products in Aerospace Coatings

Hoffmann Mineral

SILLITIN Z 89 puriss

SILLITIN Z 89 puriss is similar to Sillitin Z 86 puriss but has a higher color requirements.

Elinor Coatings

Aluma45® MG-Rich Primer

Elinor Aluma45® preserves the substrate via patented active sacrificial protection. This allows a long-lasting and stable defense from degradation and corrosion and exceptional adhesion for all aluminum alloys by using magnesium pigment in an epoxy-modified polyamide. This primer completely eliminates chromium from your coating system and helps you meet health and environmental compliance in your operations easily and affordably.

Pan Technology Inc.

PanTINT® 87B1204

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

White Engineering Surfaces Corporation

WESCOAT® MA02P7

WESCOAT® MA02P7 is a coating product that will guarantee performance and longer lifespans. WESCOAT® MA02P7 addresses the friction, wear and erosion issues.

Polynt Group

Polymac® HS 220-2010

Polymac® HS 220-2010 is a high solids polyester resin that is HAPs-free. It is designed to produce 2.8 VOC compliant coatings with superior weatherability and excellent film properties, including skydrol resistance. It is an excellent blending resin for acrylics and similar resins to enhance film performance and VOC in either isocyanate or melamine cured systems. Manufactured in North America.

Pan Technology Inc.

PanTINT® 86R1616

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Crown Color Technology

Crown Chemical Co BVH RED 393

White Engineering Surfaces Corporation

WESCOAT® WC07H2

WESCOAT® WC07H2 is a coating product that will guarantee performance and longer lifespans. WESCOAT® WC07H2 addresses the wear and erosion problems.

Swada

Swada T Stellar Green 8

T Stellar Green 8 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Pan Technology Inc.

PanTINT® 18V1901

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Spolchemie

Spolchemie CHS-EPOXY 141 4F5

CHS-EPOXY 141 4F5 is a Modified by 5% of flow control agent.

Products Techniques

Products Techniques PT-805 High Heat Silicone Coating

Products Techniques PT-805 High Heat Silicone Coating comes under silicones type and is available in bulk.

Pacific Resins & Coatings

Pacific Resins & Coatings MIL-PRF-85285E TY III Cl W

Pacific Resins & Coatings MIL-PRF-85285E Ty III Cl W is a two-component aliphatic, high solid, waterborne polyester polyurethane coating. This chemically cured waterborne polyurethane forms a film that is resistant to chemicals, solvents, and abrasion.

Polynt Group

Polymac® 5190

Polymac® 5190 is a high reactivity, bloom-resistant, storage-stable carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 wt. Ratio. It will cure at 130°c for 25 minutes. The resulting coatings exhibit excellent exterior durability and mechanical properties along with good flow.

Mason Color Works

Mason Color Works Iron Chromite Brown Spinel - 7135 Brown 35

Mason Color Works Iron Chromite Brown Spinel - 7135 Brown 35 is an inorganic pigment, is a reaction product of high temperature calcination in which Iron (II) Oxide, Iron (III) Oxide, and Chromium (III) Oxide in varying amounts are homogeneously and ionically interdiffused to form a crystalline matrix of spinel. Its composition may include any one or a combination of the modifiers Al2O3, B2O3, CoO, LiO, MgO, NiO, SiO2, SnO2, or TiO2.

Pflaumer Brothers

Innores® 24-0790 BON Red

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

PPG Silica Products

PPG LO-VEL® 8100

PPG LO-VEL® 8100 flatting agent is high-efficiency flatting agent that is idea for use in a variety of coating systems. Lo-Vel 8100 flatting agent is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. A combination of high flatting efficiency, resistance-to-settling and heat-age stability provides formulation flexibility and expanded process capability.

WPC Technologies

Hybricor™ 204 - Hybrid Corrosion Inhibitor Pigment

Hybricor™ 204 - Hybrid Corrosion Inhibitor Pigment is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr6+ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (< 20 micron) applications. It does not affect pot life of 2K systems. Use level varies by intended application requirements.

California Hardcoating

Perma-New™ V-2 Class (UV-c​​ured) Coatings

Perma-New™ V-2 Class (UV-c​​ured) Coatings are proprietary formulations of UV-curable monomers in alcohol solvents. Typically, they will be colorless to pale amber liquids containing 20-50% solids (i.e., polymerizable and non-volatile materials, not including solvents). The percentage of solids is adjusted to match the intended application method. These coatings will adhere to many kinds of plastics without requiring a primer. At a target thickness of 4 to 12 microns, when fully cured, this class of coating will resist 5 double rubs under firm thumb pressure with #0000 steel wool, with few or no visible scratches. even on polycarbonate. Taber abrasion resistance on acrylic or polycarbonate will be outstanding compared to uncoated plastic.

Pflaumer Brothers

Teraflow® 5000

Teraflow® 5000 contributes to a smooth film in water-based latex systems, urethanes, water-reducible and water-dispersible alkyd and polyester formulations for both air-dry and baking applications. At 40% active, the product offers a well-balanced surface-active functionality that provides an excellent combination of hydrophilic and hydrophobic attributes, allowing the formulator to optimize the dispersion of almost all pigments and extenders.

Pan Technology Inc.

PanTINT® 87B1250

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Pan Technology Inc.

PanTINT® 86Y1436

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

ASCOTEC

ASCONIUM® 140

ASCONIUM® 140 are organic liquid-type additives which can provide excellent long-term anticorrosion performance to pigmented or clear coatings. ASCONIUM® additives can be used in waterborne, as well as in solventborne coatings, either as single products or in combination with active pigments.

Zip-Chem

Cor-Ban® 23 Enhanced Dye

Cor-Ban® 23 Enhanced Dye offers the fast dry time and thin film as well as inhibition.

Zip-Chem

Cor-Ban® D-5029NS

Cor-Ban® D-5029NS is a long lasting, high solids water displacing CIC used for for high profile aircraft substrates.

KSCNT

Reacrone RLP-111

Reacrone RLP-111 is based on a liquid acrylic polymer carried on polyester resin.

Ceram-Kote

CeRam-Kote® TZM

CeRam-Kote® TZM is ceramic coating engineered to provide excellent abrasion and corrosion protection in the aerospace industry.

NBD nanotechnologies

RepelFlex® AM

RepelFlex® AM is a family of UV curable, flexible, hard coatings that are designed for a variety of substrates. RepelFlex® AM is designed specifically for the prevention of microbial growth, while at the same time providing a highly transparent, durable, scratch and stain resistant surface. The coating is extremely transparent, flexible and thin, and thus preserves the look and feel of original article. It is available in transparent hardcoat and matte soft-touch formulations. RepelFlex is the environmentally friendly option as it contains no solvent or fluorine and is a UV curable applicable for standard wet deposition methods.

PCI Group

PCI Group SLICKO 1000

SLICKO 1000 is a complex blend of linear dimethicone polymers and aliphatic solvent. The result is a medium viscosity fluid solution which is easily measured and added to paints in very small quantities. SLICKO 1000 is non-reactive and is effective in all types of solvent based enamels, lacquers and synthetic paints including catalyzed systems such as urethanes.

A&C Catalysts

Technicure® D-44

Technicure® D-44 is a pulverized grade of dicyandiamide with an average particle size of about 20 micron. The products contains fumed silica to prevent clumping and improve flow. Typically the product is used with epoxy resin between 3-8 phr. Due to larger particle size, the products offers lower exothermic heat than the finer grade of Dicy. Technicure® D-44 reacts with epoxy resin at temperatures higher than 170°C unless an accelerator is used. Suggested accelerators include Technicure® LC-80, Technicure® LC-100 and substituted ureas such as Technicure® MDU-11M, Technicure® PDU-250M and Technicure® TDU-200M. The type and loading level of an accelerator will provide excellent balance of low temperature reactivity and formulation shelf stability.

Pan Technology Inc.

PanTINT® 18K1366

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Pan Technology Inc.

PanTINT® 12W1134

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Pan Technology Inc.

PanTINT® 90N1556

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

ASCOTEC

ASCONIUM® 130

ASCONIUM® 130 are organic liquid-type additives which can provide excellent long-term anticorrosion performance to pigmented or clear coatings. ASCONIUM® additives can be used in waterborne, as well as in solventborne coatings, either as single products or in combination with active pigments.

Lu'An Jietonda New Material

Jietonda® SA5060

Lu'An Jietonda New Material SA5060 is a Debubbling agent for powder coatings on porous substrates.Jietonda® SA5060 is a specific de-bubbling agent designed for eliminate bubbling of powder coated on porous substrates.

Crown Color Technology

Crown Chemical Co BVH YELLOW 165