products in Coatings & Finishes: Corrosion Inhibitor

INVISTA

Dytek® BHMT

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

INVISTA

Dytek® BHMT-HP

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

allnex

BECKOPOX™ EM 2120w/45WA

BECKOPOX™ EM 2120w/45WA is a dispersion and liquid within the epoxy and epoxy derivatives chemical family, functioning as a binder, resin, and corrosion inhibitor under CASE Ingredients. Targeting automotive and transportation, paints and coatings, and building and construction sectors, it stands out with APEO-free, formaldehyde-free, and VOC-free labeling. This product offers corrosion resistance, a balanced set of properties, low flash rust, and matting features. Suitable for 1K coatings, epoxy coatings, primers, and waterborne coatings, it is compatible with epoxies and adheres well to metal and wood substrates.

ADDAPT Chemicals BV

Anticor™ A40

ADDAPT Anticor A40 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxy Amides. All constituents are EINECS registered and comply with the FDA regulation.

Habich

Habicor® ZP 3860

Habicor® ZP 3860 is a Zinc phosphate based anticorrosive pigment, Chemical Structure is Zinc phosphate dihydrate.

Ceramisphere

INHIBISPHERES® A

INHIBISPHERES® A is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® A is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® A is metal-free. INHIBISPHERES® A is added at different levels extend the duration of corrosion protection in the coating.

Delaphos

Delaphos® 2M

Delaphos® 2M is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Applied Graphene Materials

Genable® 3000

Genable® 3000 dispersion consists of graphene nanoplatelets stabilized in epoxy resin (EEW = 190g/eq.). The graphene nanoplatelets are a synthesized form of graphene produced by a patented process. A formulation-ready Genable® epoxy resin, Genable® 3000 dispersion has been developed to enhance the anti-corrosion performance of coatings on steel substrates by the use of a patented active, non-metallic anti-corrosion additive.

Habich

Habicor® ZC

Habicor® ZC is a Zinc phosphate based anticorrosive pigment. Chemical Structure is Modified zinc calcium phosphate.

Genesee Polymers

Genesee Polymers GP-6

Genesee Polymers' GP-6 SILICONE FLUID is an amine functional silicone polymer with the following structure where x = 100 and y = 4: The amine-alkyl functionality of GP-6 provides a versatile reaction site for the synthesis of a variety of functional silicone polymers and silicone-organic copolymers. The polar amine groups in GP-6 SILICONE FLUID also demonstrate high affinity for many substrates, suggesting use of GP-6 in textile lubricants, plastic and rubber release and lubrication, and in car polish formulations. GP-6 SILICONE FLUID is compatible with dimethyl silicone fluids, and with aliphatic, aromatic and chlorinated solvents.

Applied Graphene Materials

Genable® 2401

Genable® 2401 dispersion consists of graphene nanoplatelets dispersed in epoxy resin (EEW = 250g/eq.). The graphene nanoplatelets are a synthesized form of graphene produced by a patented process. A formulation-ready Genable® epoxy resin, Genable® 2401 dispersion has been developed to enhance the anti-corrosion performance of coatings on aluminum substrates by the use of a patented anti-corrosion additive.

Ceramisphere

INHIBISPHERES® ZS

INHIBISPHERES® ZS is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZS is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® ZS (ISZS) releases quickly to slow corrosion in the scribe (250 hours).

Ceramisphere

INHIBISPHERES® M

INHIBISPHERES® M is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® M is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® M is metal-free. Low levels of INHIBISPHERES® M give superior performance when compared to traditional corrosion inhibitors on steel.

ADDAPT Chemicals BV

BioWet™ 60G

ADDAPT BioWet 60 is a solvent free, ready biodegradable Glass Adhesion promoter and Glass Corrosion inhibitor for aqueous systems on glass substrates. A proprietary blend of PolyAlkylene Glycols and Polyhydroxy – Amide. All constituents are EINECS registered and comply with the FDA regulation (incidental contact with foodstuff).

ICL Phosphate Specialty - HALOX®

HALOX® 630

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

ICL Phosphate Specialty - HALOX®

HALOX® 700

HALOX® 700 is a white, non-refractive, corrosion-inhibiting pigment used in protective coatings. It provides extended protection in solvent-based and water-based epoxy and urethane coatings through the combination of zinc and aluminum phosphates. When used in alkyd and acrylic coatings, it is recommended to use it in combination with HALOX® Organic Corrosion Inhibitors for optimal performance.

ICL Phosphate Specialty - HALOX®

HALOX® Z-PLEX® 111

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

ICL Phosphate Specialty - HALOX®

HALOX® SZP-391

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

ICL Phosphate Specialty - HALOX®

HALOX® 550

HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor designed for corrosion protection in thin film coatings such as water and solvent-based finishes, high gloss DTM, conventional primers, acrylic clear coats, fast-drying lacquers, wash primers, anti-fingerprint coatings, and conversion coatings. It also increases hydrophobicity and is pH stable, making it compatible with both waterborne and solventborne coatings.

ICL Phosphate Specialty - HALOX®

HALOX® 520

HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne coating systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems. It may also be used as a metal pretreatment additive.

ICL Phosphate Specialty - HALOX®

HALOX® 430 JM

HALOX® 430 JM is a non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 JM is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

ICL Phosphate Specialty - HALOX®

HALOX® SW-111

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

ICL Phosphate Specialty - HALOX®

HALOX® CW-314

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

ICL Phosphate Specialty - HALOX®

HALOX® SZP-391 JM

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

ICL Phosphate Specialty - HALOX®

HALOX® Z-PLEX® 250

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion-inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate) and is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. The recommended loading levels for HALOX® Z-PLEX® 250 range from 5–10% based on the total formula weight.

ICL Phosphate Specialty - HALOX®

HALOX® 570 LS

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

ICL Phosphate Specialty - HALOX®

HALOX® 570

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

ICL Phosphate Specialty - HALOX®

HALOX® 550 WF

HALOX® 550 WF is a water-free (WF) corrosion inhibitor and adhesion promoter that uses a sol-gel-based formula. It is designed to protect a variety of coatings, including waterborne and solventborne clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. This product is suitable for use in low-pH and acid-catalyzed systems.

ICL Phosphate Specialty - HALOX®

HALOX® SZP-395

HALOX® SZP-395 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-395 is the most efficient and versatile corrosion-inhibiting pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin film applications (<1 mil or 25 microns).

ICL Phosphate Specialty - HALOX®

HALOX® 430

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

ICL Phosphate Specialty - HALOX®

HALOX® 350

HALOX® 350 is a highly active organic corrosion inhibitor with 97–100% solids, specifically designed to prevent flash rust and in-can corrosion while also providing temporary corrosion protection. This product is an effective alternative to toxic nitrite-based flash rust inhibitors. It is in the form of a slightly yellow powder.

ICL Phosphate Specialty - HALOX®

HALOX® Zinc Phosphate

HALOX® Zinc Phosphate is a white, non-refractive, corrosion-inhibiting pigment that is widely used in protective coating systems. It is also known as zinc phosphate-dihydrate and is characterized by a narrow particle size distribution, with an upper particle size limit of 10 microns and a mean particle size of 5 microns. This pigment is highly versatile and serves as a standard corrosion inhibitor for most high-performance resin systems, including vinyl, chlorinated rubbers, and epoxies. It is especially recommended for high acid-value resins, catalyzed baking systems, and vinylidene chloride latexes. In addition, HALOX® Zinc Phosphate is an ideal choice for thin film applications (less than 1 mil or 25 microns). It meets the ASTM D 6280-98 specification for zinc phosphate pigment type I and is widely used in the industry.

Kimes Technologies International

JALPON™ 1300A

Jalpon™ 1300A is a thixotropic gelled overbased calcium sulfonate in mineral spirits containing waxes and other proprietary ingredients. A variety of solvent-based industrial coatings can be made by incorporating materials such as resins, waxes, asphalts, oils and/or other ingredients. Specialty coatings can be developed which impart superior corrosion protection, flow control, high film build, and sag resistance.

Hightac

flashproTAC F2M

flashproTAC F2M is a flashrust inhibitor for iron & steel, mainly for paint & coating applications. Because of its unique formulation (contrary to nearly all other FRI´s) it has a very good tox profile and no labeling.

Kimes Technologies International

JALPON™ 1400EX

The Jalpon™ 1400EX is stable emulsions of gelled calcium sulfonate in water, featuring low VOC and low odor. The products in this emulsion series are compatible with a wide range of waterborne and water dispersible resin systems. Jalpon™ 1400A contains an extra component for barrier protection while Jalpon™ 1400EX contains significantly more active calcium sulfonate for increased surface wetting in more demanding applications.

Kimes Technologies International

JALPON™ 1500A

Jalpon™ 1500A is a rust preventive base compound that is comprised primarily of gelled calcium sulfonate and a proprietary wax blend. The combination of high non-volatiles and moderately high viscosity will produce firm and waxy films that performs well under severe conditions, particularly salt environments. This product can be used “as is”, further diluted or formulated, using a variety of compatible coating components.