products in Coatings & Finishes: Resin

Primex Plastics

Prime Weather-X ML500

Prime Weather-X ML500 is a multi layer sheet structure of up to 5 layers but is typically 3 consisting of Acrylic, ASA and ABS. An acrylic clear coat finish provides a hard, stain resistant surface that has excellent gloss, depth of image, chemical resistance and surface hardness. This layering technique provides superior UV protection, color stability and ease of formability.

SEIKO PMC

SEIKO PMC X-220

Seiko PMC X-220 is styrene-maleic acid resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

SEIKO PMC

SEIKO PMC YS-1274

Seiko PMC YS-1274 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Ceramer GmbH

Ceramer 60 LF

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Primex Plastics

Prime Weather X ML200

Prime Weather X ML200 offers one of the highest esthetics, gloss and depth of image in the industry, our Prime ABS Weather X ML 200 may consist of 3 5 layers but is typically 3 consisting of clear acrylic, colored acrylic and ABS. Key properties are surface hardness, chemical resistance, weatherability , toughness and excellent formability.

SEIKO PMC

SEIKO PMC X-1

Seiko PMC X-1 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Ecopower Chemical

Ecopower Chemical HT9120

HT9120 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9120 is a transparent granular solid with the color of yellow to light brown. HT9120 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Ceramer GmbH

Ceramer 20

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Primex Plastics

Prime ABS Weather-X 100

Prime ABS Weather-X 100 is an ABS substrate with an acrylic co extruded cap. If requested a thin layer of acrylic can be extruded on the back side for rigidizing. It offers good weatherability , chemical resistance, and high gloss with good DOI.

Ecopower Chemical

Ecopower Chemical HT9110

HT9110 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9110 is a transparent granular solid with the color of yellow to light brown. HT9110 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Primex Plastics

Prime ABS Weather-X 500

Prime ABS Weather-X 500 is an ABS substrate with a co extruded cap of an advanced Amorphous Terpolymer of Acrylic Styrene Acrylonitrile. It offers exceptional durability in weather related environments without painting or other types of UV protection. It can retain its color stability under long term exposure to the sun’s rays. It offers good esthetics, color options, good chemical resistance and high heat performance.

SEIKO PMC

SEIKO PMC VS-1063

Seiko PMC VS-1063 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Ecopower Chemical

Ecopower Chemical HT9100

HT9100 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9100 is a transparent granular solid with the color of yellow to light brown. HT9100 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Ceramer GmbH

Ceramerplus 20

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

SEIKO PMC

SEIKO PMC US-1071

Seiko PMC US-1071 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Ceramer GmbH

Ceramer 15

Ceramer 15 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Ceramer GmbH

Ceramer 60

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Polimeros Mexicanos

Polimeros Mexicanos Density+ Flow

Polimeros Mexicanos Density+ Flow has melt strength, rigidity and flow recommended for marine parts.

SEIKO PMC

SEIKO PMC X-228

Seiko PMC X-228 is styrene-maleic acid resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

Vikram Resins and Polymers

Vikram Resins and Polymers VRP 2141

Vikram Resins and Polymers VRP 2141 is a medium reactive PTA based Unsaturated Polyester Resin. It has better mechanical, corrosion, and electrical properties as compared to Orthophthalic Polyesters, has good wetting, and is fast curing. The properties of VRP 2141 are almost exactly the same as VRP 2131. It is suitable for hand lay-up, RTM, pultrusion, filament winding, and other molding techniques and can be used for the manufacture of marine products, tanks, pipes, automobile parts, gratings etc. Also, it can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.