products in Chassis & Brake

Sumitomo Bakelite Company

Durez™ 31735

Zoltek

ZOLTEK™ PX30 FABRIC SW08

ZOLTEK PX30 Woven Carbon Fabrics tailorability results from controlling the yield on rovings and yarns, and allows for a variety of finished composite thicknesses. The spun yarns have many surface fibrils that protrude in various directions at various lengths from the surface. This fiber loft contributes to high cross-ply tensile and interlaminar shear strengths for 2-D composite materials. Contour conformation without wrinkling is another advantage of spun yarn fabrics. ZOLTEK PX30 materials undergo high temperature carbonization process, involving a long temperature soak time, resulting in a very thermally stable and chemically pure fabric with low oxidation rate.

Hexcel

HexPly® 250

HexPly® 250 is a phenolic matrix widely used in honeycomb sandwich components for aircraft interior furnishings. The low smoke and low toxicity properties of 250 during ignition meet the requirements of FAR 25 and ATS 1000. HexPly® 250 prepreg is available in fabric reinforcements and single tows.

Era Polymers

ERAPOL CC5-65

Erapol CC5-65 is a premium grade polyether (PTMEG) based cold castable polyurethane elastomer. The product is free from MOCA (methylene bis-ortho chloroaniline) and flammable solvents, which produces an elastomer with outstanding toughness, high elongation and abrasion resistance. It offers advantages in that it can be readily processed and cured at room or elevated temperatures. The convenient mix ratio and low viscosity allow for easy processing.

Nippon A&L

KRALASTIC GA-501

KRALASTIC GA-501 is a high impact resistance ABS resin standard grade.

Lion Elastomers

Royalene® 510

A High Ethylene Polymer with Good Green Strength for Wire and Cable and Extruded Profiles

Quantum Composites

Lytex® 4149

Lytex® 4149 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

Polyumac

Polyumac Air-Cell T-60

Polyumac Air-Cell T-60 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Polyumac

Polyumac Stru-Cell Structural PVC P100

Polyumac Stru-Cell Structural PVC P100 is a high performance PVC foam core that sets the standard for sandwich composite structures. As well as its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures and its closed-cell construction means that it does not absorb water.

SHD Composites

SHD Composites MTC275

MTC275 is an epoxy resin system designed to give excellent clarity and surface finish out of autoclave. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

BARLOG plastics GmbH

Kebaflex® SG 40 A.01 black

TPE-S, Shore A40, black

Zoltek

ZOLTEK™ PX35 VINYL ESTER COMPATIBLE TOW

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

Toray

Toray E745

Toray E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural Applicationss. E745 can be impregnated into a range of fiber and fabric types. 135°C (275°F) Cure Mid Temperature Curing Toughened Epoxy Component Prepreg.

Polynt Group

RECarbon® 90CFP40-400gr

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

BARLOG plastics GmbH

Kebaflex® / SG 80 A.05

TPE-S, Shore A80

Toray

Toray AmberTool® HX50

Toray Toray AmberTool® HX50 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX50 achieves an excellent surface finish for small to medium sized autoclave tooling. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.

Hexcel

HexPly® F155

HexPly® F155 is a Resin Systems for Advanced Composites

Hexcel

HiMax™ FCIM151-HD

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Polynt Group

POLYCOR® 944

POLYCOR® 944 - Light stabilized accelerated isophthalic gel coat base with medium reactivity.

Toray

Toray Cetex® TC960

Toray Toray Cetex® TC960 is a polypropylene-based thermoplastic uni-directional tape. It is part of Toray’s CFRT® (continuous fiber reinforced thermoplastic) line of industrial thermoplastic composites. This thermoplastic composite is designed for Applicationss that require high impact resistance, but where cost is a factor. The impact toughness of glass fiber/ polypropylene composites make them ideal for use in truck bodies, vehicles, and vehicle enclosures. Polypropylene Thermoplastic Composite. Indefinite at 25°C (77°F).

Zoltek

ZOLTEK™ PX35 MILLED CARBON FIBERS

ZOLTEK’s PX35 Milled Fibers are specifically processed PAN (polyacrylonitrile) based fibers for lower cost applications. ZOLTEK PX30 High Purity Milled Fibers are 99+% pure carbon fibers derived from ZOLTEK’s high temperature batch graphitization process. All ZOLTEK milled products are free of any sizings. ZOLTEK’s in-house milling system ensures product quality and traceability from raw material through finished product.

Zoltek

ZOLTEK™ PX35 UD200

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Zoltek

ZOLTEK™ PX35 P/TW28-50

ZOLTEK PX35 Tow Weave Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Quick composite part build-up is cost effectively achieved with our cosmetically attractive carbon fiber fabrics. Applications include large composite tooling parts and esthetically appealing finished composite components.

PENTAC Polymer GmbH

Pentamid™ A GV30 H natural

Pentamid A GV30 H natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

Scott Bader

Crystic® Polyester Resin 272

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Daikin Industries, Ltd.

Polyflon PTFE M-18

Polyflon PTFE M-18, available in powder or solid form, is a white resin known for its good mechanical properties and high melt viscosity. Processed through compression molding, it targets markets in automotive and transportation, electrical and electronics, industrial, and printing and packaging. Applications include bellows, housings, and industrial tanks.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Toray

Toray AmberTool® HX56

Toray Toray AmberTool® HX56 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

Hexcel

HexPly® M26

HexPly® M26 is an advance modified epoxy resin developed for aerospace and industrial markets.Its controlled flow, high peel strength on honeycomb cores and excellent fire behavior give it a cost saving potential for interior and secondary sandwich structures. Combined with HexPly® M25 glass phenolic prepregs, it is qualified to Airbus specifications.

Polynt Group

Polynt Group 10

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

PENTAC Polymer GmbH

Pentamid™ A GV30 H LS natural

Pentamid A GV30 H LS natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

Farsoon Technologies

Farsoon Technologies FS 3300PA

Farsoon Technologies FS 3300PA produces prototype pieces and end-use parts with high mechanical properties and toughness. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

PENTAC Polymer GmbH

Pentamid™ A GV25 H UV natural

Pentamid A GV25 H UV natural is a normal viscosity, high heat stabilized polyamide 66, 25% glass fiber reinforced.

PENTAC Polymer GmbH

Pentamid™ B GV30 H LS natural

Pentamid B GV30 H LS natural is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced, laser markable.

Hexcel

HexPly® 260

HexPly 260 is a phenolic resin developed to meet such F.S.T. (Fire, Smoke, Toxicity) regulations and the 1990 O.S.U. index (65/65), for aircraft interior parts as: side wall panels, floor panel, galleys, ceiling panels and lavatories. HexPly 260 prepreg is available in various fabric reinforcements.

Agiplast

Agiplast Agimid 2496B00

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.