products in Automotive: Fluoroelastomer (FKM)

Greene Tweed

XYFLUOR® 860

Xyfluor® 860, a highly fluorinated elastomer compound, offers excellent chemical compatibility over a wide range of temperatures from -76°F to 450°F (-60°C to 232°C). Recommended for applications requiring a combination of low temperature properties and chemical resistance, Xyfluor's capabilities surpass those of standard fluoroelastomers, PTFE and graphite. Addtionally, Xyfluor reduces overall cost by extending equipment service life.

Precision Polymer Engineering

Precision Polymer™ V71C

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications.V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance.V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold (Arctic) operating environments Mechanical seals Flow meters & sensors Seal applications that are exposed to cold situations or high temperature variations.

Precision Polymer Engineering

Precision Polymer™ V70SW

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Daikin Industries, Ltd.

DAI-EL G-671

DAI-EL G-671, available in sheet form, features low-temperature flexibility and an odorless composition. Tailored for automotive fuel systems, it excels in applications like fuel lines, O rings, and fuel hoses. Utilizing chemical cure and compression molding, this product ensures dependable performance in various automotive and industrial applications.

Precision Polymer Engineering

Precision Polymer™ V74C

V74C is a fluoroelastomer (FKM) material developed to offer extremely low compression set combined with excellent heat aging properties.V74C has been engineered to retain its mechanical properties significantly longer than conventional FKM grades even under extreme temperature cycling, thereby providing increased service life and significantly lower the cost of ownership.V74C exhibits good resistance to acids and aqueous media, and excellent resistance to oil, fuels and hydraulic fluids at high temperature.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Extremely low compression set and cumulative compression set providing extended seal life Excellent long-term high temperature stability Superior heat aging properties for long-term sealing Typical Applications Vacuum pumps & compressors (high temperature applications) Mechanical seals Chemical pumps and valves Couplings and quick connectors

Precision Polymer Engineering

Precision Polymer™ V75G

V75G is a fluoroelastomer (FKM) material developed to offer good compression set performance and good all-round chemical resistance in operating temperatures up to 200°C (392°F).This material is used extensively in vacuum applications due to its low gas permeability and diesel engines where its broad chemical resistance, at medium operating temperatures, provides excellent long- term service life.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.V75G meets ASTM D2000 line call-out M2HK707, A1-10, B38, EF31, EO78, F15, Z1, Z2 (Z1 = color green & Z2 = comp-set 30% max.).Key Attributes Excellent long-term sealing performance Broad chemical resistance Colored green for easy identification Typical Applications Vacuum equipment Mechanical seals Marine diesel engines: Cylinder liners, Injection systems, Low temp. exhaust valve seals, Cooling channels

Daikin Industries, Ltd.

DAI-EL G-801

DAI-EL G-801, in sheet form, features good mechanical properties, odorless characteristics, acid resistance, and steam resistance. Tailored for automotive and industrial applications, it excels in cooling and climate components. With chemical cure and compression molding as its preferred methods, this product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

Daikin Industries, Ltd.

DAI-EL G-663BP

DAI-EL G-663BP, in sheet form, offers low-temperature flexibility, odorless properties, and good moldability. Serving automotive and industrial applications, it finds use in fuel lines, hoses, and O rings. This brown-colored product aligns with clean standards and utilizes injection molding processing methods.

Saint-Gobain

Fluran™ F-5500-A

Fluran F-5500-A is a Fluoroelastomer product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Chemical Resistant Corrosion Resistant UV Resistant Weather Resistant

Daikin Industries, Ltd.

DAI-EL G-755

DAI-EL G-755, in solid form, distinguishes itself with good processability and odorless characteristics. Suited for automotive and industrial applications, it excels in powertrains and equipment parts. Utilizing chemical cure and extrusion, this product offers reliable performance in components like fuel entrance cover seals and O rings.

Daikin Industries, Ltd.

DAI-EL G-7210BP

DAI-EL G-7210BP, available in sheet form, boasts odorless characteristics, a good compression set, and fluidity. Tailored for automotive and industrial applications, it proves its worth in powertrain and equipment parts. Utilizing injection molding, this product, soluble in lower ketones and esters, ensures reliable performance in components like fuel entrance cover seals and O rings.

Daikin Industries, Ltd.

DAI-EL G-7801

DAI-EL G-7801, in solid form, is characterized by scorch resistance, good fluidity, a low compression set, and odorless features. Tailored for automotive and industrial applications, it proves its worth in powertrain and equipment parts. Employing chemical cure and compression molding, this product ensures reliable performance in components like fuel entrance cover seals and O rings.

Daikin Industries, Ltd.

DAI-EL G-558

DAI-EL G-558 in sheet form is a white-colored product designed for automotive fuel systems. Exhibiting odorless characteristics, this product is suitable for applications like fuel lines, O rings, and fuel hoses. Employing chemical cure and extrusion methods, it stands out in both automotive and industrial settings.

Daikin Industries, Ltd.

DAI-EL G-9503

DAI-EL G-9503 showcases sheets with attributes like steam resistance and good mechanical properties. Colored white, it serves applications like O rings and turbocharger hoses in the automotive and transportation markets. The product, in powder and solid forms, is soluble in lower ketones and esters.

Daikin Industries, Ltd.

DAI-EL G-701BP

DAI-EL G-701BP shares the attributes of a good compression set, mechanical properties, and odorless characteristics with its solid form. Designed for automotive and industrial applications, it proves its worth in O rings. Employing chemical cure and compression molding, this product, soluble in lower ketones and esters, ensures reliable performance in demanding scenarios.

Greene Tweed

XYFLUOR® 870

Xyfluor® 870, a highly fluorinated elastomer compound, offers excellent chemical compatibility over a wide range of temperatures from -76°F to 450°F (-60°C to 232°C). Recommended for applications requiring a combination of low temperature properties and chemical resistance, Xyfluor 870 reduces overall cost by extending equipment service life.Xyfluor 870 parts can be made through high-volume injection-molding processing. Additionally, prototype parts are available for product testing.

Precision Polymer Engineering

Precision Polymer™ V75J

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments.V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives.V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations.Key Attributes Excellent resistance to hot water and steam Excellent resistance to oils, fuels and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (valve seats & liner rings) Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Cri-Tech, Inc.

Cri-Line™ GP-615

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Precision Polymer Engineering

Precision Polymer™ V72G

V72G is a fluoroelastomer (FKM) rubber, a Copolymer of vinylidene fluoride and hexafluoropropylene, colored green for easy identification.FKM materials typically provide excellent resistance to heat, aliphatic and aromatic hydrocarbons, chlorinated solvents and petroleum fluids. Fluoroelastomers offer superior O-ring sealing force retention over most other oil-heat resistant elastomers, with the exception of perfluoroelastomers.V72G is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent heat resistance and long-term sealing performance Broad chemical resistance Superior mechanical properties Colored green for easy identification Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Chemical processing equipment Pumps Valves

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.331" +/- 0.014" (8.4+/-.37 MM)

Easy Splice 0.331" +/- 0.014" (8.4 +/- 0.38 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ B 76 Durometer, Black O-Ring Cord, Easy Splice 0.118"+/-.008_(3.0+/-.21 MM)

76 Durometer - Black Viton B O-Ring Cord

Eagle Elastomer

Viton™ A 60 Durometer, Black O-Ring Cord, Easy Splice 0.393" +/- 0.015" (10.0+/-.39 MM)

Easy Splice 0.393″ +/- 0.015″ (10 +/- 0.58 MM) – 60 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 55 Durometer, Black O-Ring Cord, Easy Splice 0.29" +/- 0.013" (7.4 +/- 0.37 MM)

Easy Splice 0.29″ +/- 0.013″ (7.4 +/- 0.37 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 90 Durometer, Black O-Ring Cord, Easy Splice 0.197" +/- .008" (5.0+/-.21 MM)

Easy Splice 90 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 1.500" +/- .079" (38.1 +/- 2.01 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.250" +/- .010" (6.4+/-.31 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ A 90 Durometer, Black O-Ring Cord, Easy Splice 0.375" +/- .013" (9.5+/-.36 MM)

Easy Splice 90 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Daikin Industries, Ltd.

DAI-EL G-565

DAI-EL G-565 is a solid terpolymer consisting of vinylidene fluoride, tetrafluoroethylene, and hexafluoropropylene. Specifically designed for applications in the automotive and industrial sectors, this material excels in extrusion processability. Its primary attributes include remarkable fuel resistance, making it apt for automotive fuel lines, fuel hoses, and O-rings. Utilizing a chemical cure method, it stands out for its odorless nature and good processability.

Eagle Elastomer

Viton™ B 76 Durometer, Black O-Ring Cord, Easy Splice 0.415"+/-.015_(10.5+/-.43 MM)

76 Durometer - Black Viton B O-Ring Cord

Eagle Elastomer

Viton™ B 60 Durometer, Fluoroelastomer Sheet EE97359A

60 durometer black Viton B fluoroelastomer compound

Eagle Elastomer

3M™ Dyneon 75 Durometer, Brown FKM O-Ring Cord, Easy Splice 0.210" +/- .010" (5.3+/-.29 MM)

0.210"+/-.010_(5.33+/-.26 MM) 75 D_BRN_FKM_O-RING CORD

Eagle Elastomer

Viton™ A 65 Durometer, Black O-Ring Cord, Easy Splice 0.295" +/- 0.014" (7.5 +/- 0.37 MM)

Easy Splice 0.295" +/- 0.014" (7.5 +/- 0.37 MM) – 65 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Eagle Elastomer

Viton™ GLT-S 75 Durometer, Black O-Ring Cord, Easy Splice 0.331"+/-.012_(8.4+/-.32 MM)

75 Durometer - Black Viton GLT-S O-Ring Cord

Eagle Elastomer

Viton™ A 75 Durometer, Black O-Ring Cord, Easy Splice 0.079" +/- .004" (2.0 +/- .11 MM)

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Daikin Industries, Ltd.

DAI-EL G-952

DAI-EL G-952, available in sheet form, distinguishes itself with steam resistance, chemical resistance, good mechanical properties, low-temperature flexibility, an odorless nature, and acid resistance. Suited for automotive and industrial applications, it excels in cooling and climate components. Employing chemical cure and compression molding and transfer molding, this white-colored product ensures reliable performance in components like diaphragms, O rings, and turbocharger hoses.

Eagle Elastomer

3M™ Dyneon 75 Durometer, Brown FKM O-Ring Cord, Easy Splice 0.224" +/- .013" (5.7+/-.35 MM)

0.224"+/-.013_(5.69+/-.33 MM) 75 D_BRN_FKM_O-RING CORD