products in Automotive & Transportation: Cables

Wacker Chemie AG

ELASTOSIL® LR 3005/60 A/B

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

Wacker Chemie AG

ELASTOSIL® LR 3843/30 A/B

ELASTOSIL® LR 3843/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® LR 3842/70 A/B

ELASTOSIL® LR 3842/70 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® R 770/60 OH

ELASTOSIL® R 770/60 OH is a peroxide-crosslinked high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. It is used for construction, automotive, railway, marine, and aerospace applications where high flame retardancy is required. This product can be used within a temperature range of -55 °C to +210 °C.

Wacker Chemie AG

ELASTOSIL® LR 3844/40 A/B

ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® LR 3844/30 A/B

ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® LR 3844/50 A/B

ELASTOSIL® LR 3844/50 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® R 770/75 OH

ELASTOSIL® R 770/75 OH is a peroxide-crosslinked high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. The product has been tested according to BS 6853 Cat 1 and EN 45545-2 requirement sets R22 and R23 (HL3). It can be used within a temperature range of -55 °C to +210 °C.

Wacker Chemie AG

ELASTOSIL® LR 3842/50 A/B

ELASTOSIL® LR 3842/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® R 501/75 OH

ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.

Wacker Chemie AG

ELASTOSIL® LR 3852/50 A/B

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

Wacker Chemie AG

ELASTOSIL® LR 3842/60 A/B

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® LR 3846/20 A/B

ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

Wacker Chemie AG

ELASTOSIL® LR 3072/40 A/B

ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

Wacker Chemie AG

ELASTOSIL® LR 3846/30 A/B

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

Wacker Chemie AG

ELASTOSIL® R 500/70 OH

ELASTOSIL® R 500/70 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

Wacker Chemie AG

ELASTOSIL® LR 3004/40 A/B

ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie AG

ELASTOSIL® LR 3856/20 A/B

ELASTOSIL® LR 3856/20 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

Wacker Chemie AG

ELASTOSIL® LR 3841/50 A/B

ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Wacker Chemie AG

ELASTOSIL® LR 3851/50 A/B

ELASTOSIL® LR 3851/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3851 series. It is a paste-like, easily pigmentable, two-component product with a short curing time and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

Wacker Chemie AG

ELASTOSIL® LR 3072/50 A/B

ELASTOSIL® LR 3072/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

Wacker Chemie AG

GENIOSIL® XL 10

GENIOSIL® XL 10 is an alkoxyvinyl silane compound. When exposed to moisture, the silane undergoes hydrolysis, resulting in the release of methanol. This hydrolysis process leads to the formation of silanols, which have the ability to react with each other and form siloxanes. The applications of GENIOSIL® XL 10 include marine and protective coatings, plastic additives, and plastic crosslinking.

Wacker Chemie AG

ELASTOSIL® LR 3072/30 A/B

ELASTOSIL® LR 3072/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

Envalior

Arnitel® CM622

Arnitel® CM622, a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. In industries spanning automotive to E&E, it serves as a lighter, more intelligent, and eco-friendly replacement for traditional rubbers, effectively lowering environmental impact and system costs. Processed through extrusion and injection molding techniques, it features a hardness of 60 Shore D, primarily ideal for extrusion applications.

Envalior

Arnitel® CM550-S

Arnitel® CM550-S, a high-performance ThermoPlastic Copolyester (TPC) distinguished by its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing capabilities. In applications across automotive and E&E industries, it serves as a lighter, more intelligent, and environmentally friendly alternative to traditional rubber. Produced through extrusion technology, it boasts a hardness of 57 Shore D and is flame-retardant.

Envalior

Arnitel® CM551

Arnitel® CM551, a high-performance ThermoPlastic Copolyester (TPC) renowned for its remarkable blend of flexibility, high-temperature resistance, strength, and exceptional processing qualities. In industries like automotive and E&E, it serves as a lighter, more intelligent, and eco-friendly substitute for traditional rubber. Produced through extrusion and injection molding techniques, it exhibits impressive heat resistance properties.

Envalior

Arnitel® UM551

Arnitel® UM551 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM551 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. However, it's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM551 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

Envalior

Arnitel® CM620-S

Arnitel® CM620-S, a high-performance thermoplastic copolyester (TPC) celebrated for its remarkable blend of flexibility, high-temperature resistance, strength, and exceptional processing attributes. Across automotive and E&E industries, it stands out as a lighter, more intelligent, and eco-friendly substitute for traditional rubbers. Crafted through extrusion technology, it possesses a 64 Shore D hardness and is flame-retardant, meeting industry standards.

Envalior

Arnitel® CM600-V

Arnitel® CM600-V, a high-performance ThermoPlastic Copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and superior processing capabilities. In automotive and E&E industries, it serves as a lighter, more intelligent, and environmentally friendly replacement for conventional rubber. Crafted through extrusion and injection molding, it also boasts halogen-free flame-retardant properties.

SABIC's Specialties Business

ULTEM™ Resin AUT200G4

20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

SABIC's Specialties Business

NORYL™ Resin N1900

SABIC's Specialties Business NORYL™ N1900 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N1900 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *this grade is also referred to as NORYL™ N190 in several regions.

SABIC's Specialties Business

ULTEM™ Resin 2220

SABIC's Specialties Business ULTEM™ Resin 2220 is a high-flow resin with a 20% glass fiber reinforcement made from polyetherimide. This material is RoHS compliant and inherently flame retardant, without the need for any flame retardant additives, and offers a UL94 V0 rating at over 0.5 mm. It provides excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This opaque material can be custom colored, and SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which can be identified by differentiated color nomenclature.

SABIC's Specialties Business

NORYL™ Resin N190

SABIC's Specialties Business NORYL™ N190 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N190 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *This grade is also referred to as NORYL™ N1900 in several regions.

Dar-Tech Inc.

JetFil® M600c

JetFil® M600c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Dar-Tech Inc.

JetFil® 575P-575C

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

Dar-Tech Inc.

JetWhite 7D

JetWhite 7D is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.