products in Aftermarket Parts & Components

Envalior

Stanyl® TW200F3

Stanyl® TW200F3 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound RX05050

SABIC's Specialties Business LNP LUBRICOMP RX05050 compound is based on Nylon 6/6 resin containing 10% PTFE, 10% aramid fiber and 10% carbon fiber. Added features of this grade include: Electrically Conductive, Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound RL4040HSUV

SABIC's Specialties Business LNP LUBRICOMP RL4040HSUV compound is based on Nylon 6/6 resin containing 20% PTFE. Added features of this grade include: Heat Stabilized, UV Stabilized, Wear Resistant.

SABIC's Specialties Business

NORYL GTX™ Resin GTX202

SABIC's Specialties Business NORYL™ GTX202 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits excellent chemical resistance and excellent paintability.

Envalior

Stanyl® TW341

Stanyl® TW341 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.

SABIC's Specialties Business

NORYL™ Resin NHP6012

SABIC's Specialties Business NORYL™ NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL™ NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound RAL23

LNP LUBRICOMP RAL23 compound is based on Nylon 6/6 resin containing 15% aramid fiber, 10% PTFE. Added features of this grade include: Wear Resistant.

MOCOM Compounds

Alcom® PWL 10/1 WT 41-913LB

MOCOM Compounds Alcom® PWL 10/1 WT 41-913LB is an impact-modified polycarbonate designed for use in automotive and lighting applications. It contains 15% special filler that gives it a highly reflective, opaque appearance, making it ideal for light blocking components. It should be stored in a dry area and protected from light.

MOCOM Compounds

ALCOM® LB PC+ABS 1000 19037 RD1036-19

MOCOM Compounds ALCOM® LB PC+ABS 1000 19037 RD1036-19 is an injection molding grade polymer blend of polycarbonate and Acrylonitrile Butadiene Styrene that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for applications such as light guides and reflectors. During processing injection molding, a melt temperature of 250-280°C and mold temperature of 70-100°C should be maintained. After processing, the material should be stored in a dark environment to protect it from light.

MOCOM Compounds

ALCOM® AWL 10/3 WT1308-05LB

MOCOM Compounds ALCOM® AWL 10/3 WT1308-05LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer that is opaque, highly reflective, heat stabilized, and has easy flow. It is suitable for markets such as Automotive and various application areas like lighting and light blocking components. Typical applications include light guides and reflectors.

MOCOM Compounds

ALCOM® LB POM 1000 18008 WT1005-18

MOCOM Compounds ALCOM® LB POM 1000 18008 WT1005-18 is a Polyoxymethylene Copolymer with a special filler/additive system that makes it highly reflective and opaque. It is used in Automotive and Lighting market segments for applications such as light guides, reflectors, and light-blocking components. When processed with injection molding, it requires a melt temperature of 190-230°C and a mold temperature of 60-120°C.

MOCOM Compounds

ALTECH® PC A 1000/608 WT1005-17LWA

MOCOM Compounds ALTECH® PC A 1000/608 WT1005-17LWA is a polycarbonate injection molding grade with laser optimization, easy release (demolding), good flow, and processing stabilized special features. It is used in the automotive, electrical, and electronic market segments, typically in lighting and electrical components applications. Pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%. Processing injection molding should be done with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds

ALCOM® PC 740/4.19 WT1302-05LB

MOCOM Compounds ALCOM® PC 740/4.19 WT1302-05LB is a polycarbonate base polymer containing a special filler/additive system with high reflectivity, opacity, and easy flow. It is suitable for applications in the automotive and lighting industry such as light guides, reflectors, and light blocking components. It should be processed using injection molding with a melt temperature of 280-320°C and a mold temperature of 80-110°C. For optimal results, it should be stored in a dry place, away from light, and protected from moisture.

MOCOM Compounds

ALCOM® LB ABS 1000 15018 WT1029-15

MOCOM Compounds ALCOM® LB ABS 1000 15018 WT1029-15 is a pre-dried acrylonitrile/butadiene/styrene/copolymer containing a special filler, designed for highly reflective and opaque automotive and lighting components such as light guides and reflectors. It should be processed with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content should not exceed 0.02%.

MOCOM Compounds

ALCOM® AWL 109/15 UV WT1217-11LB

MOCOM Compounds ALCOM® AWL 109/15 UV WT1217-11LB is a base polymer of acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing 15% special filler and special features of being highly reflective, opaque, UV stabilized, and highly heat stabilized. It is intended for use in the automotive and various market segments, primarily for lighting and light blocking components such as light guides and reflectors.

MOCOM Compounds

ALCOM® AWL 15/1 UV WT1471-04LB

MOCOM Compounds ALCOM® AWL 15/1 UV WT1471-04LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of 15% special filler. It is highly reflective, opaque, and UV stabilized, used in the automotive and lighting markets for applications such as light guides and reflectors. Processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C. This product should be stored in a dry, light-protected environment.

MOCOM Compounds

ALCOM® AWL 10 WT1308-05LB

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds

ALCOM® LB PC 1000 15022 WT1037-15

MOCOM Compounds ALCOM® LB PC 1000 15022 WT1037-15 is a polycarbonate base polymer with a special filler/additive system that features high reflectivity and opacity, as well as easy flow. It is used in automotive and lighting market segments for light guides, reflectors, and light blocking components. For processing injection molding, the melt temperature should be between 280-320°C and the mold temperature should be between 80-110°C. The material should be stored in a cool, dry place to ensure optimal performance.

MOCOM Compounds

ALCOM® PWL 10/1 WT1130-09LB

MOCOM Compounds ALCOM® PWL 10/1 WT1130-09LB is a polycarbonate base polymer containing 15% special filler which is highly reflective and opaque and is impact modified. It is suitable for applications such as light guides and reflectors and can be used in the automotive and various market segments. For injection molding, a melt temperature of 280-320°C and a mold temperature of 80-110°C is recommended. Additionally, pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-4 hours, 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of <0.02%.

MOCOM Compounds

TEDUR® L 9560

MOCOM Compounds TEDUR® L 9560 is a Polyphenylene Sulfide base polymer with a 50% mineral filler/additive system that offers improved surface appearance and high surface gloss. It is used for injection molded parts in the automotive and machinery market segments and typical applications include reflectors. For best results, pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content, followed by processing injection molding with melt temperature 320-340°C and mold temperature greater than 140°C.

MOCOM Compounds

ALCOM® PC 740/40 FR UV WT1182-10LB

MOCOM Compounds ALCOM® PC 740/40 FR UV WT1182-10LB is a polycarbonate base polymer with a special filler/additive system that is chlorine and bromine free, UV stabilized, and opaque, highly reflective. It is suitable for applications such as lighting, light blocking components, and domestic appliances, and is typically used for light guides, reflectors, and housings.

MOCOM Compounds

ALCOM® PC740/26 UV WT1407-04LB

MOCOM Compounds ALCOM® PC740/26 UV WT1407-04LB is a high heat polycarbonate base polymer with a special filler/additive system that is UV stabilized and highly reflective, opaque, and easy to flow. It is suitable for automotive and lighting applications such as light guides, reflectors, and light blocking components. During processing injection molding, the melt temperature should be between 330-340°C and the mold temperature should be between 120-140°C.

MOCOM Compounds

ALCOM® PA6 900/1 GF30 WT1165-10LB

MOCOM Compounds ALCOM® PA6 900/1 GF30 WT1165-10LB is a polyamide 6 base polymer filled with 30% glass fibers, featuring a highly reflective, opaque, and slip agent property. It is suitable for automotive, various lighting, light blocking components, and interior decoration/finishing applications such as light guides, reflectors, and handles. The recommended melt temperature range for processing injection molding is 270-290°C, and the mold temperature range is 80-100°C.

MOCOM Compounds

TEDUR® L 9560 S

MOCOM Compounds TEDUR® L 9560 S is a Polyphenylene Sulfide injection molding grade with 50% mineral filler/additive system. It has improved surface appearance, high surface gloss, and is metallizable. Pre-drying conditions include drying in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content at 130-140°C. Processing injection molding requires a melt temperature between 320-340°C and a mold temperature above 140°C. Typical applications include reflectors for automotive, lighting and consumer products.

MOCOM Compounds

ALCOM® LB PA6 2015 14041 WT1063-16

MOCOM Compounds ALCOM® LB PA6 2015 14041 WT1063-16 is a polyamide 6 with 15% glass fibers and 8% special filler. It has a high reflectivity, opacity, and is equipped with a slip agent and heat stabilizer. It is used in the automotive, electrical and electronic, and lighting industries for lighting, interior decoration/finishing, and light blocking components such as light guides, reflectors, and handles.

MOCOM Compounds

ALCOM® PC+AWL 750/15.1 WT1378-04LB

MOCOM Compounds ALCOM® PC+AWL 750/15.1 WT1378-04LB is a polycarbonate + acrylonitrile butadiene styrene blend with a special filler that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for lighting and light blocking components such as light guides and reflectors. The pre-drying conditions should include a dry air (dessiccant) dryer at 100-110°C for 2-4 hours, and an air circulating dryer at 100-110°C for 4-8 hours, with a maximum moisture content of <0.02%.

MOCOM Compounds

ALCOM® PP 620/1 WT1433-05LB

MOCOM Compounds ALCOM® PP 620/1 WT1433-05LB is a polypropylene homopolymer with 8% special filler, 30% mineral, and highly reflective, opaque features. It is used in the automotive and lighting market segments for light guides, reflectors, and light blocking components. The processing for injection molding is done at a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds

ALCOM® AWL 15/1 WT31-956LB

MOCOM Compounds ALCOM® AWL 15/1 WT31-956LB is a pre-dried acrylonitrile/butadiene/styrene/copolymer that contains a 15% special filler system, designed for automotive and various applications such as lighting and light blocking components, like light guides and reflectors. It has a high reflectivity and opacity. For injection molding, a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used, and the maximum moisture content should not exceed 0.02%.

MOCOM Compounds

Alcom® LB PC 1000 14073 WT1164-14

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds

ALCOM® AWL 109/10 WT1218-11LB

MOCOM Compounds ALCOM® AWL 109/10 WT1218-11LB is a base polymer - acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing a filler/additive system of 10% special filler and special features of being highly reflective, opaque, and highly heat-stabilized. It is suitable for use in the automotive and various market segments, primarily for use in lighting and light-blocking components such as light guides and reflectors.

MOCOM Compounds

ALCOM® LB PC 1000 16061 GY1068-16

MOCOM Compounds ALCOM® LB PC 1000 16061 GY1068-16 is a polycarbonate base polymer with a special filler/additive system that is highly reflective and opaque. It is used in the automotive and lighting market segments for lighting and light blocking components, such as light guides and reflectors. It is processed with injection molding using a melt temperature of 280-320°C and a mold temperature of 80-110°C.

MOCOM Compounds

ALCOM® LB PC 5015 TF 17116 WT1106-17

MOCOM Compounds ALCOM® LB PC 5015 TF 17116 WT1106-17 is a polycarbonate base polymer with a 15% special filler and special features of being highly reflective, opaque, UV stabilized, and improved sliding/wear. It is used in the automotive and lighting market segments, primarily for light guides, reflectors, and light blocking components. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, 120°C in an air circulating dryer for 4-12 hours, and a maximum moisture content of 0.02%. For processing in injection molding, the melt temperature should be between 280-310°C and the mold temperature should be between 80-110°C. No extra sentence is needed.

MOCOM Compounds

ALCOM® LB PA6 2015 14041 GF15 WT1100-14

MOCOM Compounds ALCOM® LB PA6 2015 14041 GF15 WT1100-14 is a polyamide 6 base polymer filled with 15% glass fibers and a special filler, providing high stiffness and highly reflective, opaque properties. It is used in the Automotive and Lighting Market segments, with typical applications being reflectors and light blocking components. For processing via injection molding, the melt temperature should be 270-290°C and the mold temperature should be 80-100°C.

MOCOM Compounds

ALCOM® PC+AWL 750/20.1 WT1407-04LB

MOCOM Compounds ALCOM® PC+AWL 750/20.1 WT1407-04LB is a Pre-Drying Conditions Polymer Blend composed of a Base Polymer of polycarbonate + Acrylonitrile Butadiene Styrene, and a Filler/Additive System of 20% special filler. It is highly reflective and opaque and is used in the Market Segment of Automotive, electrical and electronic, Lighting. Typical Applications include light guides, reflectors, lighting, and light blocking components. It is processed through Injection molding with a melt temperature of 250-280°C and a mold temperature of 70-100°C.

MOCOM Compounds

ALCOM® LB PC+ABS 1000 18079 RD1094-18

MOCOM Compounds ALCOM® LB PC+ABS 1000 18079 RD1094-18 is a pre-drying conditions injection molding grade, highly reflective, opaque and suitable for automotive, various, and lighting, light blocking components, various markets. The recommended pre-drying conditions are in a dry air (dessiccant) dryer 100-110°C for 2-4 hours or in an air circulating dryer 100-110°C for 4-8 hours with a maximum moisture content of less than 0.02%. The recommended processing injection molding parameters are a melt temperature of 250-280°C and a mold temperature of 70-100°C.

MOCOM Compounds

ALCOM® PBT 700/2 WT31-956LB

MOCOM Compounds ALCOM® PBT 700/2 WT31-956LB is a Polybutylene Terephthalate base polymer with a special filler/additive system that provides high stiffness and a highly reflective, opaque finish. It is used in the automotive and various other market segments for applications such as lighting, light blocking components, light guides, and reflectors. It can be processed for injection molding with a melt temperature of 250-270°C and a mold temperature of 80-120°C. For optimal performance, it should be stored in a dry and light-protected environment.