resistant materials, causing harmful particulation and, ultimately, defective chips.Greene, Tweed's Chemraz® XPE is highly resistant to O2 plasma and can be used in a wide range of applications, such as slit valve doors, reaction chamber lid seals, and gate valve seals. This advanced elastomeric material offers the semiconductor and solar industry an alternative to legacy products that quickly erode in the oxygen environment. With excellent resistance to both 02 and CF4 plasmas, this material affords an increased chip yield and maximized production. In addition, XPE seals provide customers with an increased MTBR (mean time between repair) to reduce downtime and maintenance costs.

Daelim Industrial

Daelim Industrial XP9200EN

Daelim Po1y® 9200EN is a Commercialized for the first time in Korea by applying proprietary metallocene catalyst technology Excellent mechanical and optical properties compared to general LLDPE. Application of proprietary metallocene catalyst technology.

KW Plastics

KW Plastics KWR621-20 FDA

KW Plastics KWR621-20 FDA is a Copolymer Polypropylene, Post-Consumer Resin.

DIC Corporation

DIC.PPS® Z-650

Outline: Z-650 is a glass fiber and mineral filled super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance with improved dimensional stability. Color: Black

Braskem America

Braskem Inspire 114

Braskem Inspire® 114 EU polypropylene impact copolymer is a propylene based resin very suitable for extrusion applications including blown films, sheets, profiles, pipes and blow molded containers. Inspire® 114 EU Performance Polymer has an excellent balance of high stiffness and impact resistance, even at low temperatures. Inspire® 114 EU Performance Polymer combines outstanding mechanical proper es with superior processability due to its high melt strength delivering improved sag properties compared to conventional polypropylenes.

ELIX Polymers, S.L.

Elix™ ABS H604

Improved heat, chemical and dynamical resistance. Major Benefits: Low emission; Medium heat resistance; Chemical resistance. Typical Applications: Mirror housing, Door components, Instrument panel parts, Pipes & fittings.

VYNOVA

VYNOVA™ S5702

VYNOVA™ S5702 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering and injection blow molding of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, foam core pipes and pipe fittings, injection moldings, including housing, and bottles.

Ela Kimyevi Maddeler

ELAFLEKS® DOTP (Dioctyl Terephthalate)

Elafleks® DOTP (Dioctyl Terephthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC floor cloth production, production of goods not containing phthalate (toy sector, bookbinding fabric production, production of some hoses, table cloth, etc.), PVC door mat production, tarpaulin production.

Precision Polymer Engineering

Perlast® G75S

Perlast® G75S has been specifically developed to cope with a wide range of process media, potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. G75S is also suitable for other critical applications such as Water-For-Injection (WFI) systems.Perlast® G75S is an all round material that can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Unlike other FDA compliant elastomers, Perlast® G75S is thermally stable at higher temperatures, and is ideal for use in applications which require exposure to temperatures up to 310°C (590°F) making it suitable for use in Stage II Sterilization processes.Perlast® G75S is suitable for both dynamic and static applications and can be molded into O-rings and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Superior mechanical properties High elongation at break assists installation High tensile strength makes G75S ideal for dynamic applications Excellent steam resistance (ASME BPE 2000) FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI) Typical Applications Dynamic seals Static seals

Petkim

Petkim PETILEN G03-5

PETILEN G03-5 is a low density polyethylene resin produced by high pressure autoclave process. The product has broad molecular weight distribution and low melt flow rate. Developed for general purpose applications, PETILEN G03-5 contains no additives.

Greene Tweed

Chemraz™ XCD

Chemraz XCD is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XCD include engineering/industrial parts and sealing applications.Characteristics include: Heat Resistant High Purity

Vatan Plastik San. Tic. AS

Vatan Plastik San. Tic. AS V200

Vatan Plastik San. Tic. AS V200 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Samyang Corporation

TRIBIT® 1503S

TRIBIT® 1503S is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

BARLOG plastics GmbH

Kebaflex® P D35.1

Polyester elastomer, Shore D35