products in Automotive & Transportation: Initiator

Oxytop

Metox 30

Metox 30 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content is recommended for hardening gel coats, polymer concrete, some polyester varnishes and others. These initiators show an extended gelation time compared to Metox-50.

Pergan

PEROXAN AZDN

PEROXAN AZDN is 2,2'-Azodiisobutyronitrile 98%, Powder.PEROXAN AZDN is used for the (co)polymerization of styrene, vinylchloride, vinylidenechloride, acrylonitrile, acrylates and methacrylates.

Pergan

PERGAPROP HX-20 PP

PERGAPROP HX-20 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 20%, Granules with Polypropylen.PERGAPROP HX-20 PP is used for the production of controlled rheology polypropylene (CR-PP).

Pergan

PEROXAN EPC-50 WN-A

PEROXAN EPC-50 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 50%, in water and methanol.PEROXAN EPC-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Pergan

PEROXAN AEC

PEROXAN AEC is tert-Amyl peroxy 2-ethylhexyl carbonate 95%, Liquid.PEROXAN AEC is used for the (co)polymerization of styrene, acrylates and methacrylates.

Pergan

PEROXAN BHP-70

PEROXAN BHP-70 is tert-Butyl hydroperoxide 70%, Solution in water.PEROXAN BHP-70 is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber) as well as for the emulsion polymerization of vinylacetate, (meth-)acrylates and acrylic resins dispersions.PEROXAN BHP-70 is used for the curing of unsaturated polyester resins and polymerization of styrene alkyde mixtures.

Pergan

PEROXAN AHP

PEROXAN AHP is tert-Amyl hydroperoxide 80%, Solution in water.PEROXAN AHP is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/ butadiene/styrene (ABS rubber).

Oxytop

Metox BW85

Metox BW85 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

Oxytop

Cetox 50S

Cetox 50S is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-50 shows a shorter gelation time, while compared to the Metox-50 initiator, gives a lower exotherm and a more gradual cure. Can be used also in technologies related to the production of thick laminate layers and for button production.

Pergan

PEROXAN DC

PEROXAN DC is Dicumyl peroxide 99%, Crystallin.PEROXAN DC is used for the (co)polymerization of styrene. It may also be used as co-agent in the production of flame retardant, expandable polystyrenePEROXAN DC is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Pergan

PEROXAN IHP-50

PEROXAN IHP-50 is Di-isopropylbenzene-mono hydroperoxide 50%, Solution in diisopropylbenzene.PEROXAN IHP-50 is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber) as well as for the emulsion polymerization of (meth-)acrylates and acrylic resins dispersions.

Otsuka Chemical

Otsuka Chemical ADVN

Otsuka Chemical ADVN is used at Low-temperature polymerization application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

Pergan

PERGAPROP BIB-40 PP-G

PERGAPROP BIB-40 PP-G is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with Polypropylen.PERGAPROP BIB-40 PP-G is used for the production of controlled rheology polypropylene (CR-PP).

Oxytop

Metox 50

Metox 50 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content Metox-50 is recommended for hardening polymer concrete and some concrete polyester varnishes and others.

Pergan

PEROXAN CND-50 WN-A

PEROXAN CND-50 WN-A is Cumyl peroxyneodecanoate 50%, Emulsion in water in water and methanol.PEROXAN CND-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Oxytop

Cetox

Cetox-50 is a peroxide initiator for the copolymerization of unsaturated polyester resins. It is mainly used with cobalt accelerators at ambient temperature. Suitable for manual and spray lamination. In relation to the hardener Metox-50 it contains a lower amount of active oxygen, shows a longer copolymerization time and also a lower effect exothermic.

Pergan

PEROXAN HX

PEROXAN HX is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 92%, Liquid.PEROXAN HX is used for the production of controlled rheology polypropylene (CR-PP).PEROXAN HX is used for the curing of unsaturated polyester resins.PEROXAN HX is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Pergan

PEROXAN BEC

PEROXAN BEC is tert-Butyl peroxy 2-ethylhexyl carbonate 95%, Liquid.PEROXAN BEC is used for the (co)polymerization of ethylene, styrene, acrylates and methacrylates.PEROXAN BEC is used for the curing of unsaturated polyester resins.PEROXAN BEC is used for the crosslinking of EPDM, EPM, NBR and EVA (Ethyl Vinyl Acetate).

Pergan

PEROXAN EPC-60 WN-A

PEROXAN EPC-60 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 60%, Emulsion in water and methanol.PEROXAN EPC-60 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Pergan

PEROXAN BP-25 WD

PEROXAN BP-25 WD is Dibenzoylperoxide 75%, Powder , water damped.PEROXAN BP-25 WD is used for the (co)polymerization of styrene, acrylonitrile, vinylacetate, acrylates and methacrylates.

Pergan

PERGAPROP BIB-20 PP-FN

PERGAPROP BIB-20 PP-FN is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 20%, Granules with Polypropylen.PERGAPROP BIB-20 PP-FN is used for the production of controlled rheology polypropylene (CR-PP).

Otsuka Chemical

Otsuka Chemical MAIB

Otsuka Chemical MAIB is an AZO type initiator. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

Pergan

PEROXAN MI-60 KPX +

PEROXAN MI-60 KPX + is Mixture of Methyl isobutyl ketone peroxide and tert-Butyl peroxy benzoate Solution in TXIB.PEROXAN MI-60 KPX+ is used for the curing of unsaturated polyester resins as such or in presence of a cobalt accelerator in the temperature range of 60° to 150°C.

Bann Quimica

Banac MOR

Banac MOR has chemical composition of N-Oxydiethylene 2-benzothiazole sulfenamide and used as an accelerator.

Otsuka Chemical

Otsuka Chemical AIBN

Otsuka Chemical AIBN is used at medium temperature polymerization application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

Oxytop

Metox BW80

Metox BW80 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer. It states diluted form of the Metox-BW85 initiator.

Bann Quimica

Banac TMTD

Banac TMTD has chemical composition of Tetramethyl thiuram disulfide and used as an accelerator.

Bann Quimica

Banac DCBS

Banac DCBS has chemical composition of N,N-dicyclohexyl-2-benzothiazole sulfenamide and used as an accelerator.

Pergan

PEROXAN OHP

PEROXAN OHP is 1,1,3,3-Tetramethylbutyl hydroperoxide 85%, Solution in diisobutylene.PEROXAN OHP is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber) as well as for the emulsion polymerization of (meth-)acrylates and acrylic resins dispersions.

Oxytop

Metox VLHP90

Metox VLHP90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, the initiator contains a reduced content of hydrogen peroxide, water and methyl ethyl ketone. May be used for curing unsaturated polyester resins (UPR), gelcoats, in the presence of cobalt accelerator. Especially recommended for curing gel coats due to very low content of hydrogen peroxide, water and methyl ethyl ketone. This high purity initiator can be used wherever the use of Permix-MC96 is demonstrated too fast gelling. Compared to Metox-BW85, it has a shorter gel and hardening time.

Oxytop

Pentox 40

Pentox 40 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. These initiators are particularly suitable in those applications where it is required fast molding with transfer of the core, for example cold forming or in injection molding techniques. Compared to the Metox-50 hardener, they contain a lower amount of active oxygen. However, they show a similar one gel time and a greater exothermic effect, therefore, they are not recommended for use in production too thick layers in one operation, as well as for hardening gel coats.

Bann Quimica

Banac MBT

Banac MBT has chemical composition of 2-Mercaptobenzothiazole and used as an accelerator.

Oxytop

Metox 50W

Metox 50W is peroxide copolymerization initiator for unsaturated polyester resins. They are mainly used with cobalt accelerators to curing at ambient temperature. They are suitable for manual and spray lamination. They can be used, for example, for the production of polymer concrete. Compared to the hardener Metox-50 show a slightly extended gelation time. Due to the reduced water content Metox-50W is recommended for curing gel coats, some polyester varnishes and others.

Pergan

PEROXAN LP

PEROXAN LP is Dilauroyl peroxide 98%, Flakes.PEROXAN LP is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

Pergan

PERGAPROP HX-10 PP

PERGAPROP HX-10 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 10%, Granules with Polypropylen.PERGAPROP HX-10 PP is used for the production of controlled rheology polypropylene (CR-PP).

Pergan

PEROXAN BCC-75

PEROXAN BCC-75 is Di-(4-tert-butyl-cyclohexyl)-peroxydicarbonate 75%, Powder in water.PEROXAN BCC-75 is used for the (co)polymerization of vinylchloride and vinylidenechloride.