products in Aerospace Coatings

Polynt Group

Polymac® 5650

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Pan Technology Inc.

PanTINT® 12V1839

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

GEO Specialty Chemicals Inc

TRI-REZ® Polyol 1030-60

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Kraton

Kraton™ D1192 A

Kraton D1192 A is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 AT - supplied as porous pellets dusted with talc Kraton D1192 AS - supplied as porous pellets dusted with amorphous silica Kraton D1192 ASM - supplied as powder dusted with amorphous silica Kraton D1192 ATM - supplied as powder dusted with talc for the North American market Kraton D1192 A is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

A&C Catalysts

Technicure® MDU-11

Technicure® MDU-11M, [4,4’- (methylene bis (phenyl dimethyl)] urea, is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability.

Spolchemie

Spolchemie CHS-EPOXY 121

CHS-EPOXY 121 is a Medium molecular weight "3,5 - type" epoxy resin.

Kraton

Kraton™ D1101 A

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

Polynt Group

Polymac® 5900

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

NuSil Technology

NuSil™ R-2560

NuSil™ R-2560 is a wide temperature range, RTV silicone elastomer (red).

Lu'An Jietonda New Material

Jietonda® SA580

Jietonda® SA580 is a glycidyl containing solid acrylic resin designed for applying in exterior durable carboxyl functional polyester powder coatings to provide low gloss of max. 10%(60°) and excellent weather-resistance.

A&C Catalysts

Resicure® 2MI

Resicure® 2MI is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 3-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 1.5 phr. Jet milled grade of Resicure imidazole is available as Resicure 2MI-J.

Jubail Chemical Industries

Araldite® GT 7004

Araldite® GT 7004 is a solid medium molecular weight epoxy resin based on Bisphenol A.

A&C Catalysts

Technicure® TDU-200M

Technicure® TDU-200M is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability.

CLiQ SwissTech

CLiQFLOW® 707

CLiQFLOW® 707 is a hydrogenated castor oil based thixotropic additive for solvent-free and non-to low-polar solvent based systems. It imparts a strongly shear thinning flow behavior with excellent sag resistance and good flow and leveling. Anti-settling properties and work ability are also improved with the organic thixotrope.

Kraton

Kraton™ D1126 P

Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified below. Kraton D1126 PT - supplied as a dusted dense pellet Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Momentive Performance Materials

CoatOSil™ 7604B Coatings Additive

CoatOSil™ 7604B coatings additive is a silicone copolymer with a pendant ethylene oxide side chain that can enable excellent wetting and recoatability in water-borne coatings and inks. For water-borne primers and other industrial coatings, CoatOSil™ 7604B coatings additive is a good candidate where wetting and recoatability are a principal requirement.

Poly-Resyn

Suspeno 201-X

SUSPENO 201-X provides anti-settling, pigment suspension and sag control with no increase in apparent viscosity. SUSPENO 201-X is an organic compound that affects the rheology of fluid systems. Performance is achieved by highly efficient dispersions in pigmented coatings. Field experience shows marked improvement in brushing and leveling.SUSPENO 201-X is reliable and provides uniform performance, being neutral and is not dependent on activation by heat or chemicals. It is unaffected by the nature of the binder, oils, resins, varnishes or vehicles. SUSPENO 201-X has no effect on gloss, color, color retention, flexibility, cure time water and chemical resistance, adhesion or durability.

Reichhold

EPOTUF® 37-143

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

Kraton

Kraton D1124K

Kraton D1124 K is a clear, radial triblock copolymer based on styrene and isoprene, with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 KU - supplied as an undusted porous pellet Kraton D1124 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton

Kraton RP6670

Kraton™ G SEBS polymers provide outstanding adhesion to metals and non-polar materials like plastics and composites. Coatings with functionalized Kraton™ RP6670 SEBS deliver exceptional substrate adhesion, durability and corrosion-resistance. These coatings are ideal for the protection of piping, concrete, architectural structures and vehicle undercarriages. It can also be used in building envelope applications such as waterproofing foundations and other structure sections.

Bernd Schwegmann

SCHWEGO® mar 8305

Slip additive for water-based coating systems. SCHWEGO mar 8305 is suitable for water borne systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems, acid curing melamine and urea systems, oil-free polyesters.

Pan Technology Inc.

PanTINT® 90B1203

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Altropol Kunststoff

AltroColor EP 2018

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor EP 2018 is oxide black colored.

Pan Technology Inc.

PanTINT® 18R1658

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Miller-Stephenson Chemical

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings is a non-flammable, solvent-based, one-component polyurethane conformal coating provided in the convenience of aerosol. Our coating provides excellent electrical and barrier properties in a thinfilm applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-470C will maintain its properties even after long exposure to the elements with minimal color change.

Kraton

Kraton™ D1163 J

Kraton D1163 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1163 JSP supplied as dusted, dense pellet. Kraton D1163 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton

Kraton™ D1164 P

Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below. Kraton D1164 PT - supplied as a dusted dense pellet Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Reichhold

AROFLINT® 809

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

Kraton

Kraton™ D1111 K

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Incorez Ltd

Incozol 2

Incozol 2 acts as an effective moisture scavenger in polyurethane coatings. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content.

Jubail Chemical Industries

Araldite® GT 6750

Araldite® GT 6750 N is a high flow, solid, epoxy resin based on bisphenol A containing 2.5% flow agent.

Voxco Pigments and Chemicals

VOXCO PIGMENT RED 53:1 SC 507

VOXCO PIGMENT RED 53:1 SC 507 is suitable for use in Powder Coating

Kraton

Kraton™ D1157 A

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D1118 K

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D1157 E

Kraton D1157 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 ES - supplied as porous pellets dusted with amorphous silica Kraton D1157 ETM - supplied as powder dusted with talc for the North American market Kraton D1157 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton

Kraton™ D0243 K

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.