products in Automotive: Electrical/Electronic Applications

Polyplastics Group

Topas® 8007S-04

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Samyang Corporation

TRIREX® 3025U

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025U is a UV stabilized polycarbonate resin grade which has a low melt viscosity and transparency in combination with superior physical properties. CHARACTERISTICS High ultraviolet(UV) stability High flowability Good impact resistance Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Excellent transparency Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025U resin grade is used in out-door applications such as electric meter cover, window panes, sing board, wind break, signal lamps, and ship lights etc.

Sumitomo Bakelite Company

Durez™ 00118

ELIX Polymers, S.L.

Elix™ ABS P2H-AT

Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.

VYNOVA

VYNOVA™ S7102

VYNOVA™ S7102 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a specialty resin suitable for extrusion, calendering or injection molding of semi-rigid and flexible PVC articles such as: cling films, flexible sheets, pool liners, inflatables, roofing membrane, profiles, cables insulation and sheathings, and flooring.

The Polyolefin Company (TPC)

Cosmoplene® AH561

Samyang Corporation

TRIREX® 3020U(HF)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020U(HF) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020U(HF) resin grade is used for Injection molding products. UV stabilized. Low viscosity. Transparent colors only.

Toray

Amilan® CM3001G-30

Toray Amilan® CM3001G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes automotive. Primary characteristic includes flame rated.

Samyang Corporation

TRIREX® 3020HF

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020HF is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020HF resin grade is designed for injection molding products. High flow viscosity. Transparent colors only.

CP-Polymer Technik

Wellamid® 6600-PA66-GV 20 HWV0CP

CP-Polymer Technik Wellamid® 6600-PA66-GV 20 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

DIC Corporation

DIC.PPS® FZ-1140-D5

Outline: FZ-1140-D5 is a 40% glass fiber reinforced polyphenylene sulfide compound with reduced flash and improved mechanical properties for connector use. Color: Black and Natural (Brown).

Polyplastics Group

Duranex® 531 HS

Polyplastics Group Duranex® 531 HS is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.

Grupa Azoty S.A

Tarnoform® 300 GB2

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Samyang Corporation

TRIREX® 3022L1(I2)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022L1(I2) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022L1(I2) resin grade is used for electric and electronic applications, headlamp lens, food contact materials and etc. Medium viscosity. Transparent colors only.

Samyang Corporation

TRIEL® 5400

TRIEL® 5400 is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, or North America.

Mitsubishi Chemical Group Corporation

METABLEN™ A 3000

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

METABLEN™ S 2030

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Taro Plast

Tarolox™ 10 G4 X0

3D Systems

DuraForm® FR 100

DuraForm® FR 100 is halogen-free flame retardant plastic is suitable for Rapid Manufacturing of Aerospace and consumer products where flame retardancy and reduced smoke toxicity is required.In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today's human environmental safety for many other consumer applications.Applications Aerospace and aircraft cabin, compartment & cargo Computers Business equipment Electrical appliances Telecommunications equipment Building and structural components Transportation Complex, thin-walled ductwork Unmanned air vehicles (UAV's) Housings and enclosures Connectors Consumer goods and sporting products Vehicle dashboards and grilles Bumpers Rapid manufacturing Features Flame retardant Halogen and Antimony free FAR 25.853 (non-drip) compliant UL94 V-0 compliant Low smoke density and toxicity Excellent toughness and with good impact resistance Easy to process No emission of corrosive gasses Meets aerospace smoke density and toxicity requirements Benefits Offers toughness of injection molded plastics Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable custom parts Increase market opportunities through flame retardancy.

Chi Mei Corporation

Wonderlite® PC-110V

WONDERLITE® PC-110V is a Polycarbonate (PC) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant

Toray

Toyolac® 700-314

Toray Toyolac® 700-314 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and impact resistant.

Samyang Corporation

TRIREX® Compound GS3025G20

TRIREX® Compound GS3025G20 is a Polycarbonate (PC) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Toray

Toyolac® ASG-20

Toray Toyolac® ASG-20Toyolac® ASG-20 is a Styrene Acrylonitrile (SAN) product filled with 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.Toyolac® ASG-20Toyolac® ASG-20 is an Acrylonitrile Butadiene Styrene (ABS) material filled with 20% glass fiber. It is available in Asia Pacific or Europe.Important attributes of Toyolac® ASG-20 are flame rated RoHS Compliant.

Nilit

Nilamid® A3 GF30 TF15

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

BARLOG plastics GmbH

Keballoy® 3D FE 170302 PP

Special compound for 3D effect painting based on PP, e.g. B. For decorative applications in the automotive exterior.

Grupa Azoty S.A

Tarnamid® T- 27 MCS HI

Poliamid 6 impact modified grade. ISO 1874-1: PA 6-HI, MR, 14-020

Chandra Asri Petrochemical

Trilene PP® BI9.0GA

Trilene BI9.0GA is an Impact Copolymer Polypropylene (ICP) for housewares, pail for paint Automotive parts, electric appliance part that requiring good impact strength.This grade use Unipol® polypropylene technology with latest catalyst technology.

ELIX Polymers, S.L.

Elix™ PC/ABS 5120

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

ELIX Polymers, S.L.

Elix™ ABS M203

Standard impact strength, easy-flowing, high gloss, in natural color optimized for selfcoloring. Major Benefits: High flow; Gloss surfaces. Typical Applications: Washing machine panel, Electrical switches, Distribution boards, Power sets.

Kolon Industries

Kopa® KN333HI5

Kolon Industries Kopa® KN333HI5 is a Polyamide 66 (Nylon 66) product. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Applications of Kopa® KN333HI5 include automotive, electrical/electronic applications and engineering/industrial parts. Characteristics includes flame rated RoHS compliant, impact resistant and medium viscosity.

Carbon Inc.

CarbonResin™ CE 221

CarbonResin™ CE 221 is a high performance material with excellent strength, stiffness, and temperature resistance (231 °C). CE is comparable to glass-filled nylon.

BARLOG plastics GmbH

Kebablend® / H 21.1200 PP

KEBABLEND / H 21.1200 PP is a functional compound based on PP with high density.

CP-Polymer Technik

Wellamid® 6600-PA66-GV 30 HWV0CP

CP-Polymer Technik Wellamid® 6600-PA66-GV 30 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Taro Plast

Nilene™ P K30VA S

Samyang Corporation

TRIBIT® 1500GN15

TRIBIT® 1500GN15 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Toray

Amilan® CM3001-N

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.