products in Chassis & Brake

PENTAC Polymer GmbH

Pentamid™ B S GV50 H natural

Pentamid B S GV50 H natural is a low viscosity, heat stabilized polyamide 6, 50% glass fiber reinforced.

Oil Center Research

Liquid-O-Ring® 159N00

Liquid-O-Ring® 159N00 offers rust and corrosion additives as well as oxidation inhibitors enhancing the performance of this multi-purpose lithium grease. 159 Machinery Grease resists mechanical shear and is water and washout resistant. 159 Machinery Grease is manufactured with extreme pressure additives for increased load carrying capabilities and anti-wear properties for effective performance under constant high load conditions. It is a great general automotive, industrial, and machinery grease. 159 Machinery Grease is highly recommended as a bearing lubricant.

BARLOG plastics GmbH

Kebaflex® / S 80 A.01

BARLOG plastics GmbH Kebaflex® / S 80 A.01 is a TPE-S, Shore A83, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Polynt Group

SMCarbon® 80CF60-3K

SMCarbon® 80CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group

Polynt Group RIVA 2000AUS

Polynt Group Riva 2000AUS has general purpose, low viscosity. Main applications areas are automotive, marine etc.

Chomarat

C-PLY™ SP TL 150 CT3,4 12K HS

C-PLY™ SP TL150 CT3,4 12K HS is a 150 gsm triaxial spread-tow carbon NCF, 0/+45/-45°, 50 gsm/ply.It is made using 12K HS carbon fiber.The carbon fiber spreading process enables the manufacture of ultra-lightweight plies combined using a hybrid chain/tricot stitch.

Polynt Group

Polynt Group HUP 14/30 RN-1090

Polynt Group HUP 14/30 RN-1090 is generally used in automotive, cosmetics, foundries, peroxides applications.

Polynt Group

NORSODYNE® 3320E

Norsodyne® 3320E - promoted and low styrene emission, low shrinkage, good water resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Zylogelastocomp

Neoplast™ 180 C

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Shandong Fine Chemical Technology

Shandong Fine Chemical Technology DCBS

Shandong Fine Chemical Technology DCBS has better anti-scorch performance of sulfenamide accelerators. The anti-scorch performance and operational safety performance of natural rubber are better than DIBS. Mainly used in the manufacture of tires, belts, shock absorbers.

Hexcel

HiMax™ FGE110

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Best Plastic Management

Best Plastic Management propylene regrind

Best Plastic Management Propylene Regrind is used as a casing material for small electrical appliances, molded parts for household appliances and for body parts (bumpers) and molded parts in the interior of motor vehicles. In the construction sector, it is used for pipes, hot water tanks and garden furniture, tubs, plant Containers.

Golden Cashew

Golden Cashew Nut Shell Liquid Resin0051

Golden Cashew Nut Shell Liquid Resin0051 is a transparent viscous resin with golden color film. It is highly suitable for the surface coating application, where outstanding film properties and very high resistance to water and chemicals are required. Therefore, CNSL Resin is used commonly as a paint raw material due to its high water and chemical resistant property.

Hexcel

HiMax™ XCIM177

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Lehigh Technologies

MicroDyne™ 400

MicroDyne™ 400 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

PENTAC Polymer GmbH

Pentamid™ A GV15 H RC black

Pentamid A GV15 H RC black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, recompound.

National Petrochemical Industrial Company (NATPET)

Teldene® H03BPMP

Teldene® H03BPMP is used as is used as extrusion BOPP films at very high speed with excellent processability, thermoforming, raffia and automotive compounding.

Hexcel

HexPly® M92

HexPly® M92 combines all the key benefits achieved individually with other 125ºC curing epoxy resins, in one new system with no compromise: very good hot-wet performance, high toughness, self-adhesion, fire resistance and long out/tack life. This multi-tasking system has elevated hot wet Tg performance, allowing HexPly® M92 to operate at higher service temperatures, while still benefiting from the lower cost 125ºC cure. HexPly® M92 is available in a wide range of prepreg forms (woven and UD tape).

Fluorseals

fluteck™ K301

fluteck™ K301 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK)

Elastron

TPV - ELASTRON V206.A70.B

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements.

PENTAC Polymer GmbH

Pentamid™ B S GV10 MC20 H2 black

Pentamid B S GV10 MC20 H2 black is a low viscosity, high heat stabilized polyamide 6, 10% glass fiber and 20% mineral reinforced.

PENTAC Polymer GmbH

Pentamid™ A GV35 HYD 1.1 black

Pentamid A GV35 HYD 1.1 black is a normal viscosity, heat and highly hydrolysis stabilized polyamide 66, 35% glass fiber reinforced.

Chomarat

C-PLY™ SP 0/45 75/75 CT3,4 12K HS

C-PLY™ SP 0/45 75/75 CT3,4 12K HS is a 150 gsm biaxial spread-tow carbon NCF, 0/+45°, 75 gsm/ply.It is made using 12K HS carbon fiber.The anisotropic orientation ensures that use of the material weight is optimized according to the direction of the forces exerted on the part to be made.

PENTAC Polymer GmbH

Pentamid™ AB GV30 H black

Pentamid AB GV30 H black is a normal viscosity, heat stabilized polyamide 66+6, 30% glass fiber reinforced.

Nippon A&L

KRALASTIC GA-101

KRALASTIC GA-101 is high rigidity ABS resin standard grade.

Verila Lubricants

VERILA® Li Complex EP 2 PTFE Green

Verila® Li Complex EP 2 PTFE Green is Extremely High Performing Heavy-Duty grease, suitable for premium lubrication of a very wide range of applications, within a wide temperature range, -25 to 160 Celsius. It contains a blend of the finest additives and also PTFE, providing excellent protection of the lubricated parts against wear. The product is providing wonderful oxidation stability, rust and corrosion prevention, extremely high anti-wear effect, excellent water washout resistance and extreme performance even in the most extreme and or shock loads, helping extend bearing life, which means less downtime.

Sekisui Plastics

PIOCELAN™ PIOCELAN S series

PIOCELAN™ PIOCELAN S series is foams combining the rigid and tough properties of expanded polystyrene (EPS) with excellent resistance to shocks, chemicals and abrasion.

Polynt Group

Polynt Group 787-2599

Polynt Group 787-2599 - toughened vinyl ester resin offering improved fracture toughness and crack resistance; unthixed, unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Magni Group

Magni Group Magni 265

Magni 265 is a chrome-free duplex coating engineered for use on vehicle stampings and other structural components. Combining an inorganic zinc- rich basecoat with a high-performance organic topcoat, Magni 265 delivers exceptional corrosion protection on the interior and exterior of these structural components. Since it is applied after fabrication, Magni 265 provides excellent corrosion protection at the weld and heat-affect area. Unlike conventional e-coat, Magni 265 will provide extended field protection, often allowing for use of thinner-gage steel and lighter-weight components.

Hexcel

HiMax™ FGE121

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Ensinger GmbH

TECACOMP PPS TRM XS black 1061043

PENTAC Polymer GmbH

Pentamid™ A GV35 H black

Pentamid A GV35 H black is a normal viscosity, heat stabilized polyamide 66, 35% glass fiber reinforced.

Samyang Corporation

TRIEL® 5401BM

TRIEL® 5401BM is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, or North America. Typical application: Automotive.

IADA SL

IADA SL GIC

IADA GIC is a lubricating grease based on mineral oil and calcium soap with excellent anti-corrosion properties. It is a special calcium grease for passenger cars and commercial vehicle chassis.

Polynt Group

Polynt Group LPMC 14/28 RN-Color

Polynt Group LPMC 14/28 RN-Color is generally used in automotive applications.

Elastron

TPV - ELASTRON V100.A65.B

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.