Products in Automotive & Transportation: Hydrocarbons

PETROSOL D 20/26 is a fraction of hydrogenated kerosene, with an initial and final distillation range typically between 200°C and 260°C. Notably, it exhibits very low aromatic content and has a faint odor. Its low aromatic content and nearly imperceptible scent make it a versatile choice for various applications, including use in paints, varnishes, fuel, solvents, lubricants, multipurpose oils, drilling fluids, insecticides, home air fresheners, and as an efficient degreaser.

PETROSOL D 40 is a hydrogenated naphtha-kerosene blend featuring a typical distillation range between 150 and 200°C. This product boasts an exceptionally low aromatic content and a barely discernible odor. Due to its minimal aromatic content and nearly odorless nature, PETROSOL D 40 finds application in various industries, including paint and varnish production, as a fuel source, a versatile solvent, a component in lubricants and multipurpose oils, drilling fluid formulations, insecticides, home air fresheners, and as an effective degreaser.

Cardolite® Lite 2100 is a low color and low viscosity cashew nutshell liquid modified hydrocarbon resin recommended as an epoxy modifier for use in adhesives, coatings, and tar replacement. It enables high solids and solvent-free formulations, improves system compatibility for better film formation and protective performance, and provides excellent water, moisture, and corrosion resistance.

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

K-Ox™ P600/45 is a synthetic fatty acid made from petroleum hydrocarbons. K-Ox™ P600/45 may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. It is not subject to bacterial degradation as are the natural fats. K-Ox™ P600/45 is a rust preventive intermediate which is readily converted to a variety of metallic soaps.

LX®-2600 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

Petroleum Resin C9 ES 120H it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Kolon Industries SUKOREZ® SU-130 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-130 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Mediaplast PX-2 is a semi-synthetic plasticizer based on long-chain hydrocarbons with paraffinic character. It is recommended to use in elastomers with low polarity, e. g. NR, IIR, BR, SBR and EPDM.

Liaoning Liangang Pigment & Dyestuff Pigment Red 179 (Perylene Marron S-4180) is a high performance perylene pigments, which is widely used in automobile varnish and refinishing paint, plastics, inks and other industrial paint. it has strong light fastness and heat stability, and the color strength is also very high.

Kolon Industries SUKOREZ® SU-525 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-525 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

LESTAC P110 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Kolon Industries SUKOREZ® SU-100S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). It is also used as a binder for paint for fusion type roads. SUKOREZ® SU-100S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

NEVOXY® EPX-L2 is a low molecular weight, methyl styrenated phenol liquid hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

Octopol SIB is a high sulfur-containing hydrocarbon useful as an EP agent, film strength improver and mild oxidation inhibitor in the preparation of industrial gear oils, cutting oils, and metalworking applications and greases. The Octopol SIB demonstrates good solubility in mineral oils as well as great thermal stability. It is generally used with other components to produce additives and fluids for gear or metal-working applications. The recommended, typical treating range is 0.50 – 10 % depending on the application; however, it is suggested that lab testing information be used for acceptable performance levels

Petroleum Resin C9 ES 130 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Kolon Industries SUKOREZ® SU-110 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA).

LESTAC P100 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Petroleum Resin C9 ES 100 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Wind Turbine Gearbox Shield™ is the ultimate protection for the moving metal parts in gearboxes. Utilizing the most Advanced Boundary Film (ABF) Technology, it is carried to the contacting metal surfaces by the oil that is used in gearboxes. ABF reacts chemically with the contacting metal surfaces while improving lubricity and load carrying capacity on the metal surfaces to form a complex film of protection. ABF protects moving metal parts from heat, friction and wear in abrasion, extreme pressure torque, dry startup and shutdown. Increased performance and greatly reduced maintenance and downtime are the results. These performance goals are achieved through ABF Technology by lowering the operating temperatures, extending the life of component parts and increasing gearbox reliability.

LESTAC RT100 is pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic 1,3-pentadiene (1,3-piperlene) and some monomers derived from the process of thermal cracking of naphtha. The major usages are the binder for rubber compounding and tire,shoes,straps,etc, also can be tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength.

Copolymerized Petroleum Resin C5/C9-110 is Used in Rubber tires, HMAS, solvent-based pressure-sensitive, Adhesive

Kolon Industries SUKOREZ® SU-210 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-210 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Petroleum Resin C9 ES 100M it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Kolon Industries SUKOREZ® SU-400 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-400 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Puyang United Chemical C5 Petroleum Resin Q-1320 is 100% C5 Aliphatic hydrocarbon resin. The key feature of Q-1320 is high softening point and odorless. Q-1320 can replace some of terpene resin to save cost in adhesive production. Q-1320 is tackifying resin designed to provide high temperature performance and cohesive strength with a variety of adhesive polymers including metallocene polyolefins, APP, APAO, SIS block copolymers, natural rubber, synthetic polyisoprene, polyisobutylene and Butyl rubber. For APO & APAO base HMA, Q-1320 recommend for carpet layer adhesive, book binding adhesive, mattress bonding adhesive, wood working adhesive, automobile interiors adhesive, mouse trap adhesive, glass sealant and electrical adhesive tape etc.

LESTAC CY100 is pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic 1,3-pentadiene (1,3-piperlene) dicyclopentadiene and some monomers derived from the process of thermal cracking of naphtha. This resin have some smell but lower price than C5 aliphatic resin. The major usages are the binder for rubber and tire compound, strap, shoes,etc. also can be used tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength.

Liaoning Liangang Pigment & Dyestuff Pigment Red 179 (Perylene Marron S-0640) is a high performance perylene pigments, which is widely used in automobile varnish and refinishing paint, plastics, inks and other industrial paint. it has strong light fastness and heat stability, and the color strength is also very high.

HP 55 - A lubricant/homogenizer combination which improves the mixing behavior of rubber compounds and promotes dispersion of reinforcing materials such as carbon black. Benefits have been found in the tire industry, particularly where solution SBR and NR are used.

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Kolon Industries HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Petroleum Resin C9 ES 140 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

NEVOXY®EPX-L is a low molecular weight, methyl styrenated phenol liquid hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

Petroleum Resin C9 ES 120 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.