products in Body Shop & Repair

Harcros Chemicals Inc.

T-Mulz® Z 900

T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.

Dar-Tech Inc.

Vertal® 92

Vertal® 92 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 92 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Dar-Tech Inc.

Vertal® 97

Vertal® 97 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 97 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Suncolor Corporation

SUNSPHERES™ 03.0

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Eagle Chemicals

USP-EAGLE (BF36-62)

USP-EAGLE (BF36-62) is Unsaturated Polyester resin with high hardness, high reactivity, good wetability, fast drying and early sandability.it is used in standard &Light weight body filler for cars.

Eagle Chemicals

USP-EAGLE (BF40-68)

USP-EAGLE (BF40-68) is a pre-accelerated Unsaturated Polyester resin with high flexibility, medium reactivity.it is used as standard & light weight body filler for cars.

Suncolor Corporation

SUNSPACERS™ 04.X

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

EpoxySet Inc.

EPOXIBOND™ EB-116

EPOXIBOND™ EB-107LP-1 is a two component, room temperature curing epoxy featuring very low viscosity, and excellent optical-mechanical properties.

Suncolor Corporation

SUNSPHERES™ 200 Nm

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

Suncolor Corporation

SUNSPHERES™ 15.0

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

Suncolor Corporation

SUNSPHERES™ 200 Nm ST-3

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Epic Resins

Epic Resins EPIC S7428

Epic Resins Epic S7428 is a two component urethane paste which is designed to be used for automotive body repair. S7428 features a convenient 1:1 volumetric ratio with a light paste consistency for easy workability. S7428 has been tested and meets ROHS requirements. This material adheres to PVC with a bond so strong the PVC breaks before the adhesive bond.

Epic Resins

Epic Resins EPIC S7045

Epic Resins Epic S7045 is a two component, extremely fast-curing epoxy adhesive. The 1 to 1 mix ratio, rapid cure and good adhesion offered by this epoxy resin adhesive system make it ideal for many applications. This epoxy adhesive is particularly useful for field repairs. Epic S7045 adhesive is recommended for any application requiring bonding of wood, metal, plastics and/or concrete.

Bonyan Kala Chemie

BAM 203 X-60

BAM 203 X-60 is a medium oil alkyd resin based on soybean oil fatty acid which offers excellent hardness, surface and deep drying and gloss and gloss retention.

CEC Corp

C-POXY 15

C-POXY 15 is a general-purpose, unfilled, fast-setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers).

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-7

Demeter Technologies Aluminum Oxide YL-7 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

InnoChem

K-Bond ACRYLIC Ultra Penetrating

K-Bond Acrylic Ultra Penetrating is a premium quality acrylic adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed. Uses include bonding, laminating, installation of pieces and repairs.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-5

Demeter Technologies Aluminum Oxide YL-5 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

Khimvolokno Plant

GRODNAMID PA6-GF20 M10

GRODNAMID PA6-GF20 M10 is glass filled polymer composite material.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-4

Demeter Technologies Aluminum Oxide YL-4 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-1

Demeter Technologies Aluminum Oxide YL-1 is a high purity good cut/fine finish aluminum oxide powders for a variety of surface correction formulations.

Bonyan Kala Chemie

BAM 208 WSX-55

BAM 208 WSX-55 is a medium oil alkyd resin based on soybean oil fatty acid which offers very good hardness, surface and deep drying and adhesion and excellent gloss and gloss retention.

InnoChem

K-Bond POLYESTER Buff Paste

K-Bond Polyester Buff Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Add-Additives

ADD 6211

ADD-6211 is a wetting and dispersing additive for solvent-based and solvent-free coatings and composite. ADD-6211 is suitable for stabilizing inorganic pigments and extenders and strongly reduces mill-base viscosity. ADD-6211 is suitable for coatings and composite.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-2

Demeter Technologies Aluminum Oxide YL-2 is a high purity rapid cut/good finish aluminum oxide powders for a variety of surface correction formulations.

InnoChem

K-Bond POLYESTER Transparent Flowing

K-Bond Polyester Transparent Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces, and repairs.

InnoChem

K-Bond POLYESTER Buff Flowing

K-Bond Polyester Buff Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Ziegler & Co. GmbH Naturprodukte

Ziegler & Co. GmbH Naturprodukte Perlite Microspheres

Ziegler & Co. Naturprodukte Perlite Microspheres is the multicellular, closed hollow spheres are produced from a volcanic raw material which is formed to a white, intert material with high volume by a special expansion process.

RECKLI

RECKLI Epoxy GF Filler

RECKLI Epoxy GF Filler is a pasty, glass fiber reinforced, solvent-free twocomponent epoxy resin with high impact resistance as well as compressive- and flexural strength. It is almost shrinkage-free and insensitive to moisture, thus being applicable on slightly humid surfaces. The addition of further filling material is not recommended.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-19

Demeter Technologies Aluminum Oxide YL-19 is a high purity rapid cut/good finish aluminum oxide powders for a variety of surface correction formulations.

Manus Products

Manus-Bond 75AM Fast Cure

Manus-Bond 75AM Fast Cure (N33-1) is an environmentally friendly, VOC compliant, moisture curing hybrid elastomeric adhesive/sealant. 75AM Fast Cure (N33-1) is designed for primerless adhesion to most common trailer and construction assembly substrates. This product is fast cure, high strength and remains flexible in low temperature extremes. 75AM Fast Cure (N33-1) does not contain solvents or isocyanates. The ease of one-part makes 75AM Fast Cure (N33-1) the perfect choice for both manufacturing and repair.

Demeter Technologies

Demeter Technologies Aluminum Oxide YL-12

Demeter Technologies Aluminum Oxide YL-12 is a high purity fine polish aluminum oxide powders for a variety of surface correction formulations.

InnoChem

K-Bond VIVID Knife Grade

K Bond Vivid Knife Grade is a premium quality, low color Vinyl Ester stone adhesive. K-Bond VIVID is a corrosion-resistant, ultra-fast curing, high adhesion adhesive. For use with natural stone, quartz, ceramics, porcelains and dense surfacing material. Perfect for application with light or white substrates. Uses include bonding, laminating, miters, installation of pieces, and repairs.

CEC Corp

C-POXY 30

C-POXY 30 is a general purpose, structural, unfilled, fast-setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers).

Manus Products

Manus-Bond 75-AM HIGH GREEN STRENGTH

Manus-Bond 75-AM High Green Strength is an environmentally friendly, VOC compliant adhesive for the transportation industry. Manus-Bond 75-AM High Green Strength is designed to have very high green strength or initial tack to hold parts in place while the adhesive cures. The fast cure, high strength, low temperature flexibility, and ease of a one-part make Manus-Bond 75-AM High Green Strength the perfect choice for both manufacturing and repair.

Click Bond

Click Bond CB96 - CB440 Sealant Kit

Click Bond CB96 - CB440 Sealant Kit provides all materials necessary to mix and apply 5.0g of CB440 (MIL-S-8802 compliant) sealant. Ideal for small jobs or repairs or for installation of 3-4 Click Bond adhesive-bonded fasteners.