products in Bonding & Assembly

Munzing

AGITAN® DF 999

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

BARLOG plastics GmbH

Kebaform® / C 130 H

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Kolon Industries

SUKOREZ® SU-420

Kolon Industries SUKOREZ® SU-420 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-420 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Munzing

AGITAN® 108

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

Munzing

AGITAN® DF 6120

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

Kolon Industries

HIKOREZ® T-3100

Kolon Industries HIKOREZ® T-3100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). HIKOREZ® T-3100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Kolon Industries

SUKOREZ® SU-625

Kolon Industries SUKOREZ® SU-625 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-625 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

BARLOG plastics GmbH

Kebaform® C 50.0

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

Grupa Azoty S.A

Tarnoform® 300 CI4

Very high impact grade, also at low temperatures, high strength along weld lines ISO 9988-1: POM-K, M-GNPR, 01-001

Kraton

UNI-REZ™ 2223

UNI-REZ 2223 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kraton

UNI-REZ™ 2641

UNI-REZ 2641 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2641 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

Nylene

Nylene® 132 HSL

Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

BARLOG plastics GmbH

Kebaform® / C FE 161105

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

BARLOG plastics GmbH

Kebaform® C 90 M

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

Kraton

UNI-REZ™ 2638

UNI-REZ 2638 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2638 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

Kraton

UNI-REZ™ 2720

UNI-REZ 2720 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2720 hot melt polyamide adhesive offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.

BTC Europe GmbH

Oppanol® B 12 N

Oppanol® B 12 N is a solid compound renowned for its dual functionality as a water vapor barrier and viscosity modifier. Classified within the chemical family of polyisobutylene polymers (PIB), this product aligns with high standards, bears halal and kosher labeling claims, and is sourced from renewable resources.

Evonik

AEROSIL® R 805

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

Evonik

AEROSIL® R 106

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

Evonik

AEROSIL® R 812

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

Evonik

AEROSIL® R 972

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

Evonik

AEROSIL® 200

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

Evonik

AEROSIL® R 202

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

Wacker Chemie AG

ELASTOSIL® N 2010

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

Wacker Chemie AG

ELASTOSIL® N 2034

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

Wacker Chemie AG

ELASTOSIL® N294

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.

Wacker Chemie AG

ELASTOSIL® eco 7000 N

ELASTOSIL® eco 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. ELASTOSIL® eco 7000 N is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

Wacker Chemie AG

ELASTOSIL® K760 C

ELASTOSIL® K760 C is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, excellent tooling characteristics, and very good fire retardant properties for construction, glass, and window building, as well as industrial applications. ELASTOSIL® K760 C cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

Wacker Chemie AG

ELASTOSIL® N199 Transparent

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

Wacker Chemie AG

ELASTOSIL® N10 Transparent

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

Wacker Chemie AG

ELASTOSIL® N291

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.

Wacker Chemie AG

WACKER® HA - Hybrid Adhesive

WACKER® HA - Hybrid Adhesive is a high-strength, silicone-free all-purpose adhesive suitable for bonding or repairing many different substrates. It cures at room temperature in the presence of atmospheric moisture to form a permanent hard rubber. The adhesive is almost odorless, non-corrosive, and non-staining. It can be painted over and is weatherable, making it highly resistant to various media such as mineral oils, solvents, acids, and alkalis.

Wacker Chemie AG

ELASTOSIL® N9111 White

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

Wacker Chemie AG

ELASTOSIL® N288

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

Wacker Chemie AG

ELASTOSIL® N9111 Black

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

Wacker Chemie AG

ELASTOSIL® N 2199

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.