products in Automotive & Transportation: Aerospace Applications

3D Systems

Accura® CeraMAX

Accura® CeraMAX is a a rigid ceramic-reinforced composite with excellent thermal, moisture and abrasion resistance.applications heat and wear resistant components stiff/rigid assemblies and prototypes composite ceramic-like components esthetic components for art and archival models moisture stable components automotive and aerospace applications a plastic-ceramic composite high thermal resistance excellent abrasion resistance moisture resistant extremely rigid benefits esthetically beautiful white parts withstand temperatures of up to 220°C models that can withstand wear in aggressive applications components can survive in adverse thermal environments components can be plated parts retain properties & dimensions for extended durations.

Mitsubishi Chemical Group Corporation

METABLEN™ S 2030

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Precision Polymer Engineering

Precision Polymer™ N73B

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves

3D Systems

DuraForm® FR 100

DuraForm® FR 100 is halogen-free flame retardant plastic is suitable for Rapid Manufacturing of Aerospace and consumer products where flame retardancy and reduced smoke toxicity is required.In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today's human environmental safety for many other consumer applications.Applications Aerospace and aircraft cabin, compartment & cargo Computers Business equipment Electrical appliances Telecommunications equipment Building and structural components Transportation Complex, thin-walled ductwork Unmanned air vehicles (UAV's) Housings and enclosures Connectors Consumer goods and sporting products Vehicle dashboards and grilles Bumpers Rapid manufacturing Features Flame retardant Halogen and Antimony free FAR 25.853 (non-drip) compliant UL94 V-0 compliant Low smoke density and toxicity Excellent toughness and with good impact resistance Easy to process No emission of corrosive gasses Meets aerospace smoke density and toxicity requirements Benefits Offers toughness of injection molded plastics Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable custom parts Increase market opportunities through flame retardancy.

3D Systems

Accura® HPC

Saint-Gobain

Exac™ ECTFE

Exac ECTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Exac ECTFE include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Daikin Industries, Ltd.

Neoflon ETFE EP-610

Neoflon ETFE EP-610, available in pellet and solid forms, stands out with features such as excellent flexibility, good electrical properties, and a low melting point. Its applications span across automotive, consumer goods, electrical and electronics, and printing and packaging, finding use in aerospace, appliances, automotive electronics, and wire and cable insulation. With processing methods covering extrusion and injection molding, it offers versatility in various end uses.

BARLOG plastics GmbH

Kebaflow® LCP MX130

BARLOG plastics GmbH Kebaflow® LCP MX130 is an LCP reinforced with 30% short glass fiber / mineral mixture with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.

NuSil Technology

NuSil™ CF2-4721

NuSil™ CF2-4721 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone ResinComment: 75 Type D, Precatalyzed.

Boltaron Inc - A SIMONA Company

Boltaron® 9815F

Boltaron® 9815F is a thermoformable far-rated sheet with film.

Mitsubishi Chemical Group Corporation

METABLEN™ C 223A

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Mitsubishi Chemical Group Corporation

METABLEN™ S 2260

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Glassflake Limited

Nanoflake™ ECR GLASSFLAKE MICRONISED GF005-20

Glassflake Limited

ECR GLASSFLAKE™ MILLED GF300M

BARLOG plastics GmbH

Kebatron® PPS FWL1040G1

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

Momentive Performance Materials

Silopren™ LSR 2680 FC

3D Systems

DuraForm® ProX PA

Precision Polymer Engineering

Perlast® ICE G75LT

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

BCC Products

BCC Resins™ BC 4570

BC 4570 is a mulit-purpose paste designed for making quick repairs to a variety of substrates where service temperature exceeds 200°F (93°C). It is easy to mix and apply, cures in 15-20 minutes and can be readily shaped by filing, grinding, or machining thereafter. BC 4570 exhibits good adhesion to SMC, FRP, epoxy hi-heat molds, cast iron, aluminum, steel and many other surfaces. Featuring: heat resistance up to 425°F, excellent repair for aircraft/aerospace use, honeycomb core and foam core composite sealant, and repairs to SMC and FRP parts.

Greene Tweed

Fluoraz™ 797

This product is only available as a finished part, please contact Green, Tweed & Co. to discuss part availability, 215-216-9521.

Glassflake Limited

ECR GLASSFLAKE™ MILLED GF750M

Glassflake Limited

ECR GLASSFLAKE™ UNMILLED GF750

Glassflake Limited

ECR GLASSFLAKE™ MILLED GF100M

Glassflake Limited

Nanoflake™ Micronised GF007nm

Fluorseals

fluteck™ P2000

fluteck™ P2000 PTFE Premium Grade-USP Class VI is a high tech Virgin PTFE for Ram Extrusion, Compression and Isostatic molding, classified as medical grade according to the standard USP VI (50° C -122° F and 121° C – 250° F) and ISO 10993-1:2009.

Boltaron Inc - A SIMONA Company

Boltaron® 9815D

Boltaron® 9815D is a thermoformable far-rated sheet with embedded design.

3D Systems

Accura® Bluestone

Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

Precision Polymer Engineering

Precision Polymer™ N83B

N83B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N83B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN80.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace Applications

Saint-Gobain

Exac™ PTFE (EXTRUDED)

Exac PTFE (EXTRUDED) is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Applications of Exac PTFE (EXTRUDED) include aerospace, engineering/industrial parts, electrical/electronic applications, military applications and automotive.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Boltaron Inc - A SIMONA Company

Boltaron® 6530

Boltaron® 6530 is a far and UL 94 V-0 rated high impact resistant sheet.

3D Systems

DuraForm® PA

Durable polyamide (nylon) material for real-world physical testing and functional use.Applications Complex, thin-wall ductwork Functional prototypes that approach end-use performance properties Appropriate for low-to-mid-volume rapid manufacturing Medical applications requiring USP Class VI compliance, or biocompatibility Motorsports Aerospace Housing and enclosures Impellers and connectors Consumer sporting goods Vehicle dashboards and grilles Snap-fit designs Parts requiring machining or joining with adhesives Features Excellent surface resolution and feature detail Easy-to-process Compliant with USP Class VI testing Compatible with autoclave sterilization Good chemical resistance and low moisture absorption Benefits Nicely balanced mechanical properties and processability Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable parts as demanded by manufacturers Machinable and paintable for demonstration parts

BCC Products

BCC Resins™ MB1300

MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

Fluorseals

fluteck™ P1000

fluteck™ P1000 PTFE Standard Grade is Virgin PTFE for Ram Extrusion, Compression and Isostatic molding.

Nytef Plastics

MECHETEC PSU

MECHETEC® PSU (Polysulfone) is an amorphous high performance thermoplastic material that has proven performance at elevated temperatures. Good mechanical properties along with thermal stability allow for its use in load bearing applications over broad temperature ranges. Other notable attributes include flame retardant, excellent radiation resistance, and good chemical resistance. The ability of MECHETEC® PSU to withstand common sterilization techniques supports its use in numerous sanitary applications such as medical instruments and food processing machinery. MECHETEC® PSU stock shapes are amber in color and semi-transparent. They machine easily and are available in a full range of heavy gage rod and plate sizes. Formally known as Unifone PSU.

BARLOG plastics GmbH

Kebaflow® LCP HF140

BARLOG plastics GmbH Kebaflow® LCP HF140 is an LCP reinforced with 40% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 300 °C), good chemical resistance.

BARLOG plastics GmbH

Kebapeak® PEEK XS1300

PEEK, unreinforced