products in Automotive & Transportation: Filler

20 Microns

Vaporlite® 90 (Uncoated)

Vaporlite® 90 (Uncoated) is the uncoated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

20 Microns

Micron China PPRC

Micron China PPRC belongs to 20 Microns' hard and soft clay range products which act as a reinforcing filler with huge techno-commercial benefits in rubber compounding formulation.

Glassflake Limited

E GLASSFLAKE MILLED GF100ME

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP90

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

20 Microns

20 Microns RBR Clay

RBR Clay belongs to 20 Microns' hard and soft clay range products which act as a reinforcing filler with huge techno-commercial benefits in rubber compounding formulation.

Cimbar Performance Minerals

CIMBAR® BF

Cimbar BF is a high purity, precipiated natural barium sulfate. Cimbar BF is recommended for use in coatings, especially automotive and industrial primers and topcoats. Additionally, Cimbar BF is often used in high gloss enamels, powder coatings and semi-gloss and gloss latexes.Cimbar BF can be used as a filler in plastics, cosmetics, batteries, and in pharamceutical applications. Cimbar BF is easily dispersable and is often used to impart higher surface gloss, improved hide, improved mar resistance and impact resistance.Cimbar BF also offers excellent sanding resistance, and good scrub resistance to formulations. Cimbar BF is chemically inert and is an excellent choice as a filler in corrosion resistant applications, flame retardant applications, and applications that require excellent weather resistance. Moreover, Cimbar BF exhibits superior thermal stabilty up to 1580 °C. It is therefore recommended for use in heat resistant applications.

20 Microns

Vaporlite® CTD (Coated)

Vaporlite® CTD (Coated) is a surface treated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

20 Microns

Hyper 60 DM

Hyper 60 DM is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS20

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS60

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Glassflake Limited

E GLASSFLAKE MICRONISED GF007E

20 Microns

Silfermin FLS 7

Longyan Shenghe

CENSIL 140G

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS10

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LKB90

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

Suncolor Corporation

SUNSPHERES™ 15.0

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

20 Microns

Hyperlink 66

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

20 Microns

20 Microns Coated Calcium Carbonate 3 T

LITHOS Industrial Minerals

LithoFill MM

The LithoFill product series is based on a very pure, natural clinoptilolite zeolite, which is characterized by a very high porosity and cation exchange capacity. Because of their high clinoptilolite content, these products act as functional additives with specific properties in various industrial applications. Due to the high cation exchange capacity of LithoFill, the product is able to bind and neutralize large quantities of molecules – this captures unwanted odors and liquids or releases specific flavours.

Atmos Technologies

Viplex 521

Viplex 521 is a general purpose extender for high oil loading PU systems.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP60

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Glassflake Limited

E GLASSFLAKE UNMILLED GF100E

HENZE BORON NITRIDE PRODUCTS

HeBoFill® CL-SP 015

HeBoFill® CL-SP 015 is a very pure boron nitride powder with an average particle size of 15 μm. This boron nitride grade has a low specific surface area combined with high crystallinity. This quality is particularly suitable as a filler and additive in polymers to increase the thermal conductivity without affecting the electrically insulating properties.

Longyan Shenghe

CENSIL 185G

Atmos Technologies

Viplex 530A

Viplex 530A is a general purpose PU extender with a moderate viscosity.

Glassflake Limited

E GLASSFLAKE UNMILLED GF750E

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP20

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Glassflake Limited

E GLASSFLAKE MILLED GF500ME

20 Microns

20 Microns Coated Calcium Carbonate 2 T

20 Microns

Hyper Tex C

20 Microns

20 Microns Mica 1240 PY

Atmos Technologies

Viplex 541

Viplex 541 is a general purpose extender for high oil loading PU systems.

20 Microns

DIATOFILL

Diatofill is a functional additive. Its efficiency results from the unique irregular particle shapes, tight particle size distribution, bright & white color, and refractive index similar to the polyolefin resin.

20 Microns

20 Microns Mica 1030 PY

20 Microns

20 Microns Talc Supreme

Suncolor Corporation

SUNSPHERES™ 03.0

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.