Products in Bonding & Assembly

Oppanol® B 12 N is a solid compound renowned for its dual functionality as a water vapor barrier and viscosity modifier. Classified within the chemical family of polyisobutylene polymers (PIB), this product aligns with high standards, bears halal and kosher labeling claims, and is sourced from renewable resources.

WACKER® HA - Hybrid Adhesive is a high-strength, silicone-free all-purpose adhesive suitable for bonding or repairing many different substrates. It cures at room temperature in the presence of atmospheric moisture to form a permanent hard rubber. The adhesive is almost odorless, non-corrosive, and non-staining. It can be painted over and is weatherable, making it highly resistant to various media such as mineral oils, solvents, acids, and alkalis.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

ELASTOSIL® K760 C is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, excellent tooling characteristics, and very good fire retardant properties for construction, glass, and window building, as well as industrial applications. ELASTOSIL® K760 C cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

ELASTOSIL® eco 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. ELASTOSIL® eco 7000 N is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

ELASTOSIL eco 7750 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and excellent tooling characteristics for construction, glass, and window building, as well as industrial applications. ELASTOSIL® eco 7750 N is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.

HDK® H2000 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H2000 is primarily used as a reinforcing filler in silicone-elastomers, enhancing their properties. Furthermore, it serves as a free flow additive in the production of technical powders and finds application as an additive in antifoam agents.

ELASTOSIL® eco 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. ELASTOSIL® eco 4100 is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.

IMSIL® A-25 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® 1240 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-8 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

Vertal® 97 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 97 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Vertal® 92 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 92 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

IMSIL® A-30 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-10 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-15 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-75 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

Crestomer® 1151A Structural Adhesive has Lloyd's approval. This high-performance structural adhesive and filleting compound is specially designed for bulk applications with either a 10:1 catalyst ratio or a 50:1 catalyst ratio. It exhibits non-sagging and fast-gelling properties, enabling the user to work with bonded parts in 2 hours. Compared to other competitive structural adhesives, this product has noticeably less odor and can be used to bond a wide range of substrates with minimal surface preparation.