products in Automotive

Axel

MoldWiz® INT-EQ6

MoldWiz® INT-EQ6 - A non-silicone process aid additive for use in all types of rubber processing which eliminates the need for any external release agent minimizing mold and machine cleaning time. Facilitates processing by increasing the flow characteristics and lubricating qualities of the rubber formulation without affecting its mechanical properties. The cured product can be readily glued, bonded, coated, etc. and there is no exudation or deterioration after prolonged storage. There is an increase in elongation percentage and tensile strength with many formulations.

Pan Technology Inc.

PanTINT® 70W249

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Aliancys

Palatal® P51-01

Idesa Petroquimica

Idesa Petroquímica Dioctyl Phthalate

Idesa Petroquímica Dioctyl Phthalate is virtually colorless, oily liquid, insoluble in water, miscible with mineral oils.

Chi Mei Corporation

Wonderloy® PC-385

WONDERLOY® PC-385 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant

Pergan

PEROXAN DC-40 GS

PEROXAN DC-40 GS is Dicumyl peroxide 40%, Granules with chalk.PEROXAN DC-40 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

BARLOG plastics GmbH

Kebater® PBT BFA30

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

DOMO Chemicals

Thermec™ N 4314R35H

Kolon Industries

HIKOTACK® P-90

Kolon Industries HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Samyang Corporation

TRIREX® 3022IR(01)

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022IR(01) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022IR(01) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

Polynt Group

ARMORCOTE® SP

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

Precision Polymer Engineering

Perlast® G75B

Description Perlast® G75B offers a unique blend of excellent chemical resistance, mechanical properties and high temperature stability, simultaneously extending the operating limits in all three aspects.Perlast® G75B has been specially formulated to provide increased acid resistance by eliminating fillers that are prone to acid attack and optimizing the polymer structure. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in, for example, valves, pumps and mechanical seals.A high modulus makes Perlast® G75B resistant to extrusion and ideal for use in medium-high pressure applications. In addition, the low cumulative compression set provides a high mean-time between maintenance cycles in hot chemically aggressive environments.Perlast® G75B is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2m/6.5ft internal diameter) and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperature Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Less than 2% swell in MIL-L-23699C jet oil after 336 hours at 200°C Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

Saint-Gobain

Chemfluor™ UHMW Polyethylene Flim

Chemfluor UHMW Polyethylene Flim is an Ultra High Molecular Weight Polyethylene product. It is available in North America. Applications of Chemfluor UHMW Polyethylene Flim include bags/liners, engineering/industrial parts and food contact applications.Characteristics include: Chemical Resistant High ESCR (Stress Crack Resistant) Impact Resistant Wear Resistant

SHD Composites

SHD Composites MTC811

MTC811 is a toughened, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

Nilit

Nilamid® A3 J10 GF13

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Taro Plast

Taromid™ B 280 ZG6

Idemitsu Chemicals

Tarflon® AZ1900T

Transparency, Flame retardant

INNO-COMP

INNOPOL® CS 2-5000

INNOPOL® CS 2-5000 is a polypropylene block-copolymer compound. This grade is available in nature and custom colored form.

Elastron

SEBS - ELASTRON G501.A50.N.PS

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

BARLOG plastics GmbH

Kebaform® / C 25 H

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Toray

Toray AmberTool® HX42

Toray Toray AmberTool® HX42 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 190°C (374°F) is achieved. Toray AmberTool® HX42 is an exceptional and very well proven system that exhibits a high end use temperature and extended out life. 50–75°C (122–167°F) Low Temperature Curing Epoxy Tooling Prepreg.

Samyang Corporation

TRIBIT® 1500GN30

TRIBIT® 1500GN30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Menzolit Ltd.

Menzolit® SMC 1100

menzolit® SMC 1100 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

Lion Elastomers

Royalene® 301T

A DCPD Polymer for Electrical Insulation and Blends for Tire and Inner Tube Applications

DIC Corporation

DIC.PPS® FZ-2140

Outline: FZ-2140 is a 40% glass fiber reinforced linear polyphenylene sulfide compound that is well balanced with excellent engineering properties and processability. Color: Black

Toray

Nomex® Honeycomb Core—Commercial Grade

Toray Nomex® Honeycomb Core—Commercial Grade is manufactured from Nomex® paper sheets and is coated and bonded together with a phenolic resin. Designed to offer industrial users and designers high strength-to-weight properties at relatively low cost, Nomex® honeycomb is particularly suitable as a core material for production of nonmetallic sandwich structures using high performance fiber reinforced composites as the facing material.

Axel

MoldWiz® IMRI

MoldWiz® IMRI - A non-silicone process aid additive for use in all types of rubber processing which eliminates the need for any external release agent minimizing mold and machine cleaning time. Facilitates processing by increasing the flow characteristics and lubricating qualities of the rubber formulation without affecting its mechanical properties. The cured product can be readily glued, bonded, coated, etc. and there is no exudation or deterioration after prolonged storage. There is an increase in elongation percentage and tensile strength with many formulations.

Momentive Performance Materials

Silplus™ 60 EX

Silplus™ 60 EX is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in extrusion, press-molding injection and calendaring. Silplus™ 60 EX heat cured silicone may be considered for use in a wide variety of high quality applications such as high durometer tubes and profiles.Key Features and Benefits excellent extruding processability good mechanical properties high green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 EX heat cured silicone is an excellent candidate to consider for use in most types of extrusion and calendaring applications.

Saint-Gobain

Rulon® J

Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and is self lubricating.Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.

Boltaron Inc - A SIMONA Company

Boltaron® 9815F

Boltaron® 9815F is a thermoformable far-rated sheet with film.

DIC Corporation

DIC.PPS® FZ-2100

Outline: FZ-2100 is an un-filled polyphenylene sulfide compound with excellent ductility and flexibility. Color: Black and Natural

JSR Corporation

Techno Polymer JSR EP96

JSR EP96 is high filler loadingoil extended EPDM.

QAPCO

Lotrène® FD 0274

Lotrène® FD 0274 is mainly recommended for the extrusion of thin film for light and medium duty applications. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.

DOMO Chemicals

Domamid® 66H1

Domamid® 66H1 is polyamide 66, heat stabilized, is used for injection molding.

Taro Plast

Tarodur™ 70

Barrday

Barrday Thermoplastic Systems

Lightweight, cost competitive and ballistically superior, Barrday’s thermoplastic resin based products can be molded into complex 3D shapes and reshaped using high temperatures. Their excellent ballistics properties make thermoplastics ideal for a wide range of applications including stab resistant materials and composite armors. Ballistic panels made using these resins can be used as either as stand-alone structures or in combination with steel or ceramic in personal or vehicle armor.