products in Bonding & Assembly: Defoamer

Momentive Performance Materials

CoatOSil™ 7030 Coatings Additive

Momentive's CoatOSil™™ 7030 Addressing Critical Coating Properties additives portfolio provides a broad range of products to address a large range of performance needs in the coatings industry. CoatOSil™ additives can improve coating processability and help enhance surface appearance. Momentive tailors the structure of each CoatOSil™ additive molecule and produces a variety of grades with differing utility in water or solvent borne coating application, whether the most critical properties are related to foam control, anti blocking, wetting, slip or flow and leveling.

Munzing

AGITAN® A203E

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Munzing

AGITAN® P 803

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

Munzing

AGITAN® 305

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Munzing

AGITAN® DF 6686 W

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

Munzing

DEE FO® 1015

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

Munzing

AGITAN® DF 681 F

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

Munzing

AGITAN® P 801

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Munzing

AGITAN® P 841

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Munzing

AGITAN® E 255

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Munzing

AGITAN® 299

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

Munzing

AGITAN® P 840

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Munzing

AGITAN® P 833

AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Momentive Performance Materials

CoatOSil™ 7510 Coatings Additive

CoatOSil™ 7510 coatings additive is a silicone copolymer with a pendant structure and polypropylene oxide (PO) side chains. The all PO side chain helps minimize the potential for foam stabilization, making CoatOSil™ 7510 coatings additive an excellent candidate as a defoamer in water-borne industrial or decorative coating formulations.

Munzing

AGITAN® 352

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

Munzing

AGITAN® 526

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Munzing

AGITAN® 108

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

Munzing

AGITAN® 280

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

Munzing

AGITAN® DF 999

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

Munzing

AGITAN® DF 6120

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

Evonik

AEROSIL® R 202

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

Munzing

AGITAN® DF 6575 GM

AGITAN DF 6575 GM is a defoamer for all common emulsion systems. It provides the following properties which is extremely versatile, good compatibility, effective over a wide pH range.

Munzing

AGITAN® A201

Only available in Asia! A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. AGITAN A201 may also be utilized in OPV, printing ink, emulsion polymers of all chemistries, architectural coatings and high gloss industrial coatings.

Munzing

AGITAN® P 813

AGITAN P 813 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 813 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Munzing

AGITAN® A208

only available in Asia! A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. AGITAN A208 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coating formulations as well.

Munzing

AGITAN® DF 6027

AGITAN® DF 6027 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams retains high efficiency.

Munzing

AGITAN® DF 6029

AGITAN® DF 6029 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams, retains high efficiency.

Munzing

AGITAN® 150

AGITAN 150 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 150 is resistant to alkaline environment. It can be used between pH 6 and 11.

Munzing

AGITAN® DF 581 B

AGITAN DF 581 B is a defoamer for all common emulsion systems. It provides the following properties that is Extremely versatile, very fast action, non silicone based, Effective under acidic and alkaline conditions.

Munzing

AGITAN® 381

AGITAN 381 is a highly effective, low-emmision defoamer and has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, pigmented systems, low viscosity systems and emulsion manufacturing.

Munzing

AGITAN® P 800

AAGITAN P 800 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 800 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Munzing

DEE FO® 2020E/50

A highly persistent and cost effective oil-based defoamer specially designed for use in most emulsion polymers including EVA, VA, and acrylic formulations. Also provides excellent cost effectiveness in many adhesive applications, such as PSA, laminating, packaging, envelope & label, and construction formulations.

Munzing

DEE FO® PI-12

A high efficiency foam control additive designed especially for OPV and most printing inks, such as corrugated, coated paper, packaging, film and foil.

Munzing

AGITAN® P 845

AGITAN P 845 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 845 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 845 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Munzing

DEE FO® 97-3

A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. DEE FO 97-3 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coating formulations as well.